[v4 2/7] drm/mediatek: fixes CMDQ reg address of mt8173 is different with mt2701

CK Hu ck.hu at mediatek.com
Mon Jun 3 02:13:29 UTC 2019


Hi, Jitao:

On Sat, 2019-06-01 at 17:26 +0800, Jitao Shi wrote:
> Config the different CMDQ reg address in driver data.
> 
> Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 29 ++++++++++++++++++++++++-----
>  1 file changed, 24 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 6c4ac37f983d..a48db056df6c 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -131,7 +131,6 @@
>  #define VM_CMD_EN			BIT(0)
>  #define TS_VFP_EN			BIT(5)
>  
> -#define DSI_CMDQ0		0x180
>  #define CONFIG				(0xff << 0)
>  #define SHORT_PACKET			0
>  #define LONG_PACKET			2
> @@ -156,6 +155,10 @@
>  
>  struct phy;
>  
> +struct mtk_dsi_driver_data {
> +	const u32 reg_cmdq_off;
> +};
> +
>  struct mtk_dsi {
>  	struct mtk_ddp_comp ddp_comp;
>  	struct device *dev;
> @@ -182,6 +185,7 @@ struct mtk_dsi {
>  	bool enabled;
>  	u32 irq_data;
>  	wait_queue_head_t irq_wait_queue;
> +	const struct mtk_dsi_driver_data *driver_data;
>  };
>  
>  static inline struct mtk_dsi *encoder_to_dsi(struct drm_encoder *e)
> @@ -934,6 +938,7 @@ static void mtk_dsi_cmdq(struct mtk_dsi *dsi, const struct mipi_dsi_msg *msg)
>  	const char *tx_buf = msg->tx_buf;
>  	u8 config, cmdq_size, cmdq_off, type = msg->type;
>  	u32 reg_val, cmdq_mask, i;
> +	u32 reg_cmdq_off = dsi->driver_data->reg_cmdq_off;
>  
>  	if (MTK_DSI_HOST_IS_READ(type))
>  		config = BTA;
> @@ -953,9 +958,11 @@ static void mtk_dsi_cmdq(struct mtk_dsi *dsi, const struct mipi_dsi_msg *msg)
>  	}
>  
>  	for (i = 0; i < msg->tx_len; i++)
> -		writeb(tx_buf[i], dsi->regs + DSI_CMDQ0 + cmdq_off + i);
> +		mtk_dsi_mask(dsi, (reg_cmdq_off + cmdq_off + i) & (~0x3U),
> +			     (0xffUL << (((i + cmdq_off) & 3U) * 8U)),
> +			     tx_buf[i] << (((i + cmdq_off) & 3U) * 8U));

I've modify this line to

writeb(tx_buf[i], dsi->regs + reg_cmdq_off + cmdq_off + i);

and this works. The call trace list below

[    8.189067] Call trace:
[    8.191516]  dump_backtrace+0x0/0x164
[    8.195172]  show_stack+0x20/0x2c
[    8.198482]  dump_stack+0xc4/0xfc
[    8.201792]  mtk_dsi_host_transfer+0x248/0x4ac
[    8.206230]  mipi_dsi_device_transfer+0x50/0x64
[    8.210753]  mipi_dsi_dcs_exit_sleep_mode+0x5c/0x8c
[    8.215625]  innolux_panel_prepare+0x128/0x218
[    8.220061]  mtk_dsi_poweron+0x74c/0x7c8
[    8.223976]  mtk_dsi_ddp_start+0x1c/0x28
[    8.227891]  mtk_drm_crtc_atomic_enable+0x310/0x428
[    8.232765]  drm_atomic_helper_commit_modeset_enables+0xa0/0x200
[    8.238764]  mtk_atomic_complete+0x84/0xd0
[    8.242852]  mtk_atomic_commit+0xb8/0xe0
[    8.246769]  drm_atomic_commit+0x50/0x5c
[    8.250684]  drm_atomic_helper_set_config+0x98/0xa0
[    8.255555]  drm_mode_setcrtc+0x280/0x618
[    8.259558]  drm_ioctl_kernel+0xcc/0x10c
[    8.263473]  drm_ioctl+0x248/0x3d4
[    8.266868]  drm_compat_ioctl+0xd8/0xe8
[    8.270698]  __arm64_compat_sys_ioctl+0xf4/0x25c
[    8.275309]  el0_svc_common+0x9c/0xfc
[    8.278965]  el0_svc_compat_handler+0x2c/0x38
[    8.283314]  el0_svc_compat+0x8/0x18

So I think writeb() could work correctly. If you have meet some problem,
it might be other problem.

Regards,
CK

>  
> -	mtk_dsi_mask(dsi, DSI_CMDQ0, cmdq_mask, reg_val);
> +	mtk_dsi_mask(dsi, reg_cmdq_off, cmdq_mask, reg_val);
>  	mtk_dsi_mask(dsi, DSI_CMDQ_SIZE, CMDQ_SIZE, cmdq_size);
>  }
>  
> @@ -1101,6 +1108,8 @@ static int mtk_dsi_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto err_unregister_host;
>  
> +	dsi->driver_data = of_device_get_match_data(dev);
> +
>  	dsi->engine_clk = devm_clk_get(dev, "engine");
>  	if (IS_ERR(dsi->engine_clk)) {
>  		ret = PTR_ERR(dsi->engine_clk);
> @@ -1193,9 +1202,19 @@ static int mtk_dsi_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +static const struct mtk_dsi_driver_data mt8173_dsi_driver_data = {
> +	.reg_cmdq_off = 0x200,
> +};
> +
> +static const struct mtk_dsi_driver_data mt2701_dsi_driver_data = {
> +	.reg_cmdq_off = 0x180,
> +};
> +
>  static const struct of_device_id mtk_dsi_of_match[] = {
> -	{ .compatible = "mediatek,mt2701-dsi" },
> -	{ .compatible = "mediatek,mt8173-dsi" },
> +	{ .compatible = "mediatek,mt2701-dsi",
> +	  .data = &mt2701_dsi_driver_data },
> +	{ .compatible = "mediatek,mt8173-dsi",
> +	  .data = &mt8173_dsi_driver_data },
>  	{ },
>  };
>  




More information about the dri-devel mailing list