[PATCH v2 05/11] drm/tinydrm: Remove tinydrm_spi_max_transfer_size()
Noralf Trønnes
noralf at tronnes.org
Fri Jul 19 15:59:10 UTC 2019
spi-bcm2835 can handle >64kB buffers now so there is no need to check
->max_dma_len. The tinydrm_spi_max_transfer_size() max_len argument is
not used by any callers, so not needed.
Then we have the spi_max module parameter. It was added because
staging/fbtft has support for it and there was a report that someone used
it to set a small buffer size to avoid popping on a USB soundcard on a
Raspberry Pi. In hindsight it shouldn't have been added, I should have
waited for it to become a problem first. I don't know it anyone is
actually using it, but since tinydrm_spi_transfer() is being moved to
mipi-dbi, I'm taking the opportunity to remove it. I'll add it back to
mipi-dbi if someone complains.
With that out of the way, spi_max_transfer_size() can be used instead.
The chosen 16kB buffer size for Type C Option 1 (9-bit) interface is
somewhat arbitrary, but a bigger buffer will have a miniscule impact on
transfer speed, so it's probably fine.
Acked-by: Sam Ravnborg <sam at ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf at tronnes.org>
---
.../gpu/drm/tinydrm/core/tinydrm-helpers.c | 37 +------------------
drivers/gpu/drm/tinydrm/mipi-dbi.c | 10 +----
include/drm/tinydrm/tinydrm-helpers.h | 1 -
3 files changed, 3 insertions(+), 45 deletions(-)
diff --git a/drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c b/drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c
index 272616a246cd..af5bec8861de 100644
--- a/drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c
+++ b/drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c
@@ -18,41 +18,8 @@
#include <drm/drm_rect.h>
#include <drm/tinydrm/tinydrm-helpers.h>
-static unsigned int spi_max;
-module_param(spi_max, uint, 0400);
-MODULE_PARM_DESC(spi_max, "Set a lower SPI max transfer size");
-
#if IS_ENABLED(CONFIG_SPI)
-/**
- * tinydrm_spi_max_transfer_size - Determine max SPI transfer size
- * @spi: SPI device
- * @max_len: Maximum buffer size needed (optional)
- *
- * This function returns the maximum size to use for SPI transfers. It checks
- * the SPI master, the optional @max_len and the module parameter spi_max and
- * returns the smallest.
- *
- * Returns:
- * Maximum size for SPI transfers
- */
-size_t tinydrm_spi_max_transfer_size(struct spi_device *spi, size_t max_len)
-{
- size_t ret;
-
- ret = min(spi_max_transfer_size(spi), spi->master->max_dma_len);
- if (max_len)
- ret = min(ret, max_len);
- if (spi_max)
- ret = min_t(size_t, ret, spi_max);
- ret &= ~0x3;
- if (ret < 4)
- ret = 4;
-
- return ret;
-}
-EXPORT_SYMBOL(tinydrm_spi_max_transfer_size);
-
/**
* tinydrm_spi_transfer - SPI transfer helper
* @spi: SPI device
@@ -75,21 +42,19 @@ int tinydrm_spi_transfer(struct spi_device *spi, u32 speed_hz,
struct spi_transfer *header, u8 bpw, const void *buf,
size_t len)
{
+ size_t max_chunk = spi_max_transfer_size(spi);
struct spi_transfer tr = {
.bits_per_word = bpw,
.speed_hz = speed_hz,
};
struct spi_message m;
u16 *swap_buf = NULL;
- size_t max_chunk;
size_t chunk;
int ret = 0;
if (WARN_ON_ONCE(bpw != 8 && bpw != 16))
return -EINVAL;
- max_chunk = tinydrm_spi_max_transfer_size(spi, 0);
-
if (bpw == 16 && !spi_is_bpw_supported(spi, 16)) {
tr.bits_per_word = 8;
if (tinydrm_machine_little_endian()) {
diff --git a/drivers/gpu/drm/tinydrm/mipi-dbi.c b/drivers/gpu/drm/tinydrm/mipi-dbi.c
index 99509d16b037..ae31a5c9aa1b 100644
--- a/drivers/gpu/drm/tinydrm/mipi-dbi.c
+++ b/drivers/gpu/drm/tinydrm/mipi-dbi.c
@@ -964,15 +964,9 @@ static int mipi_dbi_typec3_command(struct mipi_dbi *mipi, u8 *cmd,
int mipi_dbi_spi_init(struct spi_device *spi, struct mipi_dbi *mipi,
struct gpio_desc *dc)
{
- size_t tx_size = tinydrm_spi_max_transfer_size(spi, 0);
struct device *dev = &spi->dev;
int ret;
- if (tx_size < 16) {
- DRM_ERROR("SPI transmit buffer too small: %zu\n", tx_size);
- return -EINVAL;
- }
-
/*
* Even though it's not the SPI device that does DMA (the master does),
* the dma mask is necessary for the dma_alloc_wc() in
@@ -1001,8 +995,8 @@ int mipi_dbi_spi_init(struct spi_device *spi, struct mipi_dbi *mipi,
mipi->swap_bytes = true;
} else {
mipi->command = mipi_dbi_typec1_command;
- mipi->tx_buf9_len = tx_size;
- mipi->tx_buf9 = devm_kmalloc(dev, tx_size, GFP_KERNEL);
+ mipi->tx_buf9_len = SZ_16K;
+ mipi->tx_buf9 = devm_kmalloc(dev, mipi->tx_buf9_len, GFP_KERNEL);
if (!mipi->tx_buf9)
return -ENOMEM;
}
diff --git a/include/drm/tinydrm/tinydrm-helpers.h b/include/drm/tinydrm/tinydrm-helpers.h
index dca75de3a359..10b35375a009 100644
--- a/include/drm/tinydrm/tinydrm-helpers.h
+++ b/include/drm/tinydrm/tinydrm-helpers.h
@@ -41,7 +41,6 @@ int tinydrm_display_pipe_init(struct drm_device *drm,
const struct drm_display_mode *mode,
unsigned int rotation);
-size_t tinydrm_spi_max_transfer_size(struct spi_device *spi, size_t max_len);
int tinydrm_spi_transfer(struct spi_device *spi, u32 speed_hz,
struct spi_transfer *header, u8 bpw, const void *buf,
size_t len);
--
2.20.1
More information about the dri-devel
mailing list