[PATCH v3 8/9] ARM: dts: sun8i: r40: Add MIPI DSI pipeline

[Jagan Teki]

Add MIPI DSI pipeline for Allwinner R40.

Unlike conventional Display pipeline in allwinner, R40 have
TCON TCOP which would interact various block like muxes,
tcon lcd, tcon_tv for better pipeline fitting.

For MIPI DSI pipeline, we have to configure the tcon_lcd0
block which would interact with tcon_top for upper pipeline
connections and dsi block for lower pipeline connections.

So, this patch created that pipeline by adding new nodes
for tcon_lcd0, dsi, dphy and connet them to make proper
pipeline fitting.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v3:
- drop clock-names in dsi node

 arch/arm/boot/dts/sun8i-r40.dtsi | 72 ++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 3faa35d43afa..4c61e93d9a0b 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -628,6 +628,7 @@
 
 					tcon_top_mixer0_out_tcon_lcd0: endpoint at 0 {
 						reg = <0>;
+						remote-endpoint = <&tcon_lcd0_in_tcon_top_mixer0>;
 					};
 
 					tcon_top_mixer0_out_tcon_lcd1: endpoint at 1 {
@@ -706,6 +707,45 @@
 			};
 		};
 
+		tcon_lcd0: lcd-controller at 1c71000 {
+			compatible = "allwinner,sun8i-r40-tcon-lcd";
+			reg = <0x01c71000 0x1000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_LCD0>, <&ccu CLK_TCON_LCD0>;
+			clock-names = "ahb", "tcon-ch0";
+			clock-output-names = "tcon-pixel-clock";
+			resets = <&ccu RST_BUS_TCON_LCD0>, <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd", "lvds";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_lcd0_in: port at 0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_lcd0_in_tcon_top_mixer0: endpoint at 0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_lcd0>;
+					};
+				};
+
+				tcon_lcd0_out: port at 1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_lcd0_out_dsi_out: endpoint at 1 {
+						reg = <1>;
+						remote-endpoint = <&dsi_in_tcon_lcd0_out>;
+					};
+				};
+			};
+		};
+
 		tcon_tv0: lcd-controller at 1c73000 {
 			compatible = "allwinner,sun8i-r40-tcon-tv";
 			reg = <0x01c73000 0x1000>;
@@ -803,6 +843,38 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		dsi: dsi at 1ca0000 {
+			compatible = "allwinner,sun8i-r40-mipi-dsi",
+				     "allwinner,sun50i-a64-mipi-dsi";
+			reg = <0x01ca0000 0x1000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>;
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			phys = <&dphy>;
+			phy-names = "dphy";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port {
+				dsi_in_tcon_lcd0_out: endpoint {
+					remote-endpoint = <&tcon_lcd0_out_dsi_out>;
+				};
+			};
+		};
+
+		dphy: d-phy at 1ca1000 {
+			compatible = "allwinner,sun8i-r40-mipi-dphy",
+				     "allwinner,sun6i-a31-mipi-dphy";
+			reg = <0x01ca1000 0x1000>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&tcon_top CLK_TCON_TOP_DSI>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
 		hdmi: hdmi at 1ee0000 {
 			compatible = "allwinner,sun8i-r40-dw-hdmi",
 				     "allwinner,sun8i-a83t-dw-hdmi";
-- 
2.18.0.321.gffc6fa0e3