[PATCH 2/3] drm/i915/dsi: Move vlv/icl_dphy_param_init call out of intel_dsi_vbt_init (v2)
Ville Syrjälä
ville.syrjala at linux.intel.com
Wed Jun 5 18:37:28 UTC 2019
On Wed, Jun 05, 2019 at 08:17:34PM +0200, Hans de Goede wrote:
> The vlv/icl_dphy_param_init calls do various calculations to set dphy
> parameters based on the pclk.
>
> Move the calling of vlv/icl_dphy_param_init to vlv_dsi_init to give
> vlv_dsi_init a chance to tweak the pclk before these calculations are done.
>
> Changes in v2:
> -Also moves the icl and vlv specific dphy_param_init functions from the
> generic intel_dsi_vbt.c file into the icl_ and vlv_dsi.c specific files.
>
> Note icl_dphy_param_init() and vlv_dphy_param_init() are only moved,
> otherwise they are completely unchanged.
>
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/i915/icl_dsi.c | 108 ++++++++++
> drivers/gpu/drm/i915/intel_dsi.h | 1 +
> drivers/gpu/drm/i915/intel_dsi_vbt.c | 282 +--------------------------
> drivers/gpu/drm/i915/vlv_dsi.c | 170 ++++++++++++++++
> 4 files changed, 280 insertions(+), 281 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/icl_dsi.c b/drivers/gpu/drm/i915/icl_dsi.c
> index 9d962ea1e635..511c76e788ef 100644
> --- a/drivers/gpu/drm/i915/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/icl_dsi.c
> @@ -1363,6 +1363,113 @@ static const struct mipi_dsi_host_ops gen11_dsi_host_ops = {
> .transfer = gen11_dsi_host_transfer,
> };
>
> +#define ICL_PREPARE_CNT_MAX 0x7
> +#define ICL_CLK_ZERO_CNT_MAX 0xf
> +#define ICL_TRAIL_CNT_MAX 0x7
> +#define ICL_TCLK_PRE_CNT_MAX 0x3
> +#define ICL_TCLK_POST_CNT_MAX 0x7
> +#define ICL_HS_ZERO_CNT_MAX 0xf
> +#define ICL_EXIT_ZERO_CNT_MAX 0x7
> +
> +static void icl_dphy_param_init(struct intel_dsi *intel_dsi)
> +{
> + struct drm_device *dev = intel_dsi->base.base.dev;
> + struct drm_i915_private *dev_priv = to_i915(dev);
> + struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
> + u32 tlpx_ns;
> + u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
> + u32 ths_prepare_ns, tclk_trail_ns;
> + u32 hs_zero_cnt;
> + u32 tclk_pre_cnt, tclk_post_cnt;
> +
> + tlpx_ns = intel_dsi_tlpx_ns(intel_dsi);
> +
> + tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
> + ths_prepare_ns = max(mipi_config->ths_prepare,
> + mipi_config->tclk_prepare);
> +
> + /*
> + * prepare cnt in escape clocks
> + * this field represents a hexadecimal value with a precision
> + * of 1.2 – i.e. the most significant bit is the integer
> + * and the least significant 2 bits are fraction bits.
> + * so, the field can represent a range of 0.25 to 1.75
> + */
> + prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * 4, tlpx_ns);
> + if (prepare_cnt > ICL_PREPARE_CNT_MAX) {
> + DRM_DEBUG_KMS("prepare_cnt out of range (%d)\n", prepare_cnt);
> + prepare_cnt = ICL_PREPARE_CNT_MAX;
> + }
> +
> + /* clk zero count in escape clocks */
> + clk_zero_cnt = DIV_ROUND_UP(mipi_config->tclk_prepare_clkzero -
> + ths_prepare_ns, tlpx_ns);
> + if (clk_zero_cnt > ICL_CLK_ZERO_CNT_MAX) {
> + DRM_DEBUG_KMS("clk_zero_cnt out of range (%d)\n", clk_zero_cnt);
> + clk_zero_cnt = ICL_CLK_ZERO_CNT_MAX;
> + }
> +
> + /* trail cnt in escape clocks*/
> + trail_cnt = DIV_ROUND_UP(tclk_trail_ns, tlpx_ns);
> + if (trail_cnt > ICL_TRAIL_CNT_MAX) {
> + DRM_DEBUG_KMS("trail_cnt out of range (%d)\n", trail_cnt);
> + trail_cnt = ICL_TRAIL_CNT_MAX;
> + }
> +
> + /* tclk pre count in escape clocks */
> + tclk_pre_cnt = DIV_ROUND_UP(mipi_config->tclk_pre, tlpx_ns);
> + if (tclk_pre_cnt > ICL_TCLK_PRE_CNT_MAX) {
> + DRM_DEBUG_KMS("tclk_pre_cnt out of range (%d)\n", tclk_pre_cnt);
> + tclk_pre_cnt = ICL_TCLK_PRE_CNT_MAX;
> + }
> +
> + /* tclk post count in escape clocks */
> + tclk_post_cnt = DIV_ROUND_UP(mipi_config->tclk_post, tlpx_ns);
> + if (tclk_post_cnt > ICL_TCLK_POST_CNT_MAX) {
> + DRM_DEBUG_KMS("tclk_post_cnt out of range (%d)\n", tclk_post_cnt);
> + tclk_post_cnt = ICL_TCLK_POST_CNT_MAX;
> + }
> +
> + /* hs zero cnt in escape clocks */
> + hs_zero_cnt = DIV_ROUND_UP(mipi_config->ths_prepare_hszero -
> + ths_prepare_ns, tlpx_ns);
> + if (hs_zero_cnt > ICL_HS_ZERO_CNT_MAX) {
> + DRM_DEBUG_KMS("hs_zero_cnt out of range (%d)\n", hs_zero_cnt);
> + hs_zero_cnt = ICL_HS_ZERO_CNT_MAX;
> + }
> +
> + /* hs exit zero cnt in escape clocks */
> + exit_zero_cnt = DIV_ROUND_UP(mipi_config->ths_exit, tlpx_ns);
> + if (exit_zero_cnt > ICL_EXIT_ZERO_CNT_MAX) {
> + DRM_DEBUG_KMS("exit_zero_cnt out of range (%d)\n", exit_zero_cnt);
> + exit_zero_cnt = ICL_EXIT_ZERO_CNT_MAX;
> + }
> +
> + /* clock lane dphy timings */
> + intel_dsi->dphy_reg = (CLK_PREPARE_OVERRIDE |
> + CLK_PREPARE(prepare_cnt) |
> + CLK_ZERO_OVERRIDE |
> + CLK_ZERO(clk_zero_cnt) |
> + CLK_PRE_OVERRIDE |
> + CLK_PRE(tclk_pre_cnt) |
> + CLK_POST_OVERRIDE |
> + CLK_POST(tclk_post_cnt) |
> + CLK_TRAIL_OVERRIDE |
> + CLK_TRAIL(trail_cnt));
> +
> + /* data lanes dphy timings */
> + intel_dsi->dphy_data_lane_reg = (HS_PREPARE_OVERRIDE |
> + HS_PREPARE(prepare_cnt) |
> + HS_ZERO_OVERRIDE |
> + HS_ZERO(hs_zero_cnt) |
> + HS_TRAIL_OVERRIDE |
> + HS_TRAIL(trail_cnt) |
> + HS_EXIT_OVERRIDE |
> + HS_EXIT(exit_zero_cnt));
> +
> + intel_dsi_log_params(intel_dsi);
> +}
> +
> void icl_dsi_init(struct drm_i915_private *dev_priv)
> {
> struct drm_device *dev = &dev_priv->drm;
> @@ -1455,6 +1562,7 @@ void icl_dsi_init(struct drm_i915_private *dev_priv)
> goto err;
> }
>
> + icl_dphy_param_init(intel_dsi);
> return;
>
> err:
> diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
> index 705a609050c0..2e997187fed5 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.h
> +++ b/drivers/gpu/drm/i915/intel_dsi.h
> @@ -192,5 +192,6 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id);
> void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi,
> enum mipi_seq seq_id);
> void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec);
> +void intel_dsi_log_params(struct intel_dsi *intel_dsi);
>
> #endif /* _INTEL_DSI_H */
> diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
> index 3a187ffabfbd..26fcb3344ebb 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
> +++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
> @@ -41,13 +41,6 @@
> #define MIPI_VIRTUAL_CHANNEL_SHIFT 1
> #define MIPI_PORT_SHIFT 3
>
> -#define PREPARE_CNT_MAX 0x3F
> -#define EXIT_ZERO_CNT_MAX 0x3F
> -#define CLK_ZERO_CNT_MAX 0xFF
> -#define TRAIL_CNT_MAX 0x1F
> -
> -#define NS_KHZ_RATIO 1000000
> -
> /* base offsets for gpio pads */
> #define VLV_GPIO_NC_0_HV_DDI0_HPD 0x4130
> #define VLV_GPIO_NC_1_HV_DDI0_DDC_SDA 0x4120
> @@ -532,7 +525,7 @@ void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec)
> msleep(msec);
> }
>
> -static void intel_dsi_log_params(struct intel_dsi *intel_dsi)
> +void intel_dsi_log_params(struct intel_dsi *intel_dsi)
> {
> DRM_DEBUG_KMS("Pclk %d\n", intel_dsi->pclk);
> DRM_DEBUG_KMS("Pixel overlap %d\n", intel_dsi->pixel_overlap);
> @@ -570,274 +563,6 @@ static void intel_dsi_log_params(struct intel_dsi *intel_dsi)
> enableddisabled(!(intel_dsi->video_frmt_cfg_bits & DISABLE_VIDEO_BTA)));
> }
>
> -#define ICL_PREPARE_CNT_MAX 0x7
> -#define ICL_CLK_ZERO_CNT_MAX 0xf
> -#define ICL_TRAIL_CNT_MAX 0x7
> -#define ICL_TCLK_PRE_CNT_MAX 0x3
> -#define ICL_TCLK_POST_CNT_MAX 0x7
> -#define ICL_HS_ZERO_CNT_MAX 0xf
> -#define ICL_EXIT_ZERO_CNT_MAX 0x7
> -
> -static void icl_dphy_param_init(struct intel_dsi *intel_dsi)
> -{
> - struct drm_device *dev = intel_dsi->base.base.dev;
> - struct drm_i915_private *dev_priv = to_i915(dev);
> - struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
> - u32 tlpx_ns;
> - u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
> - u32 ths_prepare_ns, tclk_trail_ns;
> - u32 hs_zero_cnt;
> - u32 tclk_pre_cnt, tclk_post_cnt;
> -
> - tlpx_ns = intel_dsi_tlpx_ns(intel_dsi);
> -
> - tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
> - ths_prepare_ns = max(mipi_config->ths_prepare,
> - mipi_config->tclk_prepare);
> -
> - /*
> - * prepare cnt in escape clocks
> - * this field represents a hexadecimal value with a precision
> - * of 1.2 – i.e. the most significant bit is the integer
> - * and the least significant 2 bits are fraction bits.
> - * so, the field can represent a range of 0.25 to 1.75
> - */
> - prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * 4, tlpx_ns);
> - if (prepare_cnt > ICL_PREPARE_CNT_MAX) {
> - DRM_DEBUG_KMS("prepare_cnt out of range (%d)\n", prepare_cnt);
> - prepare_cnt = ICL_PREPARE_CNT_MAX;
> - }
> -
> - /* clk zero count in escape clocks */
> - clk_zero_cnt = DIV_ROUND_UP(mipi_config->tclk_prepare_clkzero -
> - ths_prepare_ns, tlpx_ns);
> - if (clk_zero_cnt > ICL_CLK_ZERO_CNT_MAX) {
> - DRM_DEBUG_KMS("clk_zero_cnt out of range (%d)\n", clk_zero_cnt);
> - clk_zero_cnt = ICL_CLK_ZERO_CNT_MAX;
> - }
> -
> - /* trail cnt in escape clocks*/
> - trail_cnt = DIV_ROUND_UP(tclk_trail_ns, tlpx_ns);
> - if (trail_cnt > ICL_TRAIL_CNT_MAX) {
> - DRM_DEBUG_KMS("trail_cnt out of range (%d)\n", trail_cnt);
> - trail_cnt = ICL_TRAIL_CNT_MAX;
> - }
> -
> - /* tclk pre count in escape clocks */
> - tclk_pre_cnt = DIV_ROUND_UP(mipi_config->tclk_pre, tlpx_ns);
> - if (tclk_pre_cnt > ICL_TCLK_PRE_CNT_MAX) {
> - DRM_DEBUG_KMS("tclk_pre_cnt out of range (%d)\n", tclk_pre_cnt);
> - tclk_pre_cnt = ICL_TCLK_PRE_CNT_MAX;
> - }
> -
> - /* tclk post count in escape clocks */
> - tclk_post_cnt = DIV_ROUND_UP(mipi_config->tclk_post, tlpx_ns);
> - if (tclk_post_cnt > ICL_TCLK_POST_CNT_MAX) {
> - DRM_DEBUG_KMS("tclk_post_cnt out of range (%d)\n", tclk_post_cnt);
> - tclk_post_cnt = ICL_TCLK_POST_CNT_MAX;
> - }
> -
> - /* hs zero cnt in escape clocks */
> - hs_zero_cnt = DIV_ROUND_UP(mipi_config->ths_prepare_hszero -
> - ths_prepare_ns, tlpx_ns);
> - if (hs_zero_cnt > ICL_HS_ZERO_CNT_MAX) {
> - DRM_DEBUG_KMS("hs_zero_cnt out of range (%d)\n", hs_zero_cnt);
> - hs_zero_cnt = ICL_HS_ZERO_CNT_MAX;
> - }
> -
> - /* hs exit zero cnt in escape clocks */
> - exit_zero_cnt = DIV_ROUND_UP(mipi_config->ths_exit, tlpx_ns);
> - if (exit_zero_cnt > ICL_EXIT_ZERO_CNT_MAX) {
> - DRM_DEBUG_KMS("exit_zero_cnt out of range (%d)\n", exit_zero_cnt);
> - exit_zero_cnt = ICL_EXIT_ZERO_CNT_MAX;
> - }
> -
> - /* clock lane dphy timings */
> - intel_dsi->dphy_reg = (CLK_PREPARE_OVERRIDE |
> - CLK_PREPARE(prepare_cnt) |
> - CLK_ZERO_OVERRIDE |
> - CLK_ZERO(clk_zero_cnt) |
> - CLK_PRE_OVERRIDE |
> - CLK_PRE(tclk_pre_cnt) |
> - CLK_POST_OVERRIDE |
> - CLK_POST(tclk_post_cnt) |
> - CLK_TRAIL_OVERRIDE |
> - CLK_TRAIL(trail_cnt));
> -
> - /* data lanes dphy timings */
> - intel_dsi->dphy_data_lane_reg = (HS_PREPARE_OVERRIDE |
> - HS_PREPARE(prepare_cnt) |
> - HS_ZERO_OVERRIDE |
> - HS_ZERO(hs_zero_cnt) |
> - HS_TRAIL_OVERRIDE |
> - HS_TRAIL(trail_cnt) |
> - HS_EXIT_OVERRIDE |
> - HS_EXIT(exit_zero_cnt));
> -
> - intel_dsi_log_params(intel_dsi);
> -}
> -
> -static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
> -{
> - struct drm_device *dev = intel_dsi->base.base.dev;
> - struct drm_i915_private *dev_priv = to_i915(dev);
> - struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
> - u32 tlpx_ns, extra_byte_count, tlpx_ui;
> - u32 ui_num, ui_den;
> - u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
> - u32 ths_prepare_ns, tclk_trail_ns;
> - u32 tclk_prepare_clkzero, ths_prepare_hszero;
> - u32 lp_to_hs_switch, hs_to_lp_switch;
> - u32 mul;
> -
> - tlpx_ns = intel_dsi_tlpx_ns(intel_dsi);
> -
> - switch (intel_dsi->lane_count) {
> - case 1:
> - case 2:
> - extra_byte_count = 2;
> - break;
> - case 3:
> - extra_byte_count = 4;
> - break;
> - case 4:
> - default:
> - extra_byte_count = 3;
> - break;
> - }
> -
> - /* in Kbps */
> - ui_num = NS_KHZ_RATIO;
> - ui_den = intel_dsi_bitrate(intel_dsi);
> -
> - tclk_prepare_clkzero = mipi_config->tclk_prepare_clkzero;
> - ths_prepare_hszero = mipi_config->ths_prepare_hszero;
> -
> - /*
> - * B060
> - * LP byte clock = TLPX/ (8UI)
> - */
> - intel_dsi->lp_byte_clk = DIV_ROUND_UP(tlpx_ns * ui_den, 8 * ui_num);
> -
> - /* DDR clock period = 2 * UI
> - * UI(sec) = 1/(bitrate * 10^3) (bitrate is in KHZ)
> - * UI(nsec) = 10^6 / bitrate
> - * DDR clock period (nsec) = 2 * UI = (2 * 10^6)/ bitrate
> - * DDR clock count = ns_value / DDR clock period
> - *
> - * For GEMINILAKE dphy_param_reg will be programmed in terms of
> - * HS byte clock count for other platform in HS ddr clock count
> - */
> - mul = IS_GEMINILAKE(dev_priv) ? 8 : 2;
> - ths_prepare_ns = max(mipi_config->ths_prepare,
> - mipi_config->tclk_prepare);
> -
> - /* prepare count */
> - prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul);
> -
> - if (prepare_cnt > PREPARE_CNT_MAX) {
> - DRM_DEBUG_KMS("prepare count too high %u\n", prepare_cnt);
> - prepare_cnt = PREPARE_CNT_MAX;
> - }
> -
> - /* exit zero count */
> - exit_zero_cnt = DIV_ROUND_UP(
> - (ths_prepare_hszero - ths_prepare_ns) * ui_den,
> - ui_num * mul
> - );
> -
> - /*
> - * Exit zero is unified val ths_zero and ths_exit
> - * minimum value for ths_exit = 110ns
> - * min (exit_zero_cnt * 2) = 110/UI
> - * exit_zero_cnt = 55/UI
> - */
> - if (exit_zero_cnt < (55 * ui_den / ui_num) && (55 * ui_den) % ui_num)
> - exit_zero_cnt += 1;
> -
> - if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) {
> - DRM_DEBUG_KMS("exit zero count too high %u\n", exit_zero_cnt);
> - exit_zero_cnt = EXIT_ZERO_CNT_MAX;
> - }
> -
> - /* clk zero count */
> - clk_zero_cnt = DIV_ROUND_UP(
> - (tclk_prepare_clkzero - ths_prepare_ns)
> - * ui_den, ui_num * mul);
> -
> - if (clk_zero_cnt > CLK_ZERO_CNT_MAX) {
> - DRM_DEBUG_KMS("clock zero count too high %u\n", clk_zero_cnt);
> - clk_zero_cnt = CLK_ZERO_CNT_MAX;
> - }
> -
> - /* trail count */
> - tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
> - trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul);
> -
> - if (trail_cnt > TRAIL_CNT_MAX) {
> - DRM_DEBUG_KMS("trail count too high %u\n", trail_cnt);
> - trail_cnt = TRAIL_CNT_MAX;
> - }
> -
> - /* B080 */
> - intel_dsi->dphy_reg = exit_zero_cnt << 24 | trail_cnt << 16 |
> - clk_zero_cnt << 8 | prepare_cnt;
> -
> - /*
> - * LP to HS switch count = 4TLPX + PREP_COUNT * mul + EXIT_ZERO_COUNT *
> - * mul + 10UI + Extra Byte Count
> - *
> - * HS to LP switch count = THS-TRAIL + 2TLPX + Extra Byte Count
> - * Extra Byte Count is calculated according to number of lanes.
> - * High Low Switch Count is the Max of LP to HS and
> - * HS to LP switch count
> - *
> - */
> - tlpx_ui = DIV_ROUND_UP(tlpx_ns * ui_den, ui_num);
> -
> - /* B044 */
> - /* FIXME:
> - * The comment above does not match with the code */
> - lp_to_hs_switch = DIV_ROUND_UP(4 * tlpx_ui + prepare_cnt * mul +
> - exit_zero_cnt * mul + 10, 8);
> -
> - hs_to_lp_switch = DIV_ROUND_UP(mipi_config->ths_trail + 2 * tlpx_ui, 8);
> -
> - intel_dsi->hs_to_lp_count = max(lp_to_hs_switch, hs_to_lp_switch);
> - intel_dsi->hs_to_lp_count += extra_byte_count;
> -
> - /* B088 */
> - /* LP -> HS for clock lanes
> - * LP clk sync + LP11 + LP01 + tclk_prepare + tclk_zero +
> - * extra byte count
> - * 2TPLX + 1TLPX + 1 TPLX(in ns) + prepare_cnt * 2 + clk_zero_cnt *
> - * 2(in UI) + extra byte count
> - * In byteclks = (4TLPX + prepare_cnt * 2 + clk_zero_cnt *2 (in UI)) /
> - * 8 + extra byte count
> - */
> - intel_dsi->clk_lp_to_hs_count =
> - DIV_ROUND_UP(
> - 4 * tlpx_ui + prepare_cnt * 2 +
> - clk_zero_cnt * 2,
> - 8);
> -
> - intel_dsi->clk_lp_to_hs_count += extra_byte_count;
> -
> - /* HS->LP for Clock Lanes
> - * Low Power clock synchronisations + 1Tx byteclk + tclk_trail +
> - * Extra byte count
> - * 2TLPX + 8UI + (trail_count*2)(in UI) + Extra byte count
> - * In byteclks = (2*TLpx(in UI) + trail_count*2 +8)(in UI)/8 +
> - * Extra byte count
> - */
> - intel_dsi->clk_hs_to_lp_count =
> - DIV_ROUND_UP(2 * tlpx_ui + trail_cnt * 2 + 8,
> - 8);
> - intel_dsi->clk_hs_to_lp_count += extra_byte_count;
> -
> - intel_dsi_log_params(intel_dsi);
> -}
> -
> bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
> {
> struct drm_device *dev = intel_dsi->base.base.dev;
> @@ -925,11 +650,6 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>
> intel_dsi->burst_mode_ratio = burst_mode_ratio;
>
> - if (INTEL_GEN(dev_priv) >= 11)
> - icl_dphy_param_init(intel_dsi);
> - else
> - vlv_dphy_param_init(intel_dsi);
> -
> /* delays in VBT are in unit of 100us, so need to convert
> * here in ms
> * Delay (100us) * 100 /1000 = Delay / 10 (ms) */
> diff --git a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c
> index 255996a71b91..59500c838b9d 100644
> --- a/drivers/gpu/drm/i915/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/vlv_dsi.c
> @@ -1689,6 +1689,174 @@ static void intel_dsi_add_properties(struct intel_connector *connector)
> }
> }
>
> +#define NS_KHZ_RATIO 1000000
> +
> +#define PREPARE_CNT_MAX 0x3F
> +#define EXIT_ZERO_CNT_MAX 0x3F
> +#define CLK_ZERO_CNT_MAX 0xFF
> +#define TRAIL_CNT_MAX 0x1F
> +
> +static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
> +{
> + struct drm_device *dev = intel_dsi->base.base.dev;
> + struct drm_i915_private *dev_priv = to_i915(dev);
> + struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
> + u32 tlpx_ns, extra_byte_count, tlpx_ui;
> + u32 ui_num, ui_den;
> + u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
> + u32 ths_prepare_ns, tclk_trail_ns;
> + u32 tclk_prepare_clkzero, ths_prepare_hszero;
> + u32 lp_to_hs_switch, hs_to_lp_switch;
> + u32 mul;
> +
> + tlpx_ns = intel_dsi_tlpx_ns(intel_dsi);
> +
> + switch (intel_dsi->lane_count) {
> + case 1:
> + case 2:
> + extra_byte_count = 2;
> + break;
> + case 3:
> + extra_byte_count = 4;
> + break;
> + case 4:
> + default:
> + extra_byte_count = 3;
> + break;
> + }
> +
> + /* in Kbps */
> + ui_num = NS_KHZ_RATIO;
> + ui_den = intel_dsi_bitrate(intel_dsi);
> +
> + tclk_prepare_clkzero = mipi_config->tclk_prepare_clkzero;
> + ths_prepare_hszero = mipi_config->ths_prepare_hszero;
> +
> + /*
> + * B060
> + * LP byte clock = TLPX/ (8UI)
> + */
> + intel_dsi->lp_byte_clk = DIV_ROUND_UP(tlpx_ns * ui_den, 8 * ui_num);
> +
> + /* DDR clock period = 2 * UI
> + * UI(sec) = 1/(bitrate * 10^3) (bitrate is in KHZ)
> + * UI(nsec) = 10^6 / bitrate
> + * DDR clock period (nsec) = 2 * UI = (2 * 10^6)/ bitrate
> + * DDR clock count = ns_value / DDR clock period
> + *
> + * For GEMINILAKE dphy_param_reg will be programmed in terms of
> + * HS byte clock count for other platform in HS ddr clock count
> + */
> + mul = IS_GEMINILAKE(dev_priv) ? 8 : 2;
> + ths_prepare_ns = max(mipi_config->ths_prepare,
> + mipi_config->tclk_prepare);
> +
> + /* prepare count */
> + prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul);
> +
> + if (prepare_cnt > PREPARE_CNT_MAX) {
> + DRM_DEBUG_KMS("prepare count too high %u\n", prepare_cnt);
> + prepare_cnt = PREPARE_CNT_MAX;
> + }
> +
> + /* exit zero count */
> + exit_zero_cnt = DIV_ROUND_UP(
> + (ths_prepare_hszero - ths_prepare_ns) * ui_den,
> + ui_num * mul
> + );
> +
> + /*
> + * Exit zero is unified val ths_zero and ths_exit
> + * minimum value for ths_exit = 110ns
> + * min (exit_zero_cnt * 2) = 110/UI
> + * exit_zero_cnt = 55/UI
> + */
> + if (exit_zero_cnt < (55 * ui_den / ui_num) && (55 * ui_den) % ui_num)
> + exit_zero_cnt += 1;
> +
> + if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) {
> + DRM_DEBUG_KMS("exit zero count too high %u\n", exit_zero_cnt);
> + exit_zero_cnt = EXIT_ZERO_CNT_MAX;
> + }
> +
> + /* clk zero count */
> + clk_zero_cnt = DIV_ROUND_UP(
> + (tclk_prepare_clkzero - ths_prepare_ns)
> + * ui_den, ui_num * mul);
> +
> + if (clk_zero_cnt > CLK_ZERO_CNT_MAX) {
> + DRM_DEBUG_KMS("clock zero count too high %u\n", clk_zero_cnt);
> + clk_zero_cnt = CLK_ZERO_CNT_MAX;
> + }
> +
> + /* trail count */
> + tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
> + trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul);
> +
> + if (trail_cnt > TRAIL_CNT_MAX) {
> + DRM_DEBUG_KMS("trail count too high %u\n", trail_cnt);
> + trail_cnt = TRAIL_CNT_MAX;
> + }
> +
> + /* B080 */
> + intel_dsi->dphy_reg = exit_zero_cnt << 24 | trail_cnt << 16 |
> + clk_zero_cnt << 8 | prepare_cnt;
> +
> + /*
> + * LP to HS switch count = 4TLPX + PREP_COUNT * mul + EXIT_ZERO_COUNT *
> + * mul + 10UI + Extra Byte Count
> + *
> + * HS to LP switch count = THS-TRAIL + 2TLPX + Extra Byte Count
> + * Extra Byte Count is calculated according to number of lanes.
> + * High Low Switch Count is the Max of LP to HS and
> + * HS to LP switch count
> + *
> + */
> + tlpx_ui = DIV_ROUND_UP(tlpx_ns * ui_den, ui_num);
> +
> + /* B044 */
> + /* FIXME:
> + * The comment above does not match with the code */
> + lp_to_hs_switch = DIV_ROUND_UP(4 * tlpx_ui + prepare_cnt * mul +
> + exit_zero_cnt * mul + 10, 8);
> +
> + hs_to_lp_switch = DIV_ROUND_UP(mipi_config->ths_trail + 2 * tlpx_ui, 8);
> +
> + intel_dsi->hs_to_lp_count = max(lp_to_hs_switch, hs_to_lp_switch);
> + intel_dsi->hs_to_lp_count += extra_byte_count;
> +
> + /* B088 */
> + /* LP -> HS for clock lanes
> + * LP clk sync + LP11 + LP01 + tclk_prepare + tclk_zero +
> + * extra byte count
> + * 2TPLX + 1TLPX + 1 TPLX(in ns) + prepare_cnt * 2 + clk_zero_cnt *
> + * 2(in UI) + extra byte count
> + * In byteclks = (4TLPX + prepare_cnt * 2 + clk_zero_cnt *2 (in UI)) /
> + * 8 + extra byte count
> + */
> + intel_dsi->clk_lp_to_hs_count =
> + DIV_ROUND_UP(
> + 4 * tlpx_ui + prepare_cnt * 2 +
> + clk_zero_cnt * 2,
> + 8);
> +
> + intel_dsi->clk_lp_to_hs_count += extra_byte_count;
> +
> + /* HS->LP for Clock Lanes
> + * Low Power clock synchronisations + 1Tx byteclk + tclk_trail +
> + * Extra byte count
> + * 2TLPX + 8UI + (trail_count*2)(in UI) + Extra byte count
> + * In byteclks = (2*TLpx(in UI) + trail_count*2 +8)(in UI)/8 +
> + * Extra byte count
> + */
> + intel_dsi->clk_hs_to_lp_count =
> + DIV_ROUND_UP(2 * tlpx_ui + trail_cnt * 2 + 8,
> + 8);
> + intel_dsi->clk_hs_to_lp_count += extra_byte_count;
> +
> + intel_dsi_log_params(intel_dsi);
> +}
> +
> void vlv_dsi_init(struct drm_i915_private *dev_priv)
> {
> struct drm_device *dev = &dev_priv->drm;
> @@ -1778,6 +1946,8 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
> goto err;
> }
>
> + vlv_dphy_param_init(intel_dsi);
> +
> /*
> * In case of BYT with CRC PMIC, we need to use GPIO for
> * Panel control.
> --
> 2.21.0
--
Ville Syrjälä
Intel
More information about the dri-devel
mailing list