[PATCH v1 5/6] drm/via: drop DRM_WAIT_ON() in via_irq
Sam Ravnborg
sam at ravnborg.org
Thu Jul 18 15:37:36 UTC 2019
Replace DRM_WAIT_ON() with wait_event_interruptible().
While replacing be careful to keep same return value semantics.
Signed-off-by: Sam Ravnborg <sam at ravnborg.org>
Cc: Kevin Brace <kevinbrace at gmx.com>
Cc: Thomas Hellstrom <thellstrom at vmware.com>
Cc: "Gustavo A. R. Silva" <gustavo at embeddedor.com>
Cc: Mike Marshall <hubcap at omnibond.com>
Cc: Ira Weiny <ira.weiny at intel.com>
Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
Cc: Emil Velikov <emil.velikov at collabora.com>
---
drivers/gpu/drm/via/via_irq.c | 34 ++++++++++++++++++++++++----------
1 file changed, 24 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c
index 9d47feb367d8..6de15065a3c0 100644
--- a/drivers/gpu/drm/via/via_irq.c
+++ b/drivers/gpu/drm/via/via_irq.c
@@ -36,7 +36,6 @@
*/
#include <drm/drm_device.h>
-#include <drm/drm_os_linux.h>
#include <drm/drm_vblank.h>
#include <drm/via_drm.h>
@@ -201,6 +200,12 @@ void via_disable_vblank(struct drm_device *dev, unsigned int pipe)
DRM_ERROR("%s: bad crtc %u\n", __func__, pipe);
}
+/*
+ * Returns:
+ * 0 if interrupt occured within 3 secs
+ * -EBUSY if timeout happended
+ * -EINTR if interrupted by a signal
+ */
static int
via_driver_irq_wait(struct drm_device *dev, unsigned int irq, int force_sequence,
unsigned int *sequence)
@@ -208,7 +213,7 @@ via_driver_irq_wait(struct drm_device *dev, unsigned int irq, int force_sequence
drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private;
unsigned int cur_irq_sequence;
drm_via_irq_t *cur_irq;
- int ret = 0;
+ int ret;
maskarray_t *masks;
int real_irq;
@@ -236,18 +241,27 @@ via_driver_irq_wait(struct drm_device *dev, unsigned int irq, int force_sequence
cur_irq = dev_priv->via_irqs + real_irq;
if (masks[real_irq][2] && !force_sequence) {
- DRM_WAIT_ON(ret, cur_irq->irq_queue, 3 * HZ,
- ((VIA_READ(masks[irq][2]) & masks[irq][3]) ==
- masks[irq][4]));
+ ret = wait_event_interruptible_timeout(cur_irq->irq_queue,
+ ((VIA_READ(masks[irq][2]) & masks[irq][3]) == masks[irq][4]),
+ msecs_to_jiffies(3000));
cur_irq_sequence = atomic_read(&cur_irq->irq_received);
} else {
- DRM_WAIT_ON(ret, cur_irq->irq_queue, 3 * HZ,
- (((cur_irq_sequence =
- atomic_read(&cur_irq->irq_received)) -
- *sequence) <= (1 << 23)));
+ ret = wait_event_interruptible_timeout(cur_irq->irq_queue,
+ (((cur_irq_sequence = atomic_read(&cur_irq->irq_received)) - *sequence) <= (1 << 23)),
+ msecs_to_jiffies(3000));
}
*sequence = cur_irq_sequence;
- return ret;
+
+ switch (ret) {
+ case 0:
+ /* timeout */
+ return -EBUSY;
+ case -ERESTARTSYS:
+ /* interrupted by signal */
+ return -EINTR;
+ default:
+ return 0;
+ }
}
--
2.20.1
More information about the dri-devel
mailing list