[PATCH] drm/mediatek: add mt8183 dpi support

[Jitao Shi]

On Thu, 2019-02-14 at 15:41 -0500, Sean Paul wrote:
> On Mon, Feb 11, 2019 at 12:50:59PM +0800, Jitao Shi wrote:
> > MT8183 sample on rising and falling edge. It can reduce half data io.
> > 
> > Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_dpi.c | 29 +++++++++++++++++++++++++++++
> >  1 file changed, 29 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > index 62a9d47df948..610c23334047 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > @@ -117,6 +117,7 @@ struct mtk_dpi_conf {
> >  	unsigned int (*cal_factor)(int clock);
> >  	u32 reg_h_fre_con;
> >  	bool edge_sel_en;
> > +	bool dual_edge;
> >  };
> >  
> >  static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
> > @@ -353,6 +354,13 @@ static void mtk_dpi_config_disable_edge(struct mtk_dpi *dpi)
> >  		mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0, EDGE_SEL_EN);
> >  }
> >  
> > +static void mtk_dpi_enable_dual_edge(struct mtk_dpi *dpi)
> > +{
> > +	mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN | DDR_4PHASE,
> > +		     DDR_EN | DDR_4PHASE);
> > +	mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, EDGE_SEL, EDGE_SEL);
> > +}
> > +
> >  static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
> >  					enum mtk_dpi_out_color_format format)
> >  {
> > @@ -509,6 +517,8 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
> >  	mtk_dpi_config_color_format(dpi, dpi->color_format);
> >  	mtk_dpi_config_2n_h_fre(dpi);
> >  	mtk_dpi_config_disable_edge(dpi);
> > +	if (dpi->conf->dual_edge)
> > +		mtk_dpi_enable_dual_edge(dpi);
> >  	mtk_dpi_sw_reset(dpi, false);
> >  
> >  	return 0;
> > @@ -671,6 +681,16 @@ static unsigned int mt2701_calculate_factor(int clock)
> >  		return 2;
> >  }
> >  
> > +static unsigned int mt8183_calculate_factor(int clock)
> > +{
> > +	if (clock <= 27000)
> > +		return 8;
> > +	else if (clock <= 167000)
> > +		return 4;
> > +	else
> > +		return 2;
> > +}
> > +
> >  static const struct mtk_dpi_conf mt8173_conf = {
> >  	.cal_factor = mt8173_calculate_factor,
> >  	.reg_h_fre_con = 0xe0,
> > @@ -682,6 +702,12 @@ static const struct mtk_dpi_conf mt2701_conf = {
> >  	.edge_sel_en = true,
> >  };
> >  
> > +static const struct mtk_dpi_conf mt8183_conf = {
> > +	.cal_factor = mt8183_calculate_factor,
> > +	.reg_h_fre_con = 0xe0,
> > +	.dual_edge = true,
> > +};
> > +
> >  static int mtk_dpi_probe(struct platform_device *pdev)
> >  {
> >  	struct device *dev = &pdev->dev;
> > @@ -777,6 +803,9 @@ static const struct of_device_id mtk_dpi_of_ids[] = {
> >  	{ .compatible = "mediatek,mt8173-dpi",
> >  	  .data = &mt8173_conf,
> >  	},
> > +	{ .compatible = "mediatek,mt8183-dpi",
> 
> Do you need to add this compatible value to the dt binding? If you can do as CK
> suggested, maybe you don't need this at all (and mt8183 can use the mt8173
> compatible string in the dt).
> 
> Sean
> 

Yes, CK is right. 

I'll move it to mt8173.

> > +	  .data = &mt8183_conf,
> > +	},
> >  	{ },
> >  };
> >  
> > -- 
> > 2.12.5
> > 
>