[PATCH 0/4] drm/sun4i: dsi: Add burst mode support

[Maxime Ripard]

Hi,

Here is a series implementing the burst mode support for DSI.

It's been tested on an A33 board with the panel supported on the 4th patch,
which should remove all quirks due to a different SoC from the equation.

Let me know what you think,
Maxime

Konstantin Sudakov (2):
  drm/sun4i: dsi: Add burst support
  drm/panel: Add Rondo RB070D30 panel

Maxime Ripard (2):
  drm/sun4i: dsi: Restrict DSI tcon clock divider
  drm/sun4i: dsi: Change the start delay calculation

 drivers/gpu/drm/panel/Kconfig                |   9 +-
 drivers/gpu/drm/panel/Makefile               |   1 +-
 drivers/gpu/drm/panel/panel-rondo-rb070d30.c | 258 ++++++++++++++++++++-
 drivers/gpu/drm/sun4i/sun4i_tcon.c           |   4 +-
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c       | 185 ++++++++++----
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h       |   2 +-
 6 files changed, 414 insertions(+), 45 deletions(-)
 create mode 100644 drivers/gpu/drm/panel/panel-rondo-rb070d30.c

base-commit: f6028e7e48b0f3865b0837d400ca783d3d200b62
-- 
git-series 0.9.1