[PATCH v2 3/4] drm/atomic: Add drm_atomic_state->duplicated
Daniel Vetter
daniel at ffwll.ch
Mon Feb 4 09:16:34 UTC 2019
On Fri, Feb 01, 2019 at 05:41:58PM -0500, Lyude Paul wrote:
> Important! below
>
> On Fri, 2019-02-01 at 18:57 +0100, Daniel Vetter wrote:
> > On Thu, Jan 31, 2019 at 08:14:50PM -0500, Lyude Paul wrote:
> > > Since
> > >
> > > commit 39b50c603878 ("drm/atomic_helper: Stop modesets on unregistered
> > > connectors harder")
> > >
> > > We've been failing atomic checks if they try to enable new displays on
> > > unregistered connectors. This is fine except for the one situation that
> > > breaks atomic assumptions: suspend/resume. If a connector is
> > > unregistered before we attempt to restore the atomic state, something we
> > > end up failing the atomic check that happens when trying to restore the
> > > state during resume.
> > >
> > > Normally this would be OK: we try our best to make sure that the atomic
> > > state pre-suspend can be restored post-suspend, but failures at that
> > > point usually don't cause problems. That is of course, until we
> > > introduced the new atomic MST VCPI helpers:
> > >
> > > [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:65:pipe B]
> > > active changed
> > > [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing
> > > for [CONNECTOR:123:DP-5]
> > > [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Disabling
> > > [CONNECTOR:123:DP-5]
> > > [drm:drm_atomic_get_private_obj_state [drm]] Added new private object
> > > 0000000025844636 state 000000009fd2899a to 000000003a13d7b8
> > > WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153
> > > drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
> > > Modules linked in: fuse vfat fat snd_hda_codec_hdmi snd_hda_codec_realtek
> > > snd_hda_codec_generic joydev iTCO_wdt i915(O) wmi_bmof intel_rapl btusb
> > > btrtl x86_pkg_temp_thermal btbcm btintel coretemp i2c_algo_bit
> > > drm_kms_helper(O) crc32_pclmul snd_hda_intel syscopyarea sysfillrect
> > > snd_hda_codec sysimgblt snd_hda_core bluetooth fb_sys_fops snd_pcm pcspkr
> > > drm(O) psmouse snd_timer mei_me ecdh_generic i2c_i801 mei i2c_core
> > > ucsi_acpi typec_ucsi typec wmi thinkpad_acpi ledtrig_audio snd soundcore
> > > tpm_tis rfkill tpm_tis_core video tpm acpi_pad pcc_cpufreq uas usb_storage
> > > crc32c_intel nvme serio_raw xhci_pci nvme_core xhci_hcd
> > > CPU: 6 PID: 1070 Comm: gnome-shell Tainted: G W O 5.0.0-
> > > rc2Lyude-Test+ #1
> > > Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 )
> > > 04/09/2018
> > > RIP: 0010:drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
> > > Code: 00 4c 39 6d f0 74 49 48 8d 7b 10 48 89 f9 48 c1 e9 03 42 80 3c 21 00
> > > 0f 85 d2 00 00 00 48 8b 6b 10 48 8d 5d f0 49 39 ee 75 c5 <0f> 0b 48 c7 c7
> > > c0 78 b3 a0 48 89 c2 4c 89 ee e8 03 6c aa ff b8 ea
> > > RSP: 0018:ffff88841235f268 EFLAGS: 00010246
> > > RAX: ffff88841bf12ab0 RBX: ffff88841bf12aa8 RCX: 1ffff110837e2557
> > > RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffffed108246bde0
> > > RBP: ffff88841bf12ab8 R08: ffffed1083db3c93 R09: ffffed1083db3c92
> > > R10: ffffed1083db3c92 R11: ffff88841ed9e497 R12: ffff888419555d80
> > > R13: ffff8883bc499100 R14: ffff88841bf12ab8 R15: 0000000000000000
> > > FS: 00007f16fbd4cd00(0000) GS:ffff88841ed80000(0000)
> > > knlGS:0000000000000000
> > > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > CR2: 00007f1687c9f000 CR3: 00000003ba3cc003 CR4: 00000000003606e0
> > > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > > DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> > > Call Trace:
> > > drm_atomic_helper_check_modeset+0xf21/0x2f50 [drm_kms_helper]
> > > ? drm_atomic_helper_commit_modeset_enables+0xa90/0xa90 [drm_kms_helper]
> > > ? __printk_safe_exit+0x10/0x10
> > > ? save_stack+0x8c/0xb0
> > > ? vprintk_func+0x96/0x1bf
> > > ? __printk_safe_exit+0x10/0x10
> > > intel_atomic_check+0x234/0x4750 [i915]
> > > ? printk+0x9f/0xc5
> > > ? kmsg_dump_rewind_nolock+0xd9/0xd9
> > > ? _raw_spin_lock_irqsave+0xa4/0x140
> > > ? drm_atomic_check_only+0xb1/0x28b0 [drm]
> > > ? drm_dbg+0x186/0x1b0 [drm]
> > > ? drm_dev_dbg+0x200/0x200 [drm]
> > > ? intel_link_compute_m_n+0xb0/0xb0 [i915]
> > > ? drm_mode_put_tile_group+0x20/0x20 [drm]
> > > ? skl_plane_format_mod_supported+0x17f/0x1b0 [i915]
> > > ? drm_plane_check_pixel_format+0x14a/0x310 [drm]
> > > drm_atomic_check_only+0x13c4/0x28b0 [drm]
> > > ? drm_state_info+0x220/0x220 [drm]
> > > ? drm_atomic_helper_disable_plane+0x1d0/0x1d0 [drm_kms_helper]
> > > ? pick_single_encoder_for_connector+0xe0/0xe0 [drm_kms_helper]
> > > ? kasan_unpoison_shadow+0x35/0x40
> > > drm_atomic_commit+0x3b/0x100 [drm]
> > > drm_atomic_helper_set_config+0xd5/0x100 [drm_kms_helper]
> > > drm_mode_setcrtc+0x636/0x1660 [drm]
> > > ? vprintk_func+0x96/0x1bf
> > > ? drm_dev_dbg+0x200/0x200 [drm]
> > > ? drm_mode_getcrtc+0x790/0x790 [drm]
> > > ? printk+0x9f/0xc5
> > > ? mutex_unlock+0x1d/0x40
> > > ? drm_mode_addfb2+0x2e9/0x3a0 [drm]
> > > ? rcu_sync_dtor+0x2e0/0x2e0
> > > ? drm_dbg+0x186/0x1b0 [drm]
> > > ? set_page_dirty+0x271/0x4d0
> > > drm_ioctl_kernel+0x203/0x290 [drm]
> > > ? drm_mode_getcrtc+0x790/0x790 [drm]
> > > ? drm_setversion+0x7f0/0x7f0 [drm]
> > > ? __switch_to_asm+0x34/0x70
> > > ? __switch_to_asm+0x34/0x70
> > > drm_ioctl+0x445/0x950 [drm]
> > > ? drm_mode_getcrtc+0x790/0x790 [drm]
> > > ? drm_getunique+0x220/0x220 [drm]
> > > ? expand_files.part.10+0x920/0x920
> > > do_vfs_ioctl+0x1a1/0x13d0
> > > ? ioctl_preallocate+0x2b0/0x2b0
> > > ? __fget_light+0x2d6/0x390
> > > ? schedule+0xd7/0x2e0
> > > ? fget_raw+0x10/0x10
> > > ? apic_timer_interrupt+0xa/0x20
> > > ? apic_timer_interrupt+0xa/0x20
> > > ? rcu_cleanup_dead_rnp+0x2c0/0x2c0
> > > ksys_ioctl+0x60/0x90
> > > __x64_sys_ioctl+0x6f/0xb0
> > > do_syscall_64+0x136/0x440
> > > ? syscall_return_slowpath+0x2d0/0x2d0
> > > ? do_page_fault+0x89/0x330
> > > ? __do_page_fault+0x9c0/0x9c0
> > > ? prepare_exit_to_usermode+0x188/0x200
> > > ? perf_trace_sys_enter+0x1090/0x1090
> > > ? __x64_sys_sigaltstack+0x280/0x280
> > > ? __put_user_4+0x1c/0x30
> > > entry_SYSCALL_64_after_hwframe+0x44/0xa9
> > > RIP: 0033:0x7f16ff89a09b
> > > Code: 0f 1e fa 48 8b 05 ed bd 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff
> > > ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff
> > > ff 73 01 c3 48 8b 0d bd bd 0c 00 f7 d8 64 89 01 48
> > > RSP: 002b:00007fff001232b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
> > > RAX: ffffffffffffffda RBX: 00007fff001232f0 RCX: 00007f16ff89a09b
> > > RDX: 00007fff001232f0 RSI: 00000000c06864a2 RDI: 000000000000000b
> > > RBP: 00007fff001232f0 R08: 0000000000000000 R09: 000055a79d484460
> > > R10: 000055a79d44e770 R11: 0000000000000246 R12: 00000000c06864a2
> > > R13: 000000000000000b R14: 0000000000000000 R15: 000055a79d44e770
> > > WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153
> > > drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
> > > ---[ end trace d536c05c13c83be2 ]---
> > > [drm:drm_dp_atomic_release_vcpi_slots [drm_kms_helper]] *ERROR* no VCPI
> > > for [MST PORT:00000000f9e2b143] found in mst state 000000009fd2899a
> > >
> > > This appears to be happening because we destroy the VCPI allocations
> > > when disabling all connected displays while suspending, and those VCPI
> > > allocations don't get restored on resume due to failing to restore the
> > > atomic state.
> > >
> > > So, fix this by introducing the suspending option to
> > > drm_atomic_helper_duplicate_state() and use that to indicate in the
> > > atomic state that it's being used for suspending or resuming the system,
> > > and thus needs to be fixed up by the driver. We can then use the new
> > > state->duplicated hook to tell update_connector_routing() in
> > > drm_atomic_check_modeset() to allow for modesets on unregistered
> > > connectors, which allows us to restore atomic states that contain MST
> > > topologies that were removed after the state was duplicated and thus:
> > > mostly fixing suspend and resume. This just leaves some issues that were
> > > introduced with nouveau, that will be addressed next.
> > >
> > > Changes since v2:
> > > * Remove the changes in this patch to the VCPI helpers, they aren't
> > > needed anymore
> > > Changes since v1:
> > > * Rename suspend_or_resume to duplicated
> > >
> > > Signed-off-by: Lyude Paul <lyude at redhat.com>
> > > Fixes: eceae1472467 ("drm/dp_mst: Start tracking per-port VCPI
> > > allocations")
> > > Cc: Daniel Vetter <daniel at ffwll.ch>
> > > ---
> > > drivers/gpu/drm/drm_atomic_helper.c | 10 +++++++++-
> > > drivers/gpu/drm/drm_dp_mst_topology.c | 28 +++++++++++++++++++++++++++
> > > include/drm/drm_atomic.h | 9 +++++++++
> > > 3 files changed, 46 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/gpu/drm/drm_atomic_helper.c
> > > b/drivers/gpu/drm/drm_atomic_helper.c
> > > index 6fe2303fccd9..f578bf1fe164 100644
> > > --- a/drivers/gpu/drm/drm_atomic_helper.c
> > > +++ b/drivers/gpu/drm/drm_atomic_helper.c
> > > @@ -332,8 +332,15 @@ update_connector_routing(struct drm_atomic_state
> > > *state,
> > > * about is ensuring that userspace can't do anything but shut off the
> > > * display on a connector that was destroyed after its been notified,
> > > * not before.
> > > + *
> > > + * Additionally, we also want to ignore connector registration when
> > > + * we're trying to restore an atomic state during system resume since
> > > + * there's a chance the connector may have been destroyed during the
> > > + * process, but it's better to ignore that then cause
> > > + * drm_atomic_helper_resume() to fail.
> > > */
> > > - if (drm_connector_is_unregistered(connector) && crtc_state->active) {
> > > + if (!state->duplicated && drm_connector_is_unregistered(connector) &&
> > > + crtc_state->active) {
> > > DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] is not registered\n",
> > > connector->base.id, connector->name);
> > > return -EINVAL;
> > > @@ -3180,6 +3187,7 @@ drm_atomic_helper_duplicate_state(struct drm_device
> > > *dev,
> > > return ERR_PTR(-ENOMEM);
> > >
> > > state->acquire_ctx = ctx;
> > > + state->duplicated = true;
> > >
> > > drm_for_each_crtc(crtc, dev) {
> > > struct drm_crtc_state *crtc_state;
> > > diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c
> > > b/drivers/gpu/drm/drm_dp_mst_topology.c
> > > index 4325e1518286..ea1540ea67af 100644
> > > --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> > > +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> > > @@ -3097,6 +3097,10 @@ static int drm_dp_init_vcpi(struct
> > > drm_dp_mst_topology_mgr *mgr,
> > > * @port as needed. It is not OK however, to call this function and
> > > * drm_dp_atomic_release_vcpi_slots() in the same atomic check phase.
> > > *
> > > + * When &drm_atomic_state.duplicated is set to %true%, this function will
> > > not
> > > + * perform any error checking and will instead simply return the
> > > previously
> > > + * recorded VCPI allocations.
> > > + *
> > > * See also:
> > > * drm_dp_atomic_release_vcpi_slots()
> > > * drm_dp_mst_atomic_check()
> > > @@ -3123,6 +3127,19 @@ int drm_dp_atomic_find_vcpi_slots(struct
> > > drm_atomic_state *state,
> > > vcpi = pos;
> > > prev_slots = vcpi->vcpi;
> > >
> > > + /*
> > > + * When resuming, we just want to restore the previous
> > > + * VCPI without doing error checking
> > > + */
> > > + if (state->duplicated) {
> > > + DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] [MST
> > > PORT:%p] restoring VCPI of %d\n",
> > > + port->connector->base.id,
> > > + port->connector->name,
> > > + port, prev_slots);
> > > +
> > > + return prev_slots;
> > > + }
> > > +
>
> Gah, hold on-part of the point of this was that we didn't need to put special
> casing for ->duplicated into the VCPI helpers but it looks like I left that
> chunk in by accident, whoops.
>
> So, the hunk above this comment ^ (more below)
>
> > > /*
> > > * This should never happen, unless the driver tries
> > > * releasing and allocating the same VCPI allocation,
> > > @@ -3181,6 +3198,11 @@ EXPORT_SYMBOL(drm_dp_atomic_find_vcpi_slots);
> > > * drm_dp_atomic_find_vcpi_slots() on the same @port in a single atomic
> > > check
> > > * phase.
> > > *
> > > + * When &drm_atomic_state.duplicated is set, this function will not
> > > + * modify the VCPI allocations in &drm_dp_mst_topology_state.vcpis, so
> > > that
> > > + * those VCPI allocations may be restored as-is from the duplicated
> > > state. In
> > > + * this scenario, this function will always return 0.
> > > + *
> > > * See also:
> > > * drm_dp_atomic_find_vcpi_slots()
> > > * drm_dp_mst_atomic_check()
> > > @@ -3197,6 +3219,12 @@ int drm_dp_atomic_release_vcpi_slots(struct
> > > drm_atomic_state *state,
> > > struct drm_dp_vcpi_allocation *pos;
> > > bool found = false;
> > >
> > > + /* During suspend, just keep our VCPI allocations as-is in the atomic
> > > + * state so they can be restored as-is at resume
> > > + */
> > > + if (state->duplicated)
> > > + return 0;
> > > +
> And the hunk above this comment aren't needed or supposed to be here anymore.
> Does your R-B still count?
Huh, I convinced myself that we still need these (and that the goal of
this series was to get the is_unregistered() checks out of the drivers).
Can you pls resend with that twist (in-reply-to here or whatever) so that
intel CI can check this, and I get some time to ponder where exactly I've
gone off the rails with my thinking?
Thanks, Daniel
> > > topology_state = drm_atomic_get_mst_topology_state(state, mgr);
> > > if (IS_ERR(topology_state))
> > > return PTR_ERR(topology_state);
> > > diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h
> > > index 811b4a92568f..961c792fa98b 100644
> > > --- a/include/drm/drm_atomic.h
> > > +++ b/include/drm/drm_atomic.h
> > > @@ -329,6 +329,15 @@ struct drm_atomic_state {
> > > bool allow_modeset : 1;
> > > bool legacy_cursor_update : 1;
> > > bool async_update : 1;
> > > + /**
> > > + * @duplicated:
> > > + *
> > > + * Indicates whether or not this atomic state was duplicated using
> > > + * drm_atomic_helper_duplicate_state(). Drivers and atomic helpers
> > > + * should use this to fixup normal inconsistencies in duplicated
> >
> > s/normal/expected/ maybe? Not too sure about the nuances of English here.
> > Also double space right afterwards.
> >
> > With or without the bikeshed (but pls remove the double space because
> > ocd):
> >
> > Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> >
> > Cheers, Daniel
> >
> > > + * states.
> > > + */
> > > + bool duplicated : 1;
> > > struct __drm_planes_state *planes;
> > > struct __drm_crtcs_state *crtcs;
> > > int num_connector;
> > > --
> > > 2.20.1
> > >
> --
> Cheers,
> Lyude Paul
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the dri-devel
mailing list