[PATCH v3 0/5] drm/panel-simple: Add panel parameters for ortustech-com37h3m05dtc/99dtc and sharp-lq070y3dg3b

[H. Nikolaus Schaller]

V3:
* add bindings documentation (suggested by sam at ravnborg.org)

V2 2019-06-05 07:07:05:
* fix typo in 99dtc panel compatible string (reported by imirkin at alum.mit.edu)

V1 2019-06-04 14:53:00:

Since v5.2-rc1 OMAP is no longer using a special display driver architecture
for DPI panels, but uses the general drm/panel/panel-simple.

So we finally can add SoC independent panel definitions for two panel models
which we already had worked on quite a while ago (before device tree was
introduced):

	https://patchwork.kernel.org/patch/2851295/



H. Nikolaus Schaller (5):
  drm/panel: simple: Add Sharp LQ070Y3DG3B panel support
  drm/panel: simple: Add Ortustech COM37H3M panel support
  dt-bindings: drm/panel: simple: add ortustech,com37h3m05dtc panel
  dt-bindings: drm/panel: simple: add ortustech,com37h3m99dtc panel
  dt-bindings: drm/panel: simple: add sharp,lq070y3dg3b panel

 .../display/panel/ortustech,com37h3m05dtc.txt | 12 ++++
 .../display/panel/ortustech,com37h3m99dtc.txt | 12 ++++
 .../display/panel/sharp,lq070y3dg3b.txt       | 12 ++++
 drivers/gpu/drm/panel/panel-simple.c          | 63 +++++++++++++++++++
 4 files changed, 99 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt
 create mode 100644 Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt
 create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt

-- 
2.19.1