[PATCH] drm/bridge: sil_sii8620: depend on INPUT instead of selecting it.

Life is hard, and then you die ronald at innovation.ch
Thu Jan 24 07:21:25 UTC 2019


On Thu, Jan 24, 2019 at 12:22:00AM +0200, Laurent Pinchart wrote:
> 
> On Wed, Jan 23, 2019 at 02:21:05PM -0800, Dmitry Torokhov wrote:
> > On Thu, Jan 24, 2019 at 12:17:35AM +0200, Laurent Pinchart wrote:
> > > On Wed, Jan 23, 2019 at 02:03:42PM -0800, Dmitry Torokhov wrote:
> > >> On Wed, Jan 23, 2019 at 09:45:56AM +0100, Lukas Wunner wrote:
> > >>> On Tue, Jan 22, 2019 at 06:13:11AM -0800, Ronald Tschalär wrote:
> > >>>> commit d6abe6df706c66d803e6dd4fe98c1b6b7f125a56 (drm/bridge:
> > >>>> sil_sii8620: do not have a dependency of RC_CORE) added a dependency on
> > >>>> INPUT. However, this causes problems with other drivers, in particular
> > >>>> an input driver that depends on MFD_INTEL_LPSS_PCI (to be added in a
> > >>>> future commit):
> > >>>> 
> > >>>>   drivers/clk/Kconfig:9:error: recursive dependency detected!
> > >>>>   drivers/clk/Kconfig:9:        symbol COMMON_CLK is selected by MFD_INTEL_LPSS
> > >>>>   drivers/mfd/Kconfig:566:      symbol MFD_INTEL_LPSS is selected by MFD_INTEL_LPSS_PCI
> > >>>>   drivers/mfd/Kconfig:580:      symbol MFD_INTEL_LPSS_PCI is implied by KEYBOARD_APPLESPI
> > >>>>   drivers/input/keyboard/Kconfig:73:    symbol KEYBOARD_APPLESPI depends on INPUT
> > >>>>   drivers/input/Kconfig:8:      symbol INPUT is selected by DRM_SIL_SII8620
> > >>>>   drivers/gpu/drm/bridge/Kconfig:83:    symbol DRM_SIL_SII8620 depends on DRM_BRIDGE
> > >>>>   drivers/gpu/drm/bridge/Kconfig:1:     symbol DRM_BRIDGE is selected by DRM_PL111
> > >>>>   drivers/gpu/drm/pl111/Kconfig:1:      symbol DRM_PL111 depends on COMMON_CLK
> > >>>> 
> > >>>> According to the docs, select should only be used for non-visible
> > >>>> symbols. Furthermore almost all other references to INPUT throughout the
> > >>>> kernel config are depends, not selects. Hence this change.
> > >> 
> > >> I think this is not as cut and dry. We should be able to select needed
> > >> subsystems (such as INPUT, USB, etc) even if they are user visible.
> > > 
> > > Semantically, maybe, but given the current state of Kconfig this results
> > > in a recursive dependencies nightmare. It's a no-go.
> > > 
> > >> User, when enabling a piece of hardware, does not need to know ultimate
> > >> details of all subsystems the driver might need ti function.
> > >> 
> > >> It looks like one of the drivers implies MFD_INTEL_LPSS_PCI, maybe
> > >> treating imply the same as select when detecting circular dependency is
> > >> wrong as we are allowed to deselect implied dependencies?
> > >> 
> > >>>> 
> > >>>> CC: Inki Dae <inki.dae at samsung.com>
> > >>>> CC: Andrzej Hajda <a.hajda at samsung.com>
> > >>>> Signed-off-by: Ronald Tschalär <ronald at innovation.ch>
> > >>> 
> > >>> Reviewed-by: Lukas Wunner <lukas at wunner.de>
> > >>> 
> > >>> I think this needs to be merged through the input tree as a prerequisite
> > >>> for the applespi.c driver (keyboard + touchpad driver for 2015+ MacBook,
> > >>> MacBook Air and MacBook Pro which uses SPI instead of USB) to avoid
> > >>> breaking the build.  Adding Dmitry.
> > >> 
> > >> I have no idea what applespi.c is (it is definitely not in my tree), so
> > >> I think it should be merged through the same tree that the original
> > >> commit was introduced through.

Apologies, I should've added a cover letter explain this: the applespi
driver is a new input driver I'm about to submit through the input
tree, hence why you wouldn't have it. But as Lukas says, the change
here is a prerequisite for the proposed Kconfig for that driver.

Since the two changes (the change here + the new driver) seem to be
best submitted through different trees, I'm trying to figure out how
best to handle this. I suppose I could temporarily change the driver
Kconfig to not trigger the conflict, and then once the change here has
been upstreamed (not sure at what point exactly that would be
considered the case, e.g. if in linux-next is sufficient, or has to
wait for Linus' merge, or something else) submit another change to
change the driver's Kconfig to the desired one.

> > >>>> ---
> > >>>>  drivers/gpu/drm/bridge/Kconfig | 2 +-
> > >>>>  1 file changed, 1 insertion(+), 1 deletion(-)
> > >>>> 
> > >>>> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> > >>>> index 2fee47b0d50b..eabedc83f25c 100644
> > >>>> --- a/drivers/gpu/drm/bridge/Kconfig
> > >>>> +++ b/drivers/gpu/drm/bridge/Kconfig
> > >>>> @@ -83,9 +83,9 @@ config DRM_PARADE_PS8622
> > >>>>  config DRM_SIL_SII8620
> > >>>>  	tristate "Silicon Image SII8620 HDMI/MHL bridge"
> > >>>>  	depends on OF
> > >>>> +	depends on INPUT
> > >>>>  	select DRM_KMS_HELPER
> > >>>>  	imply EXTCON
> > >>>> -	select INPUT
> > >>>>  	select RC_CORE
> > >> 
> > >> Keeping "select RC_CORE" is wrong though, as the driver appears to be
> > >> working find without RC. Maybe it should be stubbed out?
> > > 
> > > It should definitely not be select'ed as it's a user-visible symbol. My
> > > preference would be to simply revert d6abe6df706c. If we want (and can)
> > > work without RC core then it should be stubbed out.
> > > 
> > > Commit d6abe6df706c states
> > > 
> > >     And some boards not using remote controller device don't really
> > >     need to know that RC_CORE config should be enabled to use sil_sii8620
> > >     driver only for HDMI.
> > > 
> > > The same reasoning applies to INPUT, if we agree that depending on
> > > RC_CORE is confusing for users, then depending on INPUT is confusing as
> > > well. There's not reason to apply different standards to INPUT and
> > > RC_CORE, depending on one and selecting the other doesn't make much
> > > sense.
> > 
> > OK, so revert + patch to stub out RC calls? That works for me (and I
> > still say it should go through the same tree that introduced
> > d6abe6df706c).
> 
> Yes, that sounds good to me.

Thanks for the reviews. Ok, I'll submit a new patch shortly for this.
However, other than compiling with RC_CORE and INPUT set/unset I can't
test the changes to the sil-sii8620 driver.


  Cheers,

  Ronald



More information about the dri-devel mailing list