[GIT PULL FOR v5.3] R-Car DU changes, v2

[Daniel Vetter]

On Sat, Jun 08, 2019 at 04:46:52PM +0300, Laurent Pinchart wrote:
> Hi Dave,
> 
> If you haven't pulled the previous pull request yet, please disregard it
> and process this one instead. It contains additional patches that add
> support for more plane formats.
> 
> The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9:
> 
>   Linux 5.2-rc1 (2019-05-19 15:47:09 -0700)
> 
> are available in the Git repository at:
> 
>   git://linuxtv.org/pinchartl/media.git tags/du-next-20190608-2
> 
> for you to fetch changes up to cb5f15b711d3ace7b29369657487f1281a4a5eac:
> 
>   drm: rcar-du: Add support for missing 16-bit RGB1555 formats (2019-06-08 16:36:41 +0300)
> 
> ----------------------------------------------------------------
> R-Car DU changes for v5.3:
> 
> - R8A774A1 SoC support
> - LVDS dual-link mode support
> - Support for additional formats
> - Misc fixes

I wasn't quite sure whether this has enough dt-acks, but I guess one r-b
from Rob on the main dt patch should be enough. And everything else looks
very neatly reviewed!

Thanks, pulled.
-Daniel

> 
> ----------------------------------------------------------------
> Biju Das (4):
>       dt-bindings: display: renesas: du: Document the r8a774a1 bindings
>       dt-bindings: display: renesas: lvds: Document r8a774a1 bindings
>       drm: rcar-du: Add R8A774A1 support
>       drm: rcar-du: lvds: Add r8a774a1 support
> 
> Kieran Bingham (1):
>       drm: rcar-du: writeback: include interface header
> 
> Laurent Pinchart (10):
>       drm: bridge: Add dual_link field to the drm_bridge_timings structure
>       dt-bindings: display: bridge: thc63lvd1024: Document dual-link operation
>       drm: bridge: thc63: Report input bus mode through bridge timings
>       dt-bindings: display: renesas: lvds: Add renesas,companion property
>       drm: rcar-du: lvds: Remove LVDS double-enable checks
>       drm: rcar-du: lvds: Add support for dual-link mode
>       drm: rcar-du: Skip LVDS1 output on Gen3 when using dual-link LVDS mode
>       drm: rcar-du: Add support for missing 32-bit RGB formats
>       drm: rcar-du: Add support for missing 16-bit RGB4444 formats
>       drm: rcar-du: Add support for missing 16-bit RGB1555 formats
> 
>  .../bindings/display/bridge/renesas,lvds.txt       |  19 ++-
>  .../bindings/display/bridge/thine,thc63lvd1024.txt |   6 +
>  .../devicetree/bindings/display/renesas,du.txt     |   2 +
>  drivers/gpu/drm/bridge/thc63lvd1024.c              |  54 +++++++--
>  drivers/gpu/drm/rcar-du/rcar_du_drv.c              |  30 +++++
>  drivers/gpu/drm/rcar-du/rcar_du_encoder.c          |  12 ++
>  drivers/gpu/drm/rcar-du/rcar_du_kms.c              |  82 ++++++++++++-
>  drivers/gpu/drm/rcar-du/rcar_du_writeback.c        |   1 +
>  drivers/gpu/drm/rcar-du/rcar_lvds.c                | 127 +++++++++++++++------
>  drivers/gpu/drm/rcar-du/rcar_lvds.h                |   5 +
>  include/drm/drm_bridge.h                           |   8 ++
>  11 files changed, 298 insertions(+), 48 deletions(-)
> 
> -- 
> Regards,
> 
> Laurent Pinchart
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch