[PATCH v3 06/11] drm/sun4i: rgb: Add DT property to disable strict clock rate check
Vasily Khoruzhick
anarsoul at gmail.com
Tue Feb 19 15:44:56 UTC 2019
On Tue, Feb 19, 2019 at 12:56 AM Maxime Ripard
<maxime.ripard at bootlin.com> wrote:
>
> On Mon, Feb 18, 2019 at 11:33:05AM -0800, Vasily Khoruzhick wrote:
> > On Mon, Feb 18, 2019 at 10:26 AM Rob Herring <robh at kernel.org> wrote:
> > >
> > > On Thu, Feb 14, 2019 at 09:09:52PM -0800, Vasily Khoruzhick wrote:
> > > > Clock rate check that was added in commit bb43d40d7c83 ("drm/sun4i: rgb:
> > > > Validate the clock rate") prevents some panel and bridges from working with
> > > > sun4i driver.
> > >
> > > Sounds lile a regression that should be reverted. The fix is not a
> > > backwards compatible change either.
> >
> > anx6345 driver isn't mainlined yet and I'm not sure if this change
> > breaks any mainlined boards. So likely there's not enough
> > justification to revert it.
> >
> > > > Unfortunately, dotclock frequency for some modes are not achievable on
> > > > sunxi hardware, and there's a slight deviation in rate returned by
> > > > clk_round_rate(), so they fail this check.
> > > >
> > > > Experiments show that panels and bridges work fine with this slight
> > > > deviation, e.g. Pinebook that uses ANX6345 bridge with 768p eDP panel
> > > > requests 73 MHz, gets 72.296MHz instead (0.96% difference) and works just
> > > > fine.
> > > >
> > > > This patch adds DT property to disable strict clock rate check
> > > >
> > > > Signed-off-by: Vasily Khoruzhick <anarsoul at gmail.com>
> > > > ---
> > > > .../devicetree/bindings/display/sunxi/sun4i-drm.txt | 2 ++
> > > > drivers/gpu/drm/sun4i/sun4i_rgb.c | 5 +++++
> > > > drivers/gpu/drm/sun4i/sun4i_tcon.c | 3 +++
> > > > drivers/gpu/drm/sun4i/sun4i_tcon.h | 1 +
> > > > 4 files changed, 11 insertions(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> > > > index f426bdb42f18..18c8b053a28d 100644
> > > > --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> > > > +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> > > > @@ -63,6 +63,8 @@ Required properties:
> > > > Documentation/devicetree/bindings/media/video-interfaces.txt. The
> > > > first port should be the input endpoint. The second should be the
> > > > output, usually to an HDMI connector.
> > > > + - no-strict-clock-check: don't reject timings if exact dot clock can't be
> > > > + reached.
> > >
> > > This should be the default IMO. Most panels are a single timing, so if
> > > we reject it the fallback no display?
> >
> > As far as I remember the change was introduced to reject some modes
> > for which dotclock can't be reached when driver is used with VGA
> > bridge. So if we make it default it'll break boards with VGA bridge
> > and old DT.
> >
> > > I thought we had some mechanism already to allow some range of
> > > frequencies. I think the chromeos guys needed something IIRC.
> >
> > You can specify frequency range for panels, but there's nothing for
> > bridges. In my case EDID doesn't specify clock tolerance.
>
> I gave it some more though, and came up with the following patch. The
> basic idea is to leave the boundary check for the bridges that will
> have EDID and we need to filter out the modes that have no chance of
> being supported. The tolerancy used is the one defined in VESA specs,
> but I added a module parameter if you wanted to tune that.
>
> And finally, since most of our panels are single timings without any
> tolerancy, we just try our best in this case and that's it, while
> leaving the door open to support display_timings and being able to do
> more once we have an idea of what the tolerancies are.
>
> If that works for you, I'll submit it.
Maxime, thanks for your patch but it doesn't work for me. Pinebook
needs 1% tolerance. Having it as a module parameter means that no
distro will be able to boot on Pinebook out of the box.
> Maxime
>
> --- >8 ---
> diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c
> index f4a22689eb54..0460146aab75 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_rgb.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c
> @@ -43,6 +43,25 @@ drm_encoder_to_sun4i_rgb(struct drm_encoder *encoder)
> encoder);
> }
>
> +static inline struct drm_connector *
> +sun4i_rgb_get_connector_from_encoder(const struct drm_encoder *encoder)
> +{
> + struct drm_connector *connector = NULL, *tmp;
> + struct drm_connector_list_iter iter;
> +
> + drm_connector_list_iter_begin(encoder->dev, &iter);
> + drm_for_each_connector_iter(tmp, &iter)
> + if (tmp->encoder == encoder) {
> + connector = tmp;
> + goto out;
> + }
> +
> +out:
> + drm_connector_list_iter_end(&iter);
> +
> + return connector;
> +}
> +
> static int sun4i_rgb_get_modes(struct drm_connector *connector)
> {
> struct sun4i_rgb *rgb =
> @@ -52,11 +71,22 @@ static int sun4i_rgb_get_modes(struct drm_connector *connector)
> return drm_panel_get_modes(tcon->panel);
> }
>
> +/*
> + * VESA DMT defines a tolerancy of 0.5% on the pixel clock, while the
> + * CVT spec reuses that tolerancy in its examples, so it looks to be a
> + * good default tolerancy for the EDID-based modes.
> + */
> +static unsigned int clock_tolerancy = 5;
> +module_param(clock_tolerancy, uint, 0644);
> +MODULE_PARM_DESC(clock_tolerancy,
> + "Tolerancy of the pixel clock in per mille");
> +
> static enum drm_mode_status sun4i_rgb_mode_valid(struct drm_encoder *crtc,
> const struct drm_display_mode *mode)
> {
> struct sun4i_rgb *rgb = drm_encoder_to_sun4i_rgb(crtc);
> struct sun4i_tcon *tcon = rgb->tcon;
> + struct drm_connector *connector = sun4i_rgb_get_connector_from_encoder(crtc);
> u32 hsync = mode->hsync_end - mode->hsync_start;
> u32 vsync = mode->vsync_end - mode->vsync_start;
> unsigned long rate = mode->clock * 1000;
> @@ -92,15 +122,27 @@ static enum drm_mode_status sun4i_rgb_mode_valid(struct drm_encoder *crtc,
>
> DRM_DEBUG_DRIVER("Vertical parameters OK\n");
>
> + /*
> + * TODO: We should use the struct display_timing if available
> + * and / or trying to stretch the timings within that
> + * tolerancy to take care of panels that we wouldn't be able
> + * to have a exact match for.
> + */
> + if (connector->connector_type == DRM_MODE_CONNECTOR_Unknown) {
> + DRM_DEBUG_DRIVER("RGB panel used, skipping clock rate checks");
> + goto out;
> + }
> +
> tcon->dclk_min_div = 6;
> tcon->dclk_max_div = 127;
> rounded_rate = clk_round_rate(tcon->dclk, rate);
> - if (rounded_rate < rate)
> + if (rounded_rate < (rate * (1000 - clock_tolerancy) / 1000))
> return MODE_CLOCK_LOW;
>
> - if (rounded_rate > rate)
> + if (rounded_rate > (rate * (1000 + clock_tolerancy) / 1000))
> return MODE_CLOCK_HIGH;
>
> +out:
> DRM_DEBUG_DRIVER("Clock rate OK\n");
>
> return MODE_OK;
> --- >8 ---
>
>
> --
> Maxime Ripard, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
More information about the dri-devel
mailing list