[PATCH v3 04/10] dt-bindings: display: renesas: lvds: Add renesas,companion property

[Kieran Bingham]

Hi Laurent,

On 28/05/2019 15:12, Laurent Pinchart wrote:
> Add a new optional renesas,companion property to point to the companion
> LVDS encoder. This is used to support dual-link operation where the main
> LVDS encoder splits even-numbered and odd-numbered pixels between the
> two LVDS encoders.
> 
> The new property doesn't control the mode of operation, it only
> describes the relationship between the master and companion LVDS
> encoders.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> Reviewed-by: Jacopo Mondi <jacopo at jmondi.org>
> Tested-by: Jacopo Mondi <jacopo+renesas at jmondi.org>
> ---
> Changes since v2:
> 
> - Clarify when the companion property is required or not allowed
> 
> Changes since v1:
> 
> - Fixed typo
> ---
>  .../devicetree/bindings/display/bridge/renesas,lvds.txt    | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
> index 900a884ad9f5..2d24bd8cbec5 100644
> --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
> +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
> @@ -45,6 +45,13 @@ OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
>  
>  Each port shall have a single endpoint.
>  
> +Optional properties:
> +> +- renesas,companion : phandle to the companion LVDS encoder. This
property is
> +  mandatory for the first LVDS encoder on D3 and E3 SoCs, and shall point to
> +  the second encoder to be used as a companion in dual-link mode. It shall not
> +  be set for any other LVDS encoder.
> +

I see Sam has already asked for an updated example, so with that:

I'm fine with the text above.

Reviewed-by: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>

>  
>  Example:
>  
> 

-- 
Regards
--
Kieran