[PATCH v6 2/2] drm/panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel
Jagan Teki
jagan at amarulasolutions.com
Mon Jan 28 18:54:28 UTC 2019
Feiyang FY07024DI26A30-D is 1024x600, 4-lane MIPI-DSI LCD panel.
Add panel driver for it.
Reviewed-by: Sam Ravnborg <sam at ravnborg.org>
Tested-by: Bhushan Shah <bshah at kde.org>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v6:
- add space b/w msleep and comment line
- use multi comment line style
- add sentinel
- collect Sam Ravnborg Reviewed-by
Changes for v5:
- drop drmP.h header
- order include files
- add empty line after kzalloc()
- drop gpio set for reset
- drop backlight put_device from probe()
- drop backlight put_device from remove()
- collect Tested-by from Bhushan Shah
Changes for v4:
- rebase on master
- adjust the hporch values to satisfy the refresh
Changes for v3:
- use simple structure for command init
- update proper comments on power, reset delay sequnce
- fix to use set_display_off in disable function
- move mode type to structure
- drop refres rate value, let drm compute
Changes for v2:
- new patch, derived from another dsi series
MAINTAINERS | 6 +
drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
.../drm/panel/panel-feiyang-fy07024di26a30d.c | 271 ++++++++++++++++++
4 files changed, 287 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
diff --git a/MAINTAINERS b/MAINTAINERS
index e3f785bad68b..5c8591eb5840 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4831,6 +4831,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc
S: Maintained
F: drivers/gpu/drm/tve200/
+DRM DRIVER FOR FEIYANG FY07024DI26A30-D MIPI-DSI LCD PANELS
+M: Jagan Teki <jagan at amarulasolutions.com>
+S: Maintained
+F: drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
+F: Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
+
DRM DRIVER FOR ILITEK ILI9225 PANELS
M: David Lechner <david at lechnology.com>
S: Maintained
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 151ddf720b83..5304db7b7b55 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -47,6 +47,15 @@ config DRM_PANEL_SIMPLE
that it can be automatically turned off when the panel goes into a
low power state.
+config DRM_PANEL_FEIYANG_FY07024DI26A30D
+ tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y if you want to enable support for panels based on the
+ Feiyang FY07024DI26A30-D MIPI-DSI interface.
+
config DRM_PANEL_ILITEK_IL9322
tristate "Ilitek ILI9322 320x240 QVGA panels"
depends on OF && SPI
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 54db0921f329..c88dacf9d439 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o
obj-$(CONFIG_DRM_PANEL_BANANAPI_S070WV20_ICN6211) += panel-bananapi-s070wv20-icn6211.o
obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
+obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o
obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
diff --git a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
new file mode 100644
index 000000000000..4ecf408d6492
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Amarula Solutions
+ * Author: Jagan Teki <jagan at amarulasolutions.com>
+ */
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+
+#include <linux/backlight.h>
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#define FEIYANG_INIT_CMD_LEN 2
+
+struct feiyang {
+ struct drm_panel panel;
+ struct mipi_dsi_device *dsi;
+
+ struct backlight_device *backlight;
+ struct regulator *dvdd;
+ struct regulator *avdd;
+ struct gpio_desc *reset;
+};
+
+static inline struct feiyang *panel_to_feiyang(struct drm_panel *panel)
+{
+ return container_of(panel, struct feiyang, panel);
+}
+
+struct feiyang_init_cmd {
+ u8 data[FEIYANG_INIT_CMD_LEN];
+};
+
+static const struct feiyang_init_cmd feiyang_init_cmds[] = {
+ { .data = { 0x80, 0x58 } },
+ { .data = { 0x81, 0x47 } },
+ { .data = { 0x82, 0xD4 } },
+ { .data = { 0x83, 0x88 } },
+ { .data = { 0x84, 0xA9 } },
+ { .data = { 0x85, 0xC3 } },
+ { .data = { 0x86, 0x82 } },
+};
+
+static int feiyang_prepare(struct drm_panel *panel)
+{
+ struct feiyang *ctx = panel_to_feiyang(panel);
+ struct mipi_dsi_device *dsi = ctx->dsi;
+ unsigned int i;
+ int ret;
+
+ ret = regulator_enable(ctx->dvdd);
+ if (ret)
+ return ret;
+
+ /* T1 (dvdd start + dvdd rise) 0 < T1 <= 10ms */
+ msleep(10);
+
+ ret = regulator_enable(ctx->avdd);
+ if (ret)
+ return ret;
+
+ /* T3 (dvdd rise + avdd start + avdd rise) T3 >= 20ms */
+ msleep(20);
+
+ gpiod_set_value(ctx->reset, 0);
+
+ /*
+ * T5 + T6 (avdd rise + video & logic signal rise)
+ * T5 >= 10ms, 0 < T6 <= 10ms
+ */
+ msleep(20);
+
+ gpiod_set_value(ctx->reset, 1);
+
+ /* T12 (video & logic signal rise + backlight rise) T12 >= 200ms */
+ msleep(200);
+
+ for (i = 0; i < ARRAY_SIZE(feiyang_init_cmds); i++) {
+ const struct feiyang_init_cmd *cmd =
+ &feiyang_init_cmds[i];
+
+ ret = mipi_dsi_dcs_write_buffer(dsi, cmd->data,
+ FEIYANG_INIT_CMD_LEN);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int feiyang_enable(struct drm_panel *panel)
+{
+ struct feiyang *ctx = panel_to_feiyang(panel);
+
+ /* T12 (video & logic signal rise + backlight rise) T12 >= 200ms */
+ msleep(200);
+
+ mipi_dsi_dcs_set_display_on(ctx->dsi);
+ backlight_enable(ctx->backlight);
+
+ return 0;
+}
+
+static int feiyang_disable(struct drm_panel *panel)
+{
+ struct feiyang *ctx = panel_to_feiyang(panel);
+
+ backlight_disable(ctx->backlight);
+ return mipi_dsi_dcs_set_display_off(ctx->dsi);
+}
+
+static int feiyang_unprepare(struct drm_panel *panel)
+{
+ struct feiyang *ctx = panel_to_feiyang(panel);
+ int ret;
+
+ ret = mipi_dsi_dcs_set_display_off(ctx->dsi);
+ if (ret < 0)
+ DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n",
+ ret);
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(ctx->dsi);
+ if (ret < 0)
+ DRM_DEV_ERROR(panel->dev, "failed to enter sleep mode: %d\n",
+ ret);
+
+ /* T13 (backlight fall + video & logic signal fall) T13 >= 200ms */
+ msleep(200);
+
+ gpiod_set_value(ctx->reset, 0);
+
+ regulator_disable(ctx->avdd);
+
+ /* T11 (dvdd rise to fall) 0 < T11 <= 10ms */
+ msleep(10);
+
+ regulator_disable(ctx->dvdd);
+
+ return 0;
+}
+
+static const struct drm_display_mode feiyang_default_mode = {
+ .clock = 55000,
+
+ .hdisplay = 1024,
+ .hsync_start = 1024 + 310,
+ .hsync_end = 1024 + 310 + 20,
+ .htotal = 1024 + 310 + 20 + 90,
+
+ .vdisplay = 600,
+ .vsync_start = 600 + 12,
+ .vsync_end = 600 + 12 + 2,
+ .vtotal = 600 + 12 + 2 + 21,
+
+ .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static int feiyang_get_modes(struct drm_panel *panel)
+{
+ struct drm_connector *connector = panel->connector;
+ struct feiyang *ctx = panel_to_feiyang(panel);
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(panel->drm, &feiyang_default_mode);
+ if (!mode) {
+ DRM_DEV_ERROR(&ctx->dsi->dev, "failed to add mode %ux%ux@%u\n",
+ feiyang_default_mode.hdisplay,
+ feiyang_default_mode.vdisplay,
+ feiyang_default_mode.vrefresh);
+ return -ENOMEM;
+ }
+
+ drm_mode_set_name(mode);
+
+ drm_mode_probed_add(connector, mode);
+
+ return 1;
+}
+
+static const struct drm_panel_funcs feiyang_funcs = {
+ .disable = feiyang_disable,
+ .unprepare = feiyang_unprepare,
+ .prepare = feiyang_prepare,
+ .enable = feiyang_enable,
+ .get_modes = feiyang_get_modes,
+};
+
+static int feiyang_dsi_probe(struct mipi_dsi_device *dsi)
+{
+ struct feiyang *ctx;
+ int ret;
+
+ ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ mipi_dsi_set_drvdata(dsi, ctx);
+ ctx->dsi = dsi;
+
+ drm_panel_init(&ctx->panel);
+ ctx->panel.dev = &dsi->dev;
+ ctx->panel.funcs = &feiyang_funcs;
+
+ ctx->dvdd = devm_regulator_get(&dsi->dev, "dvdd");
+ if (IS_ERR(ctx->dvdd)) {
+ DRM_DEV_ERROR(&dsi->dev, "Couldn't get dvdd regulator\n");
+ return PTR_ERR(ctx->dvdd);
+ }
+
+ ctx->avdd = devm_regulator_get(&dsi->dev, "avdd");
+ if (IS_ERR(ctx->avdd)) {
+ DRM_DEV_ERROR(&dsi->dev, "Couldn't get avdd regulator\n");
+ return PTR_ERR(ctx->avdd);
+ }
+
+ ctx->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->reset)) {
+ DRM_DEV_ERROR(&dsi->dev, "Couldn't get our reset GPIO\n");
+ return PTR_ERR(ctx->reset);
+ }
+
+ ctx->backlight = devm_of_find_backlight(&dsi->dev);
+ if (IS_ERR(ctx->backlight))
+ return PTR_ERR(ctx->backlight);
+
+ ret = drm_panel_add(&ctx->panel);
+ if (ret < 0)
+ return ret;
+
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->lanes = 4;
+
+ return mipi_dsi_attach(dsi);
+}
+
+static int feiyang_dsi_remove(struct mipi_dsi_device *dsi)
+{
+ struct feiyang *ctx = mipi_dsi_get_drvdata(dsi);
+
+ mipi_dsi_detach(dsi);
+ drm_panel_remove(&ctx->panel);
+
+ return 0;
+}
+
+static const struct of_device_id feiyang_of_match[] = {
+ { .compatible = "feiyang,fy07024di26a30d", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, feiyang_of_match);
+
+static struct mipi_dsi_driver feiyang_driver = {
+ .probe = feiyang_dsi_probe,
+ .remove = feiyang_dsi_remove,
+ .driver = {
+ .name = "feiyang-fy07024di26a30d",
+ .of_match_table = feiyang_of_match,
+ },
+};
+module_mipi_dsi_driver(feiyang_driver);
+
+MODULE_AUTHOR("Jagan Teki <jagan at amarulasolutions.com>");
+MODULE_DESCRIPTION("Feiyang FY07024DI26A30-D MIPI-DSI LCD panel");
+MODULE_LICENSE("GPL");
--
2.18.0.321.gffc6fa0e3
More information about the dri-devel
mailing list