[PATCH v1 13/19] drm/panel: orisetech: use DRM_DEV*

[Sam Ravnborg]

Introduce use of DRM_DEV* for logging.
This makes logging in the drm subsystem more consistent.

Signed-off-by: Sam Ravnborg <sam at ravnborg.org>
Cc: Thierry Reding <thierry.reding at gmail.com>
Cc: David Airlie <airlied at linux.ie>
Cc: Daniel Vetter <daniel at ffwll.ch>
---
 drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
index 5bacf3f2da05..e7920ae018bd 100644
--- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
+++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
@@ -431,14 +431,14 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
 
 	ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(ctx->reset_gpio)) {
-		dev_err(dev, "cannot get reset-gpio\n");
+		DRM_DEV_ERROR(dev, "cannot get reset-gpio\n");
 		return PTR_ERR(ctx->reset_gpio);
 	}
 
 	ctx->supply = devm_regulator_get(dev, "power");
 	if (IS_ERR(ctx->supply)) {
 		ret = PTR_ERR(ctx->supply);
-		dev_err(dev, "failed to request regulator: %d\n", ret);
+		DRM_DEV_ERROR(dev, "failed to request regulator: %d\n", ret);
 		return ret;
 	}
 
@@ -461,7 +461,7 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
 						     NULL);
 	if (IS_ERR(ctx->bl_dev)) {
 		ret = PTR_ERR(ctx->bl_dev);
-		dev_err(dev, "failed to register backlight: %d\n", ret);
+		DRM_DEV_ERROR(dev, "failed to register backlight: %d\n", ret);
 		return ret;
 	}
 
@@ -474,7 +474,7 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
 
 	ret = mipi_dsi_attach(dsi);
 	if (ret < 0) {
-		dev_err(dev, "mipi_dsi_attach failed. Is host ready?\n");
+		DRM_DEV_ERROR(dev, "mipi_dsi_attach failed. Is host ready?\n");
 		drm_panel_remove(&ctx->panel);
 		backlight_device_unregister(ctx->bl_dev);
 		return ret;
-- 
2.12.0