[PATCH v4 8/9] gpu/drm/i915: optimize out the case when a range is updated to read only
Jerome Glisse
jglisse at redhat.com
Thu Jan 24 15:30:32 UTC 2019
On Thu, Jan 24, 2019 at 02:09:12PM +0200, Joonas Lahtinen wrote:
> Hi Jerome,
>
> This patch seems to have plenty of Cc:s, but none of the right ones :)
So sorry, i am bad with git commands.
> For further iterations, I guess you could use git option --cc to make
> sure everyone gets the whole series, and still keep the Cc:s in the
> patches themselves relevant to subsystems.
Will do.
> This doesn't seem to be on top of drm-tip, but on top of your previous
> patches(?) that I had some comments about. Could you take a moment to
> first address the couple of question I had, before proceeding to discuss
> what is built on top of that base.
It is on top of Linus tree so roughly ~ rc3 it does not depend on any
of the previous patch i posted. I still intended to propose to remove
GUP from i915 once i get around to implement the equivalent of GUP_fast
for HMM and other bonus cookies with it.
The plan is once i have all mm bits properly upstream then i can propose
patches to individual driver against the proper driver tree ie following
rules of each individual device driver sub-system and Cc only people
there to avoid spamming the mm folks :)
>
> My reply's Message-ID is:
> 154289518994.19402.3481838548028068213 at jlahtine-desk.ger.corp.intel.com
>
> Regards, Joonas
>
> PS. Please keep me Cc:d in the following patches, I'm keen on
> understanding the motive and benefits.
>
> Quoting jglisse at redhat.com (2019-01-24 00:23:14)
> > From: Jérôme Glisse <jglisse at redhat.com>
> >
> > When range of virtual address is updated read only and corresponding
> > user ptr object are already read only it is pointless to do anything.
> > Optimize this case out.
> >
> > Signed-off-by: Jérôme Glisse <jglisse at redhat.com>
> > Cc: Christian König <christian.koenig at amd.com>
> > Cc: Jan Kara <jack at suse.cz>
> > Cc: Felix Kuehling <Felix.Kuehling at amd.com>
> > Cc: Jason Gunthorpe <jgg at mellanox.com>
> > Cc: Andrew Morton <akpm at linux-foundation.org>
> > Cc: Matthew Wilcox <mawilcox at microsoft.com>
> > Cc: Ross Zwisler <zwisler at kernel.org>
> > Cc: Dan Williams <dan.j.williams at intel.com>
> > Cc: Paolo Bonzini <pbonzini at redhat.com>
> > Cc: Radim Krčmář <rkrcmar at redhat.com>
> > Cc: Michal Hocko <mhocko at kernel.org>
> > Cc: Ralph Campbell <rcampbell at nvidia.com>
> > Cc: John Hubbard <jhubbard at nvidia.com>
> > Cc: kvm at vger.kernel.org
> > Cc: dri-devel at lists.freedesktop.org
> > Cc: linux-rdma at vger.kernel.org
> > Cc: linux-fsdevel at vger.kernel.org
> > Cc: Arnd Bergmann <arnd at arndb.de>
> > ---
> > drivers/gpu/drm/i915/i915_gem_userptr.c | 16 ++++++++++++++++
> > 1 file changed, 16 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_gem_userptr.c b/drivers/gpu/drm/i915/i915_gem_userptr.c
> > index 9558582c105e..23330ac3d7ea 100644
> > --- a/drivers/gpu/drm/i915/i915_gem_userptr.c
> > +++ b/drivers/gpu/drm/i915/i915_gem_userptr.c
> > @@ -59,6 +59,7 @@ struct i915_mmu_object {
> > struct interval_tree_node it;
> > struct list_head link;
> > struct work_struct work;
> > + bool read_only;
> > bool attached;
> > };
> >
> > @@ -119,6 +120,7 @@ static int i915_gem_userptr_mn_invalidate_range_start(struct mmu_notifier *_mn,
> > container_of(_mn, struct i915_mmu_notifier, mn);
> > struct i915_mmu_object *mo;
> > struct interval_tree_node *it;
> > + bool update_to_read_only;
> > LIST_HEAD(cancelled);
> > unsigned long end;
> >
> > @@ -128,6 +130,8 @@ static int i915_gem_userptr_mn_invalidate_range_start(struct mmu_notifier *_mn,
> > /* interval ranges are inclusive, but invalidate range is exclusive */
> > end = range->end - 1;
> >
> > + update_to_read_only = mmu_notifier_range_update_to_read_only(range);
> > +
> > spin_lock(&mn->lock);
> > it = interval_tree_iter_first(&mn->objects, range->start, end);
> > while (it) {
> > @@ -145,6 +149,17 @@ static int i915_gem_userptr_mn_invalidate_range_start(struct mmu_notifier *_mn,
> > * object if it is not in the process of being destroyed.
> > */
> > mo = container_of(it, struct i915_mmu_object, it);
> > +
> > + /*
> > + * If it is already read only and we are updating to
> > + * read only then we do not need to change anything.
> > + * So save time and skip this one.
> > + */
> > + if (update_to_read_only && mo->read_only) {
> > + it = interval_tree_iter_next(it, range->start, end);
> > + continue;
> > + }
> > +
> > if (kref_get_unless_zero(&mo->obj->base.refcount))
> > queue_work(mn->wq, &mo->work);
> >
> > @@ -270,6 +285,7 @@ i915_gem_userptr_init__mmu_notifier(struct drm_i915_gem_object *obj,
> > mo->mn = mn;
> > mo->obj = obj;
> > mo->it.start = obj->userptr.ptr;
> > + mo->read_only = i915_gem_object_is_readonly(obj);
> > mo->it.last = obj->userptr.ptr + obj->base.size - 1;
> > INIT_WORK(&mo->work, cancel_userptr);
> >
> > --
> > 2.17.2
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
More information about the dri-devel
mailing list