[1/2] dt-bindngs: display: panel: Add BOE tv101wum-nl6 panel bindings

[Rob Herring]

On Sat, Jun 08, 2019 at 03:02:29PM +0800, Jitao Shi wrote:
> Add documentation for boe tv101wum-n16 panel.

Typo in the subject and checkpatch complains about trailing whitespace.

> 
> Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
> ---
>  .../display/panel/boe,tv101wum-nl6.txt        | 34 +++++++++++++++++++
>  1 file changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
> new file mode 100644
> index 000000000000..2a84735d742d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
> @@ -0,0 +1,34 @@
> +Boe Corporation 10.1" WUXGA TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "boe,tv101wum"
> +- reg: the virtual channel number of a DSI peripheral
> +- enable-gpios: a GPIO spec for the enable pin
> +- pp1800-supply: core voltage supply
> +- avdd-supply: 
> +- avee-supply: 
> +- backlight: phandle of the backlight device attached to the panel
> +
> +The device node can contain one 'port' child node with one child
> +'endpoint' node, according to the bindings defined in
> +media/video-interfaces.txt. This node should describe panel's video bus.
> +
> +Example:
> +&dsi {
> +	...
> +	panel at 0 {
> +		compatible = "boe,tv101wum-nl6";
> +		reg = <0>;
> +		enable-gpios = <&pio 45 0>;
> +		avdd-supply = <&ppvarn_lcd>;
> +		avee-supply = <&ppvarp_lcd>;
> +		pp1800-supply = <&pp1800_lcd>;
> +		backlight = <&backlight_lcd0>;
> +		status = "okay";
> +		port {
> +			panel_in: endpoint {
> +				remote-endpoint = <&dsi_out>;
> +			};
> +		};
> +	};
> +};
> \ No newline at end of file

Fix this.