[PATCH v3 3/4] drm/atomic: Add drm_atomic_state->duplicated
Daniel Vetter
daniel at ffwll.ch
Mon Feb 4 10:04:37 UTC 2019
On Fri, Feb 01, 2019 at 07:20:03PM -0500, Lyude Paul wrote:
> Since
>
> commit 39b50c603878 ("drm/atomic_helper: Stop modesets on unregistered
> connectors harder")
>
> We've been failing atomic checks if they try to enable new displays on
> unregistered connectors. This is fine except for the one situation that
> breaks atomic assumptions: suspend/resume. If a connector is
> unregistered before we attempt to restore the atomic state, something we
> end up failing the atomic check that happens when trying to restore the
> state during resume.
>
> Normally this would be OK: we try our best to make sure that the atomic
> state pre-suspend can be restored post-suspend, but failures at that
> point usually don't cause problems. That is of course, until we
> introduced the new atomic MST VCPI helpers:
>
> [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:65:pipe B] active changed
> [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:123:DP-5]
> [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Disabling [CONNECTOR:123:DP-5]
> [drm:drm_atomic_get_private_obj_state [drm]] Added new private object 0000000025844636 state 000000009fd2899a to 000000003a13d7b8
> WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153 drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
> Modules linked in: fuse vfat fat snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic joydev iTCO_wdt i915(O) wmi_bmof intel_rapl btusb btrtl x86_pkg_temp_thermal btbcm btintel coretemp i2c_algo_bit drm_kms_helper(O) crc32_pclmul snd_hda_intel syscopyarea sysfillrect snd_hda_codec sysimgblt snd_hda_core bluetooth fb_sys_fops snd_pcm pcspkr drm(O) psmouse snd_timer mei_me ecdh_generic i2c_i801 mei i2c_core ucsi_acpi typec_ucsi typec wmi thinkpad_acpi ledtrig_audio snd soundcore tpm_tis rfkill tpm_tis_core video tpm acpi_pad pcc_cpufreq uas usb_storage crc32c_intel nvme serio_raw xhci_pci nvme_core xhci_hcd
> CPU: 6 PID: 1070 Comm: gnome-shell Tainted: G W O 5.0.0-rc2Lyude-Test+ #1
> Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 ) 04/09/2018
> RIP: 0010:drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
> Code: 00 4c 39 6d f0 74 49 48 8d 7b 10 48 89 f9 48 c1 e9 03 42 80 3c 21 00 0f 85 d2 00 00 00 48 8b 6b 10 48 8d 5d f0 49 39 ee 75 c5 <0f> 0b 48 c7 c7 c0 78 b3 a0 48 89 c2 4c 89 ee e8 03 6c aa ff b8 ea
> RSP: 0018:ffff88841235f268 EFLAGS: 00010246
> RAX: ffff88841bf12ab0 RBX: ffff88841bf12aa8 RCX: 1ffff110837e2557
> RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffffed108246bde0
> RBP: ffff88841bf12ab8 R08: ffffed1083db3c93 R09: ffffed1083db3c92
> R10: ffffed1083db3c92 R11: ffff88841ed9e497 R12: ffff888419555d80
> R13: ffff8883bc499100 R14: ffff88841bf12ab8 R15: 0000000000000000
> FS: 00007f16fbd4cd00(0000) GS:ffff88841ed80000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 00007f1687c9f000 CR3: 00000003ba3cc003 CR4: 00000000003606e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> Call Trace:
> drm_atomic_helper_check_modeset+0xf21/0x2f50 [drm_kms_helper]
> ? drm_atomic_helper_commit_modeset_enables+0xa90/0xa90 [drm_kms_helper]
> ? __printk_safe_exit+0x10/0x10
> ? save_stack+0x8c/0xb0
> ? vprintk_func+0x96/0x1bf
> ? __printk_safe_exit+0x10/0x10
> intel_atomic_check+0x234/0x4750 [i915]
> ? printk+0x9f/0xc5
> ? kmsg_dump_rewind_nolock+0xd9/0xd9
> ? _raw_spin_lock_irqsave+0xa4/0x140
> ? drm_atomic_check_only+0xb1/0x28b0 [drm]
> ? drm_dbg+0x186/0x1b0 [drm]
> ? drm_dev_dbg+0x200/0x200 [drm]
> ? intel_link_compute_m_n+0xb0/0xb0 [i915]
> ? drm_mode_put_tile_group+0x20/0x20 [drm]
> ? skl_plane_format_mod_supported+0x17f/0x1b0 [i915]
> ? drm_plane_check_pixel_format+0x14a/0x310 [drm]
> drm_atomic_check_only+0x13c4/0x28b0 [drm]
> ? drm_state_info+0x220/0x220 [drm]
> ? drm_atomic_helper_disable_plane+0x1d0/0x1d0 [drm_kms_helper]
> ? pick_single_encoder_for_connector+0xe0/0xe0 [drm_kms_helper]
> ? kasan_unpoison_shadow+0x35/0x40
> drm_atomic_commit+0x3b/0x100 [drm]
> drm_atomic_helper_set_config+0xd5/0x100 [drm_kms_helper]
> drm_mode_setcrtc+0x636/0x1660 [drm]
> ? vprintk_func+0x96/0x1bf
> ? drm_dev_dbg+0x200/0x200 [drm]
> ? drm_mode_getcrtc+0x790/0x790 [drm]
> ? printk+0x9f/0xc5
> ? mutex_unlock+0x1d/0x40
> ? drm_mode_addfb2+0x2e9/0x3a0 [drm]
> ? rcu_sync_dtor+0x2e0/0x2e0
> ? drm_dbg+0x186/0x1b0 [drm]
> ? set_page_dirty+0x271/0x4d0
> drm_ioctl_kernel+0x203/0x290 [drm]
> ? drm_mode_getcrtc+0x790/0x790 [drm]
> ? drm_setversion+0x7f0/0x7f0 [drm]
> ? __switch_to_asm+0x34/0x70
> ? __switch_to_asm+0x34/0x70
> drm_ioctl+0x445/0x950 [drm]
> ? drm_mode_getcrtc+0x790/0x790 [drm]
> ? drm_getunique+0x220/0x220 [drm]
> ? expand_files.part.10+0x920/0x920
> do_vfs_ioctl+0x1a1/0x13d0
> ? ioctl_preallocate+0x2b0/0x2b0
> ? __fget_light+0x2d6/0x390
> ? schedule+0xd7/0x2e0
> ? fget_raw+0x10/0x10
> ? apic_timer_interrupt+0xa/0x20
> ? apic_timer_interrupt+0xa/0x20
> ? rcu_cleanup_dead_rnp+0x2c0/0x2c0
> ksys_ioctl+0x60/0x90
> __x64_sys_ioctl+0x6f/0xb0
> do_syscall_64+0x136/0x440
> ? syscall_return_slowpath+0x2d0/0x2d0
> ? do_page_fault+0x89/0x330
> ? __do_page_fault+0x9c0/0x9c0
> ? prepare_exit_to_usermode+0x188/0x200
> ? perf_trace_sys_enter+0x1090/0x1090
> ? __x64_sys_sigaltstack+0x280/0x280
> ? __put_user_4+0x1c/0x30
> entry_SYSCALL_64_after_hwframe+0x44/0xa9
> RIP: 0033:0x7f16ff89a09b
> Code: 0f 1e fa 48 8b 05 ed bd 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d bd bd 0c 00 f7 d8 64 89 01 48
> RSP: 002b:00007fff001232b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
> RAX: ffffffffffffffda RBX: 00007fff001232f0 RCX: 00007f16ff89a09b
> RDX: 00007fff001232f0 RSI: 00000000c06864a2 RDI: 000000000000000b
> RBP: 00007fff001232f0 R08: 0000000000000000 R09: 000055a79d484460
> R10: 000055a79d44e770 R11: 0000000000000246 R12: 00000000c06864a2
> R13: 000000000000000b R14: 0000000000000000 R15: 000055a79d44e770
> WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153 drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
> ---[ end trace d536c05c13c83be2 ]---
> [drm:drm_dp_atomic_release_vcpi_slots [drm_kms_helper]] *ERROR* no VCPI for [MST PORT:00000000f9e2b143] found in mst state 000000009fd2899a
>
> This appears to be happening because we destroy the VCPI allocations
> when disabling all connected displays while suspending, and those VCPI
> allocations don't get restored on resume due to failing to restore the
> atomic state.
>
> So, fix this by introducing the suspending option to
> drm_atomic_helper_duplicate_state() and use that to indicate in the
> atomic state that it's being used for suspending or resuming the system,
> and thus needs to be fixed up by the driver. We can then use the new
> state->duplicated hook to tell update_connector_routing() in
> drm_atomic_check_modeset() to allow for modesets on unregistered
> connectors, which allows us to restore atomic states that contain MST
> topologies that were removed after the state was duplicated and thus:
> mostly fixing suspend and resume. This just leaves some issues that were
> introduced with nouveau, that will be addressed next.
>
> Changes since v3:
> * Remove ->duplicated hunks that I left in the VCPI helpers by accident.
> These don't need to be here, that was the supposed to be the purpose
> of the last revision
> Changes since v2:
> * Remove the changes in this patch to the VCPI helpers, they aren't
> needed anymore
> Changes since v1:
> * Rename suspend_or_resume to duplicated
>
> Signed-off-by: Lyude Paul <lyude at redhat.com>
> Fixes: eceae1472467 ("drm/dp_mst: Start tracking per-port VCPI allocations")
> Cc: Daniel Vetter <daniel at ffwll.ch>
> ---
> drivers/gpu/drm/drm_atomic_helper.c | 10 +++++++++-
> drivers/gpu/drm/drm_dp_mst_topology.c | 9 +++++++++
> include/drm/drm_atomic.h | 9 +++++++++
> 3 files changed, 27 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
> index 6fe2303fccd9..f578bf1fe164 100644
> --- a/drivers/gpu/drm/drm_atomic_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_helper.c
> @@ -332,8 +332,15 @@ update_connector_routing(struct drm_atomic_state *state,
> * about is ensuring that userspace can't do anything but shut off the
> * display on a connector that was destroyed after its been notified,
> * not before.
> + *
> + * Additionally, we also want to ignore connector registration when
> + * we're trying to restore an atomic state during system resume since
> + * there's a chance the connector may have been destroyed during the
> + * process, but it's better to ignore that then cause
> + * drm_atomic_helper_resume() to fail.
> */
> - if (drm_connector_is_unregistered(connector) && crtc_state->active) {
> + if (!state->duplicated && drm_connector_is_unregistered(connector) &&
> + crtc_state->active) {
This now is the only is_unregistered() check in the entire atomic ioctl
path I could find, makes sense that we only have to check for
state->duplicated here. Plus all the validated topology references are
gone too.
Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] is not registered\n",
> connector->base.id, connector->name);
> return -EINVAL;
> @@ -3180,6 +3187,7 @@ drm_atomic_helper_duplicate_state(struct drm_device *dev,
> return ERR_PTR(-ENOMEM);
>
> state->acquire_ctx = ctx;
> + state->duplicated = true;
>
> drm_for_each_crtc(crtc, dev) {
> struct drm_crtc_state *crtc_state;
> diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
> index 4325e1518286..61bba5bd1551 100644
> --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> @@ -3097,6 +3097,10 @@ static int drm_dp_init_vcpi(struct drm_dp_mst_topology_mgr *mgr,
> * @port as needed. It is not OK however, to call this function and
> * drm_dp_atomic_release_vcpi_slots() in the same atomic check phase.
> *
> + * When &drm_atomic_state.duplicated is set to %true%, this function will not
> + * perform any error checking and will instead simply return the previously
> + * recorded VCPI allocations.
> + *
> * See also:
> * drm_dp_atomic_release_vcpi_slots()
> * drm_dp_mst_atomic_check()
> @@ -3181,6 +3185,11 @@ EXPORT_SYMBOL(drm_dp_atomic_find_vcpi_slots);
> * drm_dp_atomic_find_vcpi_slots() on the same @port in a single atomic check
> * phase.
> *
> + * When &drm_atomic_state.duplicated is set, this function will not
> + * modify the VCPI allocations in &drm_dp_mst_topology_state.vcpis, so that
> + * those VCPI allocations may be restored as-is from the duplicated state. In
> + * this scenario, this function will always return 0.
> + *
> * See also:
> * drm_dp_atomic_find_vcpi_slots()
> * drm_dp_mst_atomic_check()
> diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h
> index 811b4a92568f..961c792fa98b 100644
> --- a/include/drm/drm_atomic.h
> +++ b/include/drm/drm_atomic.h
> @@ -329,6 +329,15 @@ struct drm_atomic_state {
> bool allow_modeset : 1;
> bool legacy_cursor_update : 1;
> bool async_update : 1;
> + /**
> + * @duplicated:
> + *
> + * Indicates whether or not this atomic state was duplicated using
> + * drm_atomic_helper_duplicate_state(). Drivers and atomic helpers
> + * should use this to fixup normal inconsistencies in duplicated
> + * states.
> + */
> + bool duplicated : 1;
> struct __drm_planes_state *planes;
> struct __drm_crtcs_state *crtcs;
> int num_connector;
> --
> 2.20.1
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the dri-devel
mailing list