[v9 3/3] drm/i915: Attach colorspace property and enable modeset

Maarten Lankhorst maarten.lankhorst at linux.intel.com
Wed Jan 30 09:57:24 UTC 2019


Op 29-01-2019 om 19:50 schreef Uma Shankar:
> This patch attaches the colorspace connector property to the
> hdmi connector. Based on colorspace change, modeset will be
> triggered to switch to new colorspace.
>
> Based on colorspace property value create an infoframe
> with appropriate colorspace. This can be used to send an
> infoframe packet with proper colorspace value set which
> will help to enable wider color gamut like BT2020 on sink.
>
> This patch attaches and enables HDMI colorspace, DP will be
> taken care separately.
>
> v2: Merged the changes of creating infoframe as well to this
> patch as per Maarten's suggestion.
>
> v3: Addressed review comments from Shashank. Separated HDMI
> and DP colorspaces as suggested by Ville and Maarten.
>
> v4: Addressed Chris and Ville's review comments, and created a
> common colorspace property for DP and HDMI, filtered the list
> based on the colorspaces supported by the respective protocol
> standard. Handle the default case properly.
>
> v5: Merged the DP handling along with platform colorspace
> handling as per Shashank's comments.
>
> v6: Addressed Maarten's review comment and limited this currently
> to non lspcon based devices.
>
> v7: Reverted to old design of exposing all colorspaces to
> userspace as per Ville's review comment
>
> Signed-off-by: Uma Shankar <uma.shankar at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_atomic.c    |  1 +
>  drivers/gpu/drm/i915/intel_connector.c |  8 ++++++++
>  drivers/gpu/drm/i915/intel_drv.h       |  1 +
>  drivers/gpu/drm/i915/intel_hdmi.c      | 25 +++++++++++++++++++++++++
>  4 files changed, 35 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
> index 16263ad..76b7114 100644
> --- a/drivers/gpu/drm/i915/intel_atomic.c
> +++ b/drivers/gpu/drm/i915/intel_atomic.c
> @@ -124,6 +124,7 @@ int intel_digital_connector_atomic_check(struct drm_connector *conn,
>  	 */
>  	if (new_conn_state->force_audio != old_conn_state->force_audio ||
>  	    new_conn_state->broadcast_rgb != old_conn_state->broadcast_rgb ||
> +	    new_state->colorspace != old_state->colorspace ||

I only care if there's a new version, but can you use xxx_conn_state->base ?

Can fixup if patch is ready otherwise.


Otherwise series looks good, so

Reviewed-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com> for the whole series. :)

>  	    new_conn_state->base.picture_aspect_ratio != old_conn_state->base.picture_aspect_ratio ||
>  	    new_conn_state->base.content_type != old_conn_state->base.content_type ||
>  	    new_conn_state->base.scaling_mode != old_conn_state->base.scaling_mode)
> diff --git a/drivers/gpu/drm/i915/intel_connector.c b/drivers/gpu/drm/i915/intel_connector.c
> index ee16758..ac2aed7 100644
> --- a/drivers/gpu/drm/i915/intel_connector.c
> +++ b/drivers/gpu/drm/i915/intel_connector.c
> @@ -265,3 +265,11 @@ int intel_ddc_get_modes(struct drm_connector *connector,
>  			connector->dev->mode_config.aspect_ratio_property,
>  			DRM_MODE_PICTURE_ASPECT_NONE);
>  }
> +
> +void
> +intel_attach_colorspace_property(struct drm_connector *connector)
> +{
> +	if (!drm_mode_create_colorspace_property(connector))
> +		drm_object_attach_property(&connector->base,
> +		connector->colorspace_property, 0);
> +}
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 85b913e..5178a9a 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1783,6 +1783,7 @@ int intel_connector_update_modes(struct drm_connector *connector,
>  void intel_attach_force_audio_property(struct drm_connector *connector);
>  void intel_attach_broadcast_rgb_property(struct drm_connector *connector);
>  void intel_attach_aspect_ratio_property(struct drm_connector *connector);
> +void intel_attach_colorspace_property(struct drm_connector *connector);
>  
>  /* intel_csr.c */
>  void intel_csr_ucode_init(struct drm_i915_private *);
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index 97a98e1..5c5009d 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -498,6 +498,24 @@ static void intel_hdmi_set_avi_infoframe(struct intel_encoder *encoder,
>  	else
>  		frame.avi.colorspace = HDMI_COLORSPACE_RGB;
>  
> +	if (conn_state->colorspace == DRM_MODE_COLORIMETRY_DEFAULT) {
> +		/* Set ITU 709 as default for HDMI */
> +		frame.avi.colorimetry = DRM_MODE_COLORIMETRY_ITU_709;
> +	} else if (conn_state->colorspace < DRM_MODE_COLORIMETRY_XV_YCC_601) {
> +		frame.avi.colorimetry = conn_state->colorspace;
> +	} else {
> +		frame.avi.colorimetry = HDMI_COLORIMETRY_EXTENDED;
> +		/*
> +		 * Starting from extended list where COLORIMETRY_XV_YCC_601
> +		 * is the first extended mode and its value is 0 as per HDMI
> +		 * specification.
> +		 * TODO: This needs to be extended for LSPCON implementation
> +		 * as well. Will be implemented separately.
> +		 */
> +		frame.avi.extended_colorimetry = conn_state->colorspace -
> +			DRM_MODE_COLORIMETRY_XV_YCC_601;
> +	}
> +
>  	drm_hdmi_avi_infoframe_quant_range(&frame.avi,
>  					   conn_state->connector,
>  					   adjusted_mode,
> @@ -2143,10 +2161,17 @@ static void intel_hdmi_destroy(struct drm_connector *connector)
>  intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *connector)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(connector->dev);
> +	struct intel_digital_port *intel_dig_port =
> +				hdmi_to_dig_port(intel_hdmi);
>  
>  	intel_attach_force_audio_property(connector);
>  	intel_attach_broadcast_rgb_property(connector);
>  	intel_attach_aspect_ratio_property(connector);
> +
> +	/* Attach Colorspace property for Non LSPCON based device */
> +	if (!intel_dig_port->lspcon.active)
> +		intel_attach_colorspace_property(connector);
> +
>  	drm_connector_attach_content_type_property(connector);
>  	connector->state->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE;
>  




More information about the dri-devel mailing list