[PATCH v1 08/19] drm/panel: innolux: use DRM_DEV*

[Sam Ravnborg]

Introduce use of DRM_DEV* for logging.
This makes logging in the drm subsystem more consistent.

Signed-off-by: Sam Ravnborg <sam at ravnborg.org>
Cc: Thierry Reding <thierry.reding at gmail.com>
Cc: David Airlie <airlied at linux.ie>
Cc: Daniel Vetter <daniel at ffwll.ch>
---
 drivers/gpu/drm/panel/panel-innolux-p079zca.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-innolux-p079zca.c b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
index c8d0da3116dd..cf18594d1954 100644
--- a/drivers/gpu/drm/panel/panel-innolux-p079zca.c
+++ b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
@@ -154,8 +154,9 @@ static int innolux_panel_prepare(struct drm_panel *panel)
 			err = mipi_dsi_generic_write(innolux->link, cmd->data,
 						     cmd->len);
 			if (err < 0) {
-				dev_err(panel->dev,
-					"failed to write command %u\n", i);
+				DRM_DEV_ERROR(panel->dev,
+					      "failed to write command %u\n",
+					      i);
 				goto poweroff;
 			}
 
@@ -166,8 +167,9 @@ static int innolux_panel_prepare(struct drm_panel *panel)
 			 */
 			err = mipi_dsi_dcs_nop(innolux->link);
 			if (err < 0) {
-				dev_err(panel->dev,
-					"failed to send DCS nop: %d\n", err);
+				DRM_DEV_ERROR(panel->dev,
+					      "failed to send DCS nop: %d\n",
+					      err);
 				goto poweroff;
 			}
 		}
@@ -482,7 +484,7 @@ static int innolux_panel_add(struct mipi_dsi_device *dsi,
 						       GPIOD_OUT_HIGH);
 	if (IS_ERR(innolux->enable_gpio)) {
 		err = PTR_ERR(innolux->enable_gpio);
-		dev_dbg(dev, "failed to get enable gpio: %d\n", err);
+		DRM_DEV_DEBUG(dev, "failed to get enable gpio: %d\n", err);
 		innolux->enable_gpio = NULL;
 	}
 
-- 
2.12.0