[PATCH] drm/stm: support runtime power management

Philippe CORNU philippe.cornu at st.com
Fri Jun 7 11:19:49 UTC 2019


Hi Yannick,

Thank you for your patch

Acked-by: Philippe Cornu <philippe.cornu at st.com>

Philippe :-)

On 6/3/19 10:32 AM, Yannick Fertré wrote:
> This patch enables runtime power management (runtime PM) support for
> the display controller. pm_runtime_enable() and pm_runtime_disable()
> are added during ltdc load and unload respectively.
> pm_runtime_get_sync() and pm_runtime_put_sync() are added for ltdc
> register access.
> 
> Signed-off-by: Yannick Fertré <yannick.fertre at st.com>
> ---
>   drivers/gpu/drm/stm/drv.c  | 43 +++++++++++++++++++++++------
>   drivers/gpu/drm/stm/ltdc.c | 67 +++++++++++++++++++++++++++++++++++-----------
>   2 files changed, 86 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/gpu/drm/stm/drv.c b/drivers/gpu/drm/stm/drv.c
> index 5834ef5..5659572 100644
> --- a/drivers/gpu/drm/stm/drv.c
> +++ b/drivers/gpu/drm/stm/drv.c
> @@ -12,6 +12,7 @@
>   #include <linux/dma-mapping.h>
>   #include <linux/module.h>
>   #include <linux/of_platform.h>
> +#include <linux/pm_runtime.h>
>   
>   #include <drm/drm_atomic.h>
>   #include <drm/drm_atomic_helper.h>
> @@ -135,14 +136,15 @@ static __maybe_unused int drv_suspend(struct device *dev)
>   	struct ltdc_device *ldev = ddev->dev_private;
>   	struct drm_atomic_state *state;
>   
> -	drm_kms_helper_poll_disable(ddev);
> +	if (WARN_ON(!ldev->suspend_state))
> +		return -ENOENT;
> +
>   	state = drm_atomic_helper_suspend(ddev);
> -	if (IS_ERR(state)) {
> -		drm_kms_helper_poll_enable(ddev);
> +	if (IS_ERR(state))
>   		return PTR_ERR(state);
> -	}
> +
>   	ldev->suspend_state = state;
> -	ltdc_suspend(ddev);
> +	pm_runtime_force_suspend(dev);
>   
>   	return 0;
>   }
> @@ -151,16 +153,41 @@ static __maybe_unused int drv_resume(struct device *dev)
>   {
>   	struct drm_device *ddev = dev_get_drvdata(dev);
>   	struct ltdc_device *ldev = ddev->dev_private;
> +	int ret;
>   
> -	ltdc_resume(ddev);
> -	drm_atomic_helper_resume(ddev, ldev->suspend_state);
> -	drm_kms_helper_poll_enable(ddev);
> +	pm_runtime_force_resume(dev);
> +	ret = drm_atomic_helper_resume(ddev, ldev->suspend_state);
> +	if (ret) {
> +		pm_runtime_force_suspend(dev);
> +		ldev->suspend_state = NULL;
> +		return ret;
> +	}
>   
>   	return 0;
>   }
>   
> +static __maybe_unused int drv_runtime_suspend(struct device *dev)
> +{
> +	struct drm_device *ddev = dev_get_drvdata(dev);
> +
> +	DRM_DEBUG_DRIVER("\n");
> +	ltdc_suspend(ddev);
> +
> +	return 0;
> +}
> +
> +static __maybe_unused int drv_runtime_resume(struct device *dev)
> +{
> +	struct drm_device *ddev = dev_get_drvdata(dev);
> +
> +	DRM_DEBUG_DRIVER("\n");
> +	return ltdc_resume(ddev);
> +}
> +
>   static const struct dev_pm_ops drv_pm_ops = {
>   	SET_SYSTEM_SLEEP_PM_OPS(drv_suspend, drv_resume)
> +	SET_RUNTIME_PM_OPS(drv_runtime_suspend,
> +			   drv_runtime_resume, NULL)
>   };
>   
>   static int stm_drm_platform_probe(struct platform_device *pdev)
> diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
> index ac29890..a40870b 100644
> --- a/drivers/gpu/drm/stm/ltdc.c
> +++ b/drivers/gpu/drm/stm/ltdc.c
> @@ -16,6 +16,7 @@
>   #include <linux/of_address.h>
>   #include <linux/of_graph.h>
>   #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
>   #include <linux/reset.h>
>   
>   #include <drm/drm_atomic.h>
> @@ -444,6 +445,7 @@ static void ltdc_crtc_atomic_disable(struct drm_crtc *crtc,
>   				     struct drm_crtc_state *old_state)
>   {
>   	struct ltdc_device *ldev = crtc_to_ltdc(crtc);
> +	struct drm_device *ddev = crtc->dev;
>   
>   	DRM_DEBUG_DRIVER("\n");
>   
> @@ -457,6 +459,8 @@ static void ltdc_crtc_atomic_disable(struct drm_crtc *crtc,
>   
>   	/* immediately commit disable of layers before switching off LTDC */
>   	reg_set(ldev->regs, LTDC_SRCR, SRCR_IMR);
> +
> +	pm_runtime_put_sync(ddev->dev);
>   }
>   
>   #define CLK_TOLERANCE_HZ 50
> @@ -505,17 +509,31 @@ static bool ltdc_crtc_mode_fixup(struct drm_crtc *crtc,
>   				 struct drm_display_mode *adjusted_mode)
>   {
>   	struct ltdc_device *ldev = crtc_to_ltdc(crtc);
> +	struct drm_device *ddev = crtc->dev;
>   	int rate = mode->clock * 1000;
> +	bool runtime_active;
> +	int ret;
> +
> +	runtime_active = pm_runtime_active(ddev->dev);
> +
> +	if (runtime_active)
> +		pm_runtime_put_sync(ddev->dev);
>   
> -	clk_disable(ldev->pixel_clk);
>   	if (clk_set_rate(ldev->pixel_clk, rate) < 0) {
>   		DRM_ERROR("Cannot set rate (%dHz) for pixel clk\n", rate);
>   		return false;
>   	}
> -	clk_enable(ldev->pixel_clk);
>   
>   	adjusted_mode->clock = clk_get_rate(ldev->pixel_clk) / 1000;
>   
> +	if (runtime_active) {
> +		ret = pm_runtime_get_sync(ddev->dev);
> +		if (ret) {
> +			DRM_ERROR("Failed to fixup mode, cannot get sync\n");
> +			return false;
> +		}
> +	}
> +
>   	DRM_DEBUG_DRIVER("requested clock %dkHz, adjusted clock %dkHz\n",
>   			 mode->clock, adjusted_mode->clock);
>   
> @@ -525,11 +543,21 @@ static bool ltdc_crtc_mode_fixup(struct drm_crtc *crtc,
>   static void ltdc_crtc_mode_set_nofb(struct drm_crtc *crtc)
>   {
>   	struct ltdc_device *ldev = crtc_to_ltdc(crtc);
> +	struct drm_device *ddev = crtc->dev;
>   	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
>   	struct videomode vm;
>   	u32 hsync, vsync, accum_hbp, accum_vbp, accum_act_w, accum_act_h;
>   	u32 total_width, total_height;
>   	u32 val;
> +	int ret;
> +
> +	if (!pm_runtime_active(ddev->dev)) {
> +		ret = pm_runtime_get_sync(ddev->dev);
> +		if (ret) {
> +			DRM_ERROR("Failed to set mode, cannot get sync\n");
> +			return;
> +		}
> +	}
>   
>   	drm_display_mode_to_videomode(mode, &vm);
>   
> @@ -590,6 +618,7 @@ static void ltdc_crtc_atomic_flush(struct drm_crtc *crtc,
>   				   struct drm_crtc_state *old_crtc_state)
>   {
>   	struct ltdc_device *ldev = crtc_to_ltdc(crtc);
> +	struct drm_device *ddev = crtc->dev;
>   	struct drm_pending_vblank_event *event = crtc->state->event;
>   
>   	DRM_DEBUG_ATOMIC("\n");
> @@ -602,12 +631,12 @@ static void ltdc_crtc_atomic_flush(struct drm_crtc *crtc,
>   	if (event) {
>   		crtc->state->event = NULL;
>   
> -		spin_lock_irq(&crtc->dev->event_lock);
> +		spin_lock_irq(&ddev->event_lock);
>   		if (drm_crtc_vblank_get(crtc) == 0)
>   			drm_crtc_arm_vblank_event(crtc, event);
>   		else
>   			drm_crtc_send_vblank_event(crtc, event);
> -		spin_unlock_irq(&crtc->dev->event_lock);
> +		spin_unlock_irq(&ddev->event_lock);
>   	}
>   }
>   
> @@ -663,15 +692,19 @@ bool ltdc_crtc_scanoutpos(struct drm_device *ddev, unsigned int pipe,
>   	 * Computation for the two first cases are identical so we can
>   	 * simplify the code and only test if line > vactive_end
>   	 */
> -	line = reg_read(ldev->regs, LTDC_CPSR) & CPSR_CYPOS;
> -	vactive_start = reg_read(ldev->regs, LTDC_BPCR) & BPCR_AVBP;
> -	vactive_end = reg_read(ldev->regs, LTDC_AWCR) & AWCR_AAH;
> -	vtotal = reg_read(ldev->regs, LTDC_TWCR) & TWCR_TOTALH;
> -
> -	if (line > vactive_end)
> -		*vpos = line - vtotal - vactive_start;
> -	else
> -		*vpos = line - vactive_start;
> +	if (pm_runtime_active(ddev->dev)) {
> +		line = reg_read(ldev->regs, LTDC_CPSR) & CPSR_CYPOS;
> +		vactive_start = reg_read(ldev->regs, LTDC_BPCR) & BPCR_AVBP;
> +		vactive_end = reg_read(ldev->regs, LTDC_AWCR) & AWCR_AAH;
> +		vtotal = reg_read(ldev->regs, LTDC_TWCR) & TWCR_TOTALH;
> +
> +		if (line > vactive_end)
> +			*vpos = line - vtotal - vactive_start;
> +		else
> +			*vpos = line - vactive_start;
> +	} else {
> +		*vpos = 0;
> +	}
>   
>   	*hpos = 0;
>   
> @@ -1243,8 +1276,11 @@ int ltdc_load(struct drm_device *ddev)
>   	/* Allow usage of vblank without having to call drm_irq_install */
>   	ddev->irq_enabled = 1;
>   
> -	return 0;
> +	clk_disable_unprepare(ldev->pixel_clk);
> +
> +	pm_runtime_enable(ddev->dev);
>   
> +	return 0;
>   err:
>   	for (i = 0; i < MAX_ENDPOINTS; i++)
>   		drm_panel_bridge_remove(bridge[i]);
> @@ -1256,7 +1292,6 @@ int ltdc_load(struct drm_device *ddev)
>   
>   void ltdc_unload(struct drm_device *ddev)
>   {
> -	struct ltdc_device *ldev = ddev->dev_private;
>   	int i;
>   
>   	DRM_DEBUG_DRIVER("\n");
> @@ -1264,7 +1299,7 @@ void ltdc_unload(struct drm_device *ddev)
>   	for (i = 0; i < MAX_ENDPOINTS; i++)
>   		drm_of_panel_bridge_remove(ddev->dev->of_node, 0, i);
>   
> -	clk_disable_unprepare(ldev->pixel_clk);
> +	pm_runtime_disable(ddev->dev);
>   }
>   
>   MODULE_AUTHOR("Philippe Cornu <philippe.cornu at st.com>");
> 


More information about the dri-devel mailing list