[PATCH v4 11/15] drm/bridge: tc358767: Introduce tc_set_syspllparam()
Andrzej Hajda
a.hajda at samsung.com
Fri Jun 7 06:15:25 UTC 2019
On 07.06.2019 06:45, Andrey Smirnov wrote:
> Move common code converting clock rate to an appropriate constant and
> configuring SYS_PLLPARAM register into a separate routine and convert
> the rest of the code to use it. No functional change intended.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Reviewed-by: Andrzej Hajda <a.hajda at samsung.com>
--
Regards
Andrzej
> Cc: Archit Taneja <architt at codeaurora.org>
> Cc: Andrzej Hajda <a.hajda at samsung.com>
> Cc: Laurent Pinchart <Laurent.pinchart at ideasonboard.com>
> Cc: Tomi Valkeinen <tomi.valkeinen at ti.com>
> Cc: Andrey Gusakov <andrey.gusakov at cogentembedded.com>
> Cc: Philipp Zabel <p.zabel at pengutronix.de>
> Cc: Chris Healy <cphealy at gmail.com>
> Cc: Cory Tusar <cory.tusar at zii.aero>
> Cc: Lucas Stach <l.stach at pengutronix.de>
> Cc: dri-devel at lists.freedesktop.org
> Cc: linux-kernel at vger.kernel.org
> ---
> drivers/gpu/drm/bridge/tc358767.c | 46 +++++++++++--------------------
> 1 file changed, 16 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
> index 4bb9b15e1324..ac55b59249e3 100644
> --- a/drivers/gpu/drm/bridge/tc358767.c
> +++ b/drivers/gpu/drm/bridge/tc358767.c
> @@ -581,35 +581,40 @@ static int tc_stream_clock_calc(struct tc_data *tc)
> return regmap_write(tc->regmap, DP0_VIDMNGEN1, 32768);
> }
>
> -static int tc_aux_link_setup(struct tc_data *tc)
> +static int tc_set_syspllparam(struct tc_data *tc)
> {
> unsigned long rate;
> - u32 dp0_auxcfg1;
> - u32 value;
> - int ret;
> + u32 pllparam = SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
>
> rate = clk_get_rate(tc->refclk);
> switch (rate) {
> case 38400000:
> - value = REF_FREQ_38M4;
> + pllparam |= REF_FREQ_38M4;
> break;
> case 26000000:
> - value = REF_FREQ_26M;
> + pllparam |= REF_FREQ_26M;
> break;
> case 19200000:
> - value = REF_FREQ_19M2;
> + pllparam |= REF_FREQ_19M2;
> break;
> case 13000000:
> - value = REF_FREQ_13M;
> + pllparam |= REF_FREQ_13M;
> break;
> default:
> dev_err(tc->dev, "Invalid refclk rate: %lu Hz\n", rate);
> return -EINVAL;
> }
>
> + return regmap_write(tc->regmap, SYS_PLLPARAM, pllparam);
> +}
> +
> +static int tc_aux_link_setup(struct tc_data *tc)
> +{
> + int ret;
> + u32 dp0_auxcfg1;
> +
> /* Setup DP-PHY / PLL */
> - value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
> - ret = regmap_write(tc->regmap, SYS_PLLPARAM, value);
> + ret = tc_set_syspllparam(tc);
> if (ret)
> goto err;
>
> @@ -868,7 +873,6 @@ static int tc_main_link_enable(struct tc_data *tc)
> {
> struct drm_dp_aux *aux = &tc->aux;
> struct device *dev = tc->dev;
> - unsigned int rate;
> u32 dp_phy_ctrl;
> u32 value;
> int ret;
> @@ -896,25 +900,7 @@ static int tc_main_link_enable(struct tc_data *tc)
> if (ret)
> return ret;
>
> - rate = clk_get_rate(tc->refclk);
> - switch (rate) {
> - case 38400000:
> - value = REF_FREQ_38M4;
> - break;
> - case 26000000:
> - value = REF_FREQ_26M;
> - break;
> - case 19200000:
> - value = REF_FREQ_19M2;
> - break;
> - case 13000000:
> - value = REF_FREQ_13M;
> - break;
> - default:
> - return -EINVAL;
> - }
> - value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
> - ret = regmap_write(tc->regmap, SYS_PLLPARAM, value);
> + ret = tc_set_syspllparam(tc);
> if (ret)
> return ret;
>
More information about the dri-devel
mailing list