[PATCH 3/3] drm/bridge: Add NWL MIPI DSI host controller support

Guido Günther agx at sigxcpu.org
Wed Jul 31 16:54:00 UTC 2019


Hi,
On Wed, Jul 31, 2019 at 11:43:47AM -0300, Fabio Estevam wrote:
> Hi Guido,
> 
> On Wed, Jul 31, 2019 at 11:35 AM Guido Günther <agx at sigxcpu.org> wrote:
> 
> > The idea is to have
> >
> >     "%sabling platform clocks", enable ? "en" : "dis");
> >
> > depending whether clocks are enabled/disabled.
> 
> Yes, I understood the idea, but this would print:
> 
> ensabling or dissabling :-)

The 's' is from the '%s' format specifier:

[ 2610.804174] imx-nwl-dsi 30a00000.mipi_dsi: [drm:imx_nwl_dsi_bridge_disable] disabling platform clocks
[ 2710.996279] imx-nwl-dsi 30a00000.mipi_dsi: [drm:imx_nwl_dsi_bridge_pre_enable] enabling platform clocks

I'll change that to use the full strings though since i also had to look
twice to be sure there's no double 's'.

> 
> > > Same here. Please return 'int' instead.
> >
> > This is from drm_bridge_funcs so the prototype is fixed. I'm not sure
> > how what's the best way to bubble up fatal errors through the drm layer?
> 
> Ok, so let's not change this one.
> 
> > I went for DRM_DEV_ERROR() since that what i used in the rest of the
> > driver and these ones were omission. Hope that's o.k.
> 
> No strong preferences here. I just think dev_err() easier to type and shorter.
> 
> Thanks for this work!

Thanks again for having a look!
 -- Guido


More information about the dri-devel mailing list