[PATCH 3/4] backlight: add led-backlight driver
Daniel Thompson
daniel.thompson at linaro.org
Tue Jul 2 13:04:34 UTC 2019
On Tue, Jul 02, 2019 at 12:59:53PM +0200, Jean-Jacques Hiblot wrote:
> Hi Daniel,
>
> On 02/07/2019 11:54, Daniel Thompson wrote:
> > On Mon, Jul 01, 2019 at 05:14:22PM +0200, Jean-Jacques Hiblot wrote:
> > > From: Tomi Valkeinen <tomi.valkeinen at ti.com>
> > >
> > > This patch adds a led-backlight driver (led_bl), which is mostly similar to
> > > pwm_bl except the driver uses a LED class driver to adjust the brightness
> > > in the HW.
> > >
> > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
> > > Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
> > > ---
> > > drivers/video/backlight/Kconfig | 7 +
> > > drivers/video/backlight/Makefile | 1 +
> > > drivers/video/backlight/led_bl.c | 217 +++++++++++++++++++++++++++++++
> > > 3 files changed, 225 insertions(+)
> > > create mode 100644 drivers/video/backlight/led_bl.c
> > >
> > > diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> > > index 8b081d61773e..585a1787618c 100644
> > > --- a/drivers/video/backlight/Kconfig
> > > +++ b/drivers/video/backlight/Kconfig
> > > @@ -458,6 +458,13 @@ config BACKLIGHT_RAVE_SP
> > > help
> > > Support for backlight control on RAVE SP device.
> > > +config BACKLIGHT_LED
> > > + tristate "Generic LED based Backlight Driver"
> > > + depends on LEDS_CLASS && OF
> > > + help
> > > + If you have a LCD backlight adjustable by LED class driver, say Y
> > > + to enable this driver.
> > > +
> > > endif # BACKLIGHT_CLASS_DEVICE
> > > endmenu
> > > diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
> > > index 63c507c07437..2a67642966a5 100644
> > > --- a/drivers/video/backlight/Makefile
> > > +++ b/drivers/video/backlight/Makefile
> > > @@ -57,3 +57,4 @@ obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.o
> > > obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
> > > obj-$(CONFIG_BACKLIGHT_ARCXCNN) += arcxcnn_bl.o
> > > obj-$(CONFIG_BACKLIGHT_RAVE_SP) += rave-sp-backlight.o
> > > +obj-$(CONFIG_BACKLIGHT_LED) += led_bl.o
> > > diff --git a/drivers/video/backlight/led_bl.c b/drivers/video/backlight/led_bl.c
> > > new file mode 100644
> > > index 000000000000..e699924cc2bc
> > > --- /dev/null
> > > +++ b/drivers/video/backlight/led_bl.c
> > > @@ -0,0 +1,217 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * Copyright (C) 2015-2018 Texas Instruments Incorporated - http://www.ti.com/
> > > + * Author: Tomi Valkeinen <tomi.valkeinen at ti.com>
> > > + *
> > > + * Based on pwm_bl.c
> > > + */
> > > +
> > > +#include <linux/backlight.h>
> > > +#include <linux/gpio/consumer.h>
> > > +#include <linux/leds.h>
> > > +#include <linux/module.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/regulator/consumer.h>
> > > +#include <linux/slab.h>
> > > +
> > > +struct led_bl_data {
> > > + struct device *dev;
> > > + struct backlight_device *bl_dev;
> > > +
> > > + unsigned int *levels;
> > > + bool enabled;
> > > + struct regulator *power_supply;
> > > + struct gpio_desc *enable_gpio;
> > For the PWM driver the power_supply and enable_gpio are part of managing
> > a dumb LED driver device that is downstream of the PWM.
> >
> > What is their purpose when we wrap an LED device? Put another why why isn't
> > the LED device driver responsible for this?
>
> This question came up when the patch was first proposed in 2015. Here is the
> answer from Tomi at the time. It is still relevant.
>
> "These are for the backlight, not for the LED chip. So "LED" here is a
> chip that produces (most likely) a PWM signal, and "backlight" is the
> collection of components that use the PWM to produce the backlight
> itself, and use the power-supply and gpios."
Expanded significantly in the associated thread, right?
https://patchwork.kernel.org/patch/7293991/
Also still relevant is whether the LED device is being correctly
modelled if the act of turning on the LED doesn't, in fact, turn the LED
on. Is it *really* a correct implementation of an LED device that
setting it to LED_FULL using sysfs doesn't cause it to light up?
Actually there is another area where I think an LED backlight should
perhaps be held to a higher standard than a PWM backlight and that is
handling backlights composed of multiple LEDs.
Using the TLC591xx examples from the thread above... these are
multi-channel (8 or 16) LED controllers and I don't think its
speculative to assume that a backlight could constructed using
one of these could require multiple LEDs.
Daniel.
>
> >
> > > +
> > > + struct led_classdev *led_cdev;
> > > +
> > > + unsigned int max_brightness;
> > > + unsigned int default_brightness;
> > > +};
> > > +
> > > +static void led_bl_set_brightness(struct led_bl_data *priv, int brightness)
> > > +{
> > > + int err;
> > > +
> > > + if (!priv->enabled) {
> > > + err = regulator_enable(priv->power_supply);
> > > + if (err < 0)
> > > + dev_err(priv->dev, "failed to enable power supply\n");
> > > +
> > > + if (priv->enable_gpio)
> > > + gpiod_set_value_cansleep(priv->enable_gpio, 1);
> > > + }
> > > +
> > > + led_set_brightness(priv->led_cdev, priv->levels[brightness]);
> > > +
> > > + priv->enabled = true;
> > > +}
> > > +
> > > +static void led_bl_power_off(struct led_bl_data *priv)
> > > +{
> > > + if (!priv->enabled)
> > > + return;
> > > +
> > > + led_set_brightness(priv->led_cdev, LED_OFF);
> > > +
> > > + if (priv->enable_gpio)
> > > + gpiod_set_value_cansleep(priv->enable_gpio, 0);
> > > +
> > > + regulator_disable(priv->power_supply);
> > > +
> > > + priv->enabled = false;
> > > +}
> > > +
> > > +static int led_bl_update_status(struct backlight_device *bl)
> > > +{
> > > + struct led_bl_data *priv = bl_get_data(bl);
> > > + int brightness = bl->props.brightness;
> > > +
> > > + if (bl->props.power != FB_BLANK_UNBLANK ||
> > > + bl->props.fb_blank != FB_BLANK_UNBLANK ||
> > > + bl->props.state & BL_CORE_FBBLANK)
> > > + brightness = 0;
> > > +
> > > + if (brightness > 0)
> > > + led_bl_set_brightness(priv, brightness);
> > > + else
> > > + led_bl_power_off(priv);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static const struct backlight_ops led_bl_ops = {
> > > + .update_status = led_bl_update_status,
> > > +};
> > > +
> > > +static int led_bl_parse_dt(struct device *dev,
> > > + struct led_bl_data *priv)
> > > +{
> > > + struct device_node *node = dev->of_node;
> > > + int num_levels;
> > > + u32 *levels;
> > > + u32 value;
> > > + int ret;
> > > +
> > > + if (!node)
> > > + return -ENODEV;
> > > +
> > > + num_levels = of_property_count_u32_elems(node, "brightness-levels");
> > Is there any reason that this function cannot use the (more generic)
> > device property API throughout this function?
>
> No reason. The code is a bit old, and can do with an update.
>
> Are you thinking of of_property_read_u32_array(), or another function ?
>
> JJ
>
> >
> >
> >
> > Daniel.
> >
> >
> > > + if (num_levels < 0)
> > > + return num_levels;
> > > +
> > > + levels = devm_kzalloc(dev, sizeof(u32) * num_levels, GFP_KERNEL);
> > > + if (!levels)
> > > + return -ENOMEM;
> > > +
> > > + ret = of_property_read_u32_array(node, "brightness-levels",
> > > + levels,
> > > + num_levels);
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + ret = of_property_read_u32(node, "default-brightness-level", &value);
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + if (value >= num_levels) {
> > > + dev_err(dev, "invalid default-brightness-level\n");
> > > + return -EINVAL;
> > > + }
> > > +
> > > + priv->levels = levels;
> > > + priv->max_brightness = num_levels - 1;
> > > + priv->default_brightness = value;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int led_bl_probe(struct platform_device *pdev)
> > > +{
> > > + struct backlight_properties props;
> > > + struct led_bl_data *priv;
> > > + int ret;
> > > +
> > > + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> > > + if (!priv)
> > > + return -ENOMEM;
> > > +
> > > + platform_set_drvdata(pdev, priv);
> > > +
> > > + priv->dev = &pdev->dev;
> > > + priv->led_cdev = to_led_classdev(pdev->dev.parent);
> > > +
> > > + ret = led_bl_parse_dt(&pdev->dev, priv);
> > > + if (ret < 0) {
> > > + if (ret != -EPROBE_DEFER)
> > > + dev_err(&pdev->dev, "failed to parse DT data\n");
> > > + return ret;
> > > + }
> > > +
> > > + priv->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
> > > + GPIOD_OUT_LOW);
> > > + if (IS_ERR(priv->enable_gpio)) {
> > > + ret = PTR_ERR(priv->enable_gpio);
> > > + goto err;
> > > + }
> > > +
> > > + priv->power_supply = devm_regulator_get(&pdev->dev, "power");
> > > + if (IS_ERR(priv->power_supply)) {
> > > + ret = PTR_ERR(priv->power_supply);
> > > + goto err;
> > > + }
> > > +
> > > + memset(&props, 0, sizeof(struct backlight_properties));
> > > + props.type = BACKLIGHT_RAW;
> > > + props.max_brightness = priv->max_brightness;
> > > + priv->bl_dev = backlight_device_register(dev_name(&pdev->dev),
> > > + &pdev->dev, priv, &led_bl_ops, &props);
> > > + if (IS_ERR(priv->bl_dev)) {
> > > + dev_err(&pdev->dev, "failed to register backlight\n");
> > > + ret = PTR_ERR(priv->bl_dev);
> > > + goto err;
> > > + }
> > > +
> > > + priv->bl_dev->props.brightness = priv->default_brightness;
> > > + backlight_update_status(priv->bl_dev);
> > > +
> > > + return 0;
> > > +
> > > +err:
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static int led_bl_remove(struct platform_device *pdev)
> > > +{
> > > + struct led_bl_data *priv = platform_get_drvdata(pdev);
> > > + struct backlight_device *bl = priv->bl_dev;
> > > +
> > > + backlight_device_unregister(bl);
> > > +
> > > + led_bl_power_off(priv);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static const struct of_device_id led_bl_of_match[] = {
> > > + { .compatible = "led-backlight" },
> > > + { }
> > > +};
> > > +
> > > +MODULE_DEVICE_TABLE(of, led_bl_of_match);
> > > +
> > > +static struct platform_driver led_bl_driver = {
> > > + .driver = {
> > > + .name = "led-backlight",
> > > + .of_match_table = of_match_ptr(led_bl_of_match),
> > > + },
> > > + .probe = led_bl_probe,
> > > + .remove = led_bl_remove,
> > > +};
> > > +
> > > +module_platform_driver(led_bl_driver);
> > > +
> > > +MODULE_DESCRIPTION("LED based Backlight Driver");
> > > +MODULE_LICENSE("GPL");
> > > +MODULE_ALIAS("platform:led-backlight");
> > > --
> > > 2.17.1
> > >
More information about the dri-devel
mailing list