[PATCH] drm/atmel-hlcdc: set layer REP bit to enable replication logic

[Boris Brezillon]

On Fri, 12 Jul 2019 18:21:17 +0200
Sam Ravnborg <sam at ravnborg.org> wrote:

> Hi Joshua.
> 
> On Tue, Jul 09, 2019 at 04:24:49PM +0000, Nicolas.Ferre at microchip.com wrote:
> > On 09/07/2019 at 17:35, Joshua Henderson wrote:  
> > > This bit enables replication logic to expand an RGB color less than 24
> > > bits, to 24 bits, which is used internally for all formats.  Otherwise,
> > > the least significant bits are always set to zero and the color may not
> > > be what is expected.
> > > 
> > > Signed-off-by: Joshua Henderson <joshua.henderson at microchip.com>  
> > 
> > Acked-by: Nicolas Ferre <nicolas.ferre at microchip.com>
> > 
> > Here is patchwork entry:
> > https://patchwork.kernel.org/patch/11037167/
> > 
> > Thanks, best regards,
> >    Nicolas
> >   
> > > ---
> > >   drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 2 +-
> > >   1 file changed, 1 insertion(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> > > index eb7c4cf..6f6cf61 100644
> > > --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> > > +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> > > @@ -389,7 +389,7 @@ atmel_hlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
> > >   	atmel_hlcdc_layer_write_cfg(&plane->layer, ATMEL_HLCDC_LAYER_DMA_CFG,
> > >   				    cfg);
> > >   
> > > -	cfg = ATMEL_HLCDC_LAYER_DMA;
> > > +	cfg = ATMEL_HLCDC_LAYER_DMA | ATMEL_HLCDC_LAYER_REP;
> > >   
> > >   	if (plane->base.type != DRM_PLANE_TYPE_PRIMARY) {
> > >   		cfg |= ATMEL_HLCDC_LAYER_OVR | ATMEL_HLCDC_LAYER_ITER2BL |  
> 
> Thanks - this gave me an opportunity to read a bit more in the datasheet
> of the controller.
> Applied to drm-misc-next with Ack from Nicolas.

Was about to add my R-b and ask you to apply the patch. I'm glad you
didn't wait for my feedback though, that means I'll soon be able to
remove my name from the Atmel HLCDC entry in MAINTAINERS ;-).