[PATCH 1/2] drm/komeda: Computing layer_split internally

[james qian wang (Arm Technology China)]

For layer_split no need user to enable/disable it, but compute it in
komeda internally, komeda will enable it if the scaling exceed the
acceptable range of scaler.

Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang at arm.com>
---
 drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h  |  3 ++-
 .../drm/arm/display/komeda/komeda_pipeline_state.c    | 11 ++++++++++-
 drivers/gpu/drm/arm/display/komeda/komeda_plane.c     |  3 +--
 .../gpu/drm/arm/display/komeda/komeda_wb_connector.c  | 10 +---------
 4 files changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
index fc1b8613385e..a90bcbb3cb23 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
@@ -537,7 +537,8 @@ void komeda_pipeline_disable(struct komeda_pipeline *pipe,
 void komeda_pipeline_update(struct komeda_pipeline *pipe,
 			    struct drm_atomic_state *old_state);
 
-void komeda_complete_data_flow_cfg(struct komeda_data_flow_cfg *dflow,
+void komeda_complete_data_flow_cfg(struct komeda_layer *layer,
+				   struct komeda_data_flow_cfg *dflow,
 				   struct drm_framebuffer *fb);
 
 #endif /* _KOMEDA_PIPELINE_H_*/
diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
index 2b415ef2b7d3..972a0f25254d 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
@@ -784,9 +784,11 @@ komeda_timing_ctrlr_validate(struct komeda_timing_ctrlr *ctrlr,
 	return 0;
 }
 
-void komeda_complete_data_flow_cfg(struct komeda_data_flow_cfg *dflow,
+void komeda_complete_data_flow_cfg(struct komeda_layer *layer,
+				   struct komeda_data_flow_cfg *dflow,
 				   struct drm_framebuffer *fb)
 {
+	struct komeda_scaler *scaler = layer->base.pipeline->scalers[0];
 	u32 w = dflow->in_w;
 	u32 h = dflow->in_h;
 
@@ -803,6 +805,13 @@ void komeda_complete_data_flow_cfg(struct komeda_data_flow_cfg *dflow,
 
 	dflow->en_scaling = (w != dflow->out_w) || (h != dflow->out_h);
 	dflow->is_yuv = fb->format->is_yuv;
+
+	/* try to enable split if scaling exceed the scaler's acceptable
+	 * input/output range.
+	 */
+	if (dflow->en_scaling && scaler)
+		dflow->en_split = !in_range(&scaler->hsize, dflow->in_w) ||
+				  !in_range(&scaler->hsize, dflow->out_w);
 }
 
 static bool merger_is_available(struct komeda_pipeline *pipe,
diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_plane.c b/drivers/gpu/drm/arm/display/komeda/komeda_plane.c
index 5bb8553cc117..b1386438357b 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_plane.c
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_plane.c
@@ -58,9 +58,8 @@ komeda_plane_init_data_flow(struct drm_plane_state *st,
 	}
 
 	dflow->en_img_enhancement = !!kplane_st->img_enhancement;
-	dflow->en_split = !!kplane_st->layer_split;
 
-	komeda_complete_data_flow_cfg(dflow, fb);
+	komeda_complete_data_flow_cfg(kplane->layer, dflow, fb);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
index bb8a61f6e9a4..617e1f7b8472 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
@@ -13,7 +13,6 @@ komeda_wb_init_data_flow(struct komeda_layer *wb_layer,
 			 struct komeda_crtc_state *kcrtc_st,
 			 struct komeda_data_flow_cfg *dflow)
 {
-	struct komeda_scaler *scaler = wb_layer->base.pipeline->scalers[0];
 	struct drm_framebuffer *fb = conn_st->writeback_job->fb;
 
 	memset(dflow, 0, sizeof(*dflow));
@@ -28,14 +27,7 @@ komeda_wb_init_data_flow(struct komeda_layer *wb_layer,
 	dflow->pixel_blend_mode = DRM_MODE_BLEND_PIXEL_NONE;
 	dflow->rot = DRM_MODE_ROTATE_0;
 
-	komeda_complete_data_flow_cfg(dflow, fb);
-
-	/* if scaling exceed the acceptable scaler input/output range, try to
-	 * enable split.
-	 */
-	if (dflow->en_scaling && scaler)
-		dflow->en_split = !in_range(&scaler->hsize, dflow->in_w) ||
-				  !in_range(&scaler->hsize, dflow->out_w);
+	komeda_complete_data_flow_cfg(wb_layer, dflow, fb);
 
 	return 0;
 }
-- 
2.20.1