[PATCH 18/20] drm: rcar-du: group: Enable DU's CMM extension

[Laurent Pinchart]

Hi Jacopo,

Thank you for the patch.

On Thu, Jun 06, 2019 at 04:22:18PM +0200, Jacopo Mondi wrote:
> Enable the CMM units through the display unit extensional function control
> group register DEFR7.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas at jmondi.org>
> ---
>  drivers/gpu/drm/rcar-du/rcar_du_group.c | 8 ++++++++
>  drivers/gpu/drm/rcar-du/rcar_du_regs.h  | 5 +++++
>  2 files changed, 13 insertions(+)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.c b/drivers/gpu/drm/rcar-du/rcar_du_group.c
> index 9eee47969e77..d252c9bb9809 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_group.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_group.c
> @@ -147,6 +147,14 @@ static void rcar_du_group_setup(struct rcar_du_group *rgrp)
>  
>  	rcar_du_group_setup_pins(rgrp);
>  
> +	if (rcar_du_has(rcdu, RCAR_DU_FEATURE_CMM)) {

This is a good enough reason to keep RCAR_DU_FEATURE_CMM :-/

> +		u32 defr7 = DEFR7_CODE |
> +			    (rgrp->cmms_mask & BIT(1) ? DEFR7_CMME1 : 0) |
> +			    (rgrp->cmms_mask & BIT(0) ? DEFR7_CMME0 : 0);
> +
> +		rcar_du_group_write(rgrp, DEFR7, defr7);

It would be nice to disable the CMM when the LUT isn't used, but that
would be difficult at the moment. We can revisit this when Kieran's DU
group handling series will land.

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> +	}
> +
>  	if (rcdu->info->gen >= 2) {
>  		rcar_du_group_setup_defr8(rgrp);
>  		rcar_du_group_setup_didsr(rgrp);
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_regs.h b/drivers/gpu/drm/rcar-du/rcar_du_regs.h
> index bc87f080b170..fb9964949368 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_regs.h
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_regs.h
> @@ -197,6 +197,11 @@
>  #define DEFR6_MLOS1		(1 << 2)
>  #define DEFR6_DEFAULT		(DEFR6_CODE | DEFR6_TCNE1)
>  
> +#define DEFR7			0x000ec
> +#define DEFR7_CODE		(0x7779 << 16)
> +#define DEFR7_CMME1		BIT(6)
> +#define DEFR7_CMME0		BIT(4)
> +
>  /* -----------------------------------------------------------------------------
>   * R8A7790-only Control Registers
>   */

-- 
Regards,

Laurent Pinchart