[PATCH v2 0/9] drm/sun4i: dsi: Add burst mode support

[Maxime Ripard]

Hi,

Here is a series implementing the burst mode support for DSI.

It's been tested on an A33 board with the panel supported on the last
patch, which should remove all quirks due to a different SoC from the
equation.

Let me know what you think,
Maxime

Changes from v2:
  - Change the start delay calculation according to the legacy driver in
    Allwinner's BSP
  - Fixed the edge calculation to add the same parentheses around the
    factors
  - Added a bunch of fixes to timings
  - Added a patch to make hblk computation more accurate, and added a
    comment
  - Renamed the panel to Ronbo and fixed a bunch of things
  - Added the Reviewed-By

Konstantin Sudakov (2):
  drm/sun4i: dsi: Add burst support
  drm/panel: Add Ronbo RB070D30 panel

Maxime Ripard (7):
  fixup! ARM: dts: sun8i-a33: bridgemate: Enable display support
  drm/sun4i: dsi: Restrict DSI tcon clock divider
  drm/sun4i: dsi: Change the start delay calculation
  drm/sun4i: dsi: Enforce boundaries on the start delay
  drm/sun4i: dsi: Fix front vs back porch calculation
  drm/sun4i: dsi: Fix DRQ calculation
  drm/sun4i: dsi: Rework a bit the hblk calculation

 arch/arm/boot/dts/sun8i-a33-bridgemate-bm3.dts |   2 +-
 drivers/gpu/drm/panel/Kconfig                  |   9 +-
 drivers/gpu/drm/panel/Makefile                 |   1 +-
 drivers/gpu/drm/panel/panel-ronbo-rb070d30.c   | 262 ++++++++++++++++++-
 drivers/gpu/drm/sun4i/sun4i_tcon.c             |   4 +-
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c         | 183 ++++++++++---
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h         |   2 +-
 7 files changed, 420 insertions(+), 43 deletions(-)
 create mode 100644 drivers/gpu/drm/panel/panel-ronbo-rb070d30.c

base-commit: f6028e7e48b0f3865b0837d400ca783d3d200b62
-- 
git-series 0.9.1