[PATCH v3 01/10] media: vsp1: drm: Split vsp1_du_setup_lif()
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Tue Jun 18 13:46:08 UTC 2019
Hi Ulrich,
On Tue, Jun 18, 2019 at 02:32:13PM +0200, Ulrich Hecht wrote:
> > On June 17, 2019 at 11:09 PM Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com> wrote:
> >
> > From: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
> >
> > Break vsp1_du_setup_lif() into components more suited to the DRM Atomic
> > API. The existing vsp1_du_setup_lif() API call is maintained as it is
> > still used from the DU.
> >
> > Signed-off-by: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
> > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> > ---
> > Changes since v2:
> >
> > - Minor formatting changes
> > - Fix NULL pointer dereference in vsp1_du_setup_lif()
> > ---
> > drivers/media/platform/vsp1/vsp1_drm.c | 220 ++++++++++++++++++-------
> > include/media/vsp1.h | 32 +++-
> > 2 files changed, 189 insertions(+), 63 deletions(-)
> >
> > diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
> > index a4a45d68a6ef..7957e1439de0 100644
> > --- a/drivers/media/platform/vsp1/vsp1_drm.c
> > +++ b/drivers/media/platform/vsp1/vsp1_drm.c
> > @@ -616,10 +616,10 @@ int vsp1_du_init(struct device *dev)
> > EXPORT_SYMBOL_GPL(vsp1_du_init);
> >
> > /**
> > - * vsp1_du_setup_lif - Setup the output part of the VSP pipeline
> > + * vsp1_du_atomic_modeset - Configure the mode as part of an atomic update
> > * @dev: the VSP device
> > * @pipe_index: the DRM pipeline index
> > - * @cfg: the LIF configuration
> > + * @cfg: the mode configuration
> > *
> > * Configure the output part of VSP DRM pipeline for the given frame @cfg.width
> > * and @cfg.height. This sets up formats on the BRx source pad, the WPF sink and
> > @@ -636,14 +636,12 @@ EXPORT_SYMBOL_GPL(vsp1_du_init);
> > *
> > * Return 0 on success or a negative error code on failure.
> > */
> > -int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
> > - const struct vsp1_du_lif_config *cfg)
> > +int vsp1_du_atomic_modeset(struct device *dev, unsigned int pipe_index,
> > + const struct vsp1_du_modeset_config *cfg)
> > {
> > struct vsp1_device *vsp1 = dev_get_drvdata(dev);
> > struct vsp1_drm_pipeline *drm_pipe;
> > struct vsp1_pipeline *pipe;
> > - unsigned long flags;
> > - unsigned int i;
> > int ret;
> >
> > if (pipe_index >= vsp1->info->lif_count)
> > @@ -652,60 +650,6 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
> > drm_pipe = &vsp1->drm->pipe[pipe_index];
> > pipe = &drm_pipe->pipe;
> >
> > - if (!cfg) {
> > - struct vsp1_brx *brx;
> > -
> > - mutex_lock(&vsp1->drm->lock);
> > -
> > - brx = to_brx(&pipe->brx->subdev);
> > -
> > - /*
> > - * NULL configuration means the CRTC is being disabled, stop
> > - * the pipeline and turn the light off.
> > - */
> > - ret = vsp1_pipeline_stop(pipe);
> > - if (ret == -ETIMEDOUT)
> > - dev_err(vsp1->dev, "DRM pipeline stop timeout\n");
> > -
> > - for (i = 0; i < ARRAY_SIZE(pipe->inputs); ++i) {
> > - struct vsp1_rwpf *rpf = pipe->inputs[i];
> > -
> > - if (!rpf)
> > - continue;
> > -
> > - /*
> > - * Remove the RPF from the pipe and the list of BRx
> > - * inputs.
> > - */
> > - WARN_ON(!rpf->entity.pipe);
> > - rpf->entity.pipe = NULL;
> > - list_del(&rpf->entity.list_pipe);
> > - pipe->inputs[i] = NULL;
> > -
> > - brx->inputs[rpf->brx_input].rpf = NULL;
> > - }
> > -
> > - drm_pipe->du_complete = NULL;
> > - pipe->num_inputs = 0;
> > -
> > - dev_dbg(vsp1->dev, "%s: pipe %u: releasing %s\n",
> > - __func__, pipe->lif->index,
> > - BRX_NAME(pipe->brx));
> > -
> > - list_del(&pipe->brx->list_pipe);
> > - pipe->brx->pipe = NULL;
> > - pipe->brx = NULL;
> > -
> > - mutex_unlock(&vsp1->drm->lock);
> > -
> > - vsp1_dlm_reset(pipe->output->dlm);
> > - vsp1_device_put(vsp1);
> > -
> > - dev_dbg(vsp1->dev, "%s: pipeline disabled\n", __func__);
> > -
> > - return 0;
> > - }
> > -
> > drm_pipe->width = cfg->width;
> > drm_pipe->height = cfg->height;
> > pipe->interlaced = cfg->interlaced;
> > @@ -722,8 +666,43 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
> > goto unlock;
> >
> > ret = vsp1_du_pipeline_setup_output(vsp1, pipe);
> > - if (ret < 0)
> > - goto unlock;
> > +
> > +unlock:
> > + mutex_unlock(&vsp1->drm->lock);
> > +
> > + return ret;
> > +}
> > +
> > +/**
> > + * vsp1_du_atomic_enable - Enable and start a DU pipeline
> > + * @dev: the VSP device
> > + * @pipe_index: the DRM pipeline index
> > + * @cfg: the enablement configuration
> > + *
> > + * The @pipe_index argument selects which DRM pipeline to enable. The number of
> > + * available pipelines depend on the VSP instance.
>
> "depends".
>
> > + *
> > + * The configuration passes a callback function to register notification of
> > + * frame completion events.
> > + *
> > + * Return 0 on success or a negative error code on failure.
> > + */
> > +int vsp1_du_atomic_enable(struct device *dev, unsigned int pipe_index,
> > + const struct vsp1_du_enable_config *cfg)
> > +{
> > + struct vsp1_device *vsp1 = dev_get_drvdata(dev);
> > + struct vsp1_drm_pipeline *drm_pipe;
> > + struct vsp1_pipeline *pipe;
> > + unsigned long flags;
> > + int ret;
> > +
> > + if (pipe_index >= vsp1->info->lif_count)
> > + return -EINVAL;
> > +
> > + drm_pipe = &vsp1->drm->pipe[pipe_index];
> > + pipe = &drm_pipe->pipe;
> > +
> > + mutex_lock(&vsp1->drm->lock);
> >
> > /* Enable the VSP1. */
> > ret = vsp1_device_get(vsp1);
> > @@ -758,6 +737,123 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
> > dev_dbg(vsp1->dev, "%s: pipeline enabled\n", __func__);
> >
> > return 0;
> > +
> > +}
> > +EXPORT_SYMBOL_GPL(vsp1_du_atomic_enable);
> > +
> > +/**
> > + * vsp1_du_atomic_disable - Disable and stop a DU pipeline
> > + * @dev: the VSP device
> > + * @pipe_index: the DRM pipeline index
> > + *
> > + * The @pipe_index argument selects which DRM pipeline to disable. The number
> > + * of available pipelines depend on the VSP instance.
> > + *
> > + * Return 0 on success or a negative error code on failure.
> > + */
> > +int vsp1_du_atomic_disable(struct device *dev, unsigned int pipe_index)
> > +{
> > + struct vsp1_device *vsp1 = dev_get_drvdata(dev);
> > + struct vsp1_drm_pipeline *drm_pipe;
> > + struct vsp1_pipeline *pipe;
> > + struct vsp1_brx *brx;
> > + unsigned int i;
> > + int ret;
> > +
> > + if (pipe_index >= vsp1->info->lif_count)
> > + return -EINVAL;
> > +
> > + drm_pipe = &vsp1->drm->pipe[pipe_index];
> > + pipe = &drm_pipe->pipe;
> > +
> > + mutex_lock(&vsp1->drm->lock);
> > +
> > + brx = to_brx(&pipe->brx->subdev);
> > +
> > + /* Stop the pipeline and turn the light off. */
>
> I may have missed something, but it is not clear to me what "light" refers to here.
It's a metaphor, meaning disable everything :-)
> > + ret = vsp1_pipeline_stop(pipe);
> > + if (ret == -ETIMEDOUT)
> > + dev_err(vsp1->dev, "DRM pipeline stop timeout\n");
> > +
> > + for (i = 0; i < ARRAY_SIZE(pipe->inputs); ++i) {
> > + struct vsp1_rwpf *rpf = pipe->inputs[i];
> > +
> > + if (!rpf)
> > + continue;
> > +
> > + /* Remove the RPF from the pipe and the list of BRx inputs. */
> > + WARN_ON(!rpf->entity.pipe);
> > + rpf->entity.pipe = NULL;
> > + list_del(&rpf->entity.list_pipe);
> > + pipe->inputs[i] = NULL;
> > +
> > + brx->inputs[rpf->brx_input].rpf = NULL;
> > + }
> > +
> > + drm_pipe->du_complete = NULL;
> > + pipe->num_inputs = 0;
> > +
> > + dev_dbg(vsp1->dev, "%s: pipe %u: releasing %s\n", __func__,
> > + pipe->lif->index, BRX_NAME(pipe->brx));
> > +
> > + list_del(&pipe->brx->list_pipe);
> > + pipe->brx->pipe = NULL;
> > + pipe->brx = NULL;
> > +
> > + mutex_unlock(&vsp1->drm->lock);
> > +
> > + vsp1_dlm_reset(pipe->output->dlm);
> > + vsp1_device_put(vsp1);
> > +
> > + dev_dbg(vsp1->dev, "%s: pipeline disabled\n", __func__);
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(vsp1_du_atomic_disable);
> > +
> > +/**
> > + * vsp1_du_setup_lif - Setup the output part of the VSP pipeline
> > + * @dev: the VSP device
> > + * @pipe_index: the DRM pipeline index
> > + * @cfg: the LIF configuration
> > + *
> > + * Configure the output part of VSP DRM pipeline for the given frame @cfg.width
> > + * and @cfg.height. This sets up formats on the BRx source pad, the WPF sink and
> > + * source pads, and the LIF sink pad.
> > + *
> > + * The @pipe_index argument selects which DRM pipeline to setup. The number of
> > + * available pipelines depend on the VSP instance.
> > + *
> > + * As the media bus code on the blend unit source pad is conditioned by the
> > + * configuration of its sink 0 pad, we also set up the formats on all blend unit
> > + * sinks, even if the configuration will be overwritten later by
> > + * vsp1_du_setup_rpf(). This ensures that the blend unit configuration is set to
> > + * a well defined state.
> > + *
> > + * Return 0 on success or a negative error code on failure.
> > + */
> > +int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
> > + const struct vsp1_du_lif_config *cfg)
> > +{
> > + struct vsp1_du_modeset_config modes;
> > + struct vsp1_du_enable_config enable;
> > + int ret;
> > +
> > + if (!cfg)
> > + return vsp1_du_atomic_disable(dev, pipe_index);
> > +
> > + modes.width = cfg->width;
> > + modes.height = cfg->height;
> > + modes.interlaced = cfg->interlaced;
> > +
> > + ret = vsp1_du_atomic_modeset(dev, pipe_index, &modes);
> > + if (ret)
> > + return ret;
> > +
> > + enable.callback = cfg->callback;
> > + enable.callback_data = cfg->callback_data;
> > +
> > + return vsp1_du_atomic_enable(dev, pipe_index, &enable);
> > }
> > EXPORT_SYMBOL_GPL(vsp1_du_setup_lif);
> >
> > diff --git a/include/media/vsp1.h b/include/media/vsp1.h
> > index cc1b0d42ce95..56643f97d4c9 100644
> > --- a/include/media/vsp1.h
> > +++ b/include/media/vsp1.h
> > @@ -21,7 +21,7 @@ int vsp1_du_init(struct device *dev);
> > #define VSP1_DU_STATUS_WRITEBACK BIT(1)
> >
> > /**
> > - * struct vsp1_du_lif_config - VSP LIF configuration
> > + * struct vsp1_du_lif_config - VSP LIF configuration - Deprecated
> > * @width: output frame width
> > * @height: output frame height
> > * @interlaced: true for interlaced pipelines
> > @@ -42,6 +42,30 @@ struct vsp1_du_lif_config {
> > int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
> > const struct vsp1_du_lif_config *cfg);
> >
> > +/**
> > + * struct vsp1_du_modeset_config - VSP display mode configuration
> > + * @width: output frame width
> > + * @height: output frame height
> > + * @interlaced: true for interlaced pipelines
> > + */
> > +struct vsp1_du_modeset_config {
> > + unsigned int width;
> > + unsigned int height;
> > + bool interlaced;
> > +};
> > +
> > +/**
> > + * struct vsp1_du_enable_config - VSP enable configuration
> > + * @callback: frame completion callback function (optional). When a callback
> > + * is provided, the VSP driver guarantees that it will be called once
> > + * and only once for each vsp1_du_atomic_flush() call.
> > + * @callback_data: data to be passed to the frame completion callback
> > + */
> > +struct vsp1_du_enable_config {
> > + void (*callback)(void *data, unsigned int status, u32 crc);
> > + void *callback_data;
> > +};
> > +
> > /**
> > * struct vsp1_du_atomic_config - VSP atomic configuration parameters
> > * @pixelformat: plane pixel format (V4L2 4CC)
> > @@ -106,6 +130,12 @@ struct vsp1_du_atomic_pipe_config {
> > struct vsp1_du_writeback_config writeback;
> > };
> >
> > +
> > +int vsp1_du_atomic_modeset(struct device *dev, unsigned int pipe_index,
> > + const struct vsp1_du_modeset_config *cfg);
> > +int vsp1_du_atomic_enable(struct device *dev, unsigned int pipe_index,
> > + const struct vsp1_du_enable_config *cfg);
> > +int vsp1_du_atomic_disable(struct device *dev, unsigned int pipe_index);
> > void vsp1_du_atomic_begin(struct device *dev, unsigned int pipe_index);
> > int vsp1_du_atomic_update(struct device *dev, unsigned int pipe_index,
> > unsigned int rpf,
>
> With those minor issues fixed:
>
> Reviewed-by: Ulrich Hecht <uli+renesas at fpond.eu>
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list