[PATCH v5 07/12] drm/modes: Allow to specify rotation and reflection on the commandline
Noralf Trønnes
noralf at tronnes.org
Tue Jun 18 17:47:04 UTC 2019
Den 17.06.2019 16.51, skrev Maxime Ripard:
> Rotations and reflections setup are needed in some scenarios to initialise
> properly the initial framebuffer. Some drivers already had a bunch of
> quirks to deal with this, such as either a private kernel command line
> parameter (omapdss) or on the device tree (various panels).
>
> In order to accomodate this, let's create a video mode parameter to deal
> with the rotation and reflexion.
>
> Signed-off-by: Maxime Ripard <maxime.ripard at bootlin.com>
> ---
> Documentation/fb/modedb.rst | 11 +++-
> drivers/gpu/drm/drm_client_modeset.c | 30 +++++++-
> drivers/gpu/drm/drm_modes.c | 114 +++++++++++++++++++++++-----
> include/drm/drm_connector.h | 10 ++-
> 4 files changed, 145 insertions(+), 20 deletions(-)
>
> diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
> index 3c2397293977..3e8a6f79dcd7 100644
> --- a/Documentation/fb/modedb.rst
> +++ b/Documentation/fb/modedb.rst
> @@ -53,6 +53,17 @@ Specifying the option multiple times for different ports is possible, e.g.::
>
> video=LVDS-1:d video=HDMI-1:D
>
> +Options can also be passed after the mode, using commas as separator.
> +
> + Sample usage: 720x480,rotate=180 - 720x480 mode, rotated by 180 degrees
> +
> +Valid options are:
> +
> + - reflect_x (boolean): Perform an axial symetry on the X axis
> + - reflect_y (boolean): Perform an axial symetry on the Y axis
2x s/symetry/symmetry/
Reviewed-by: Noralf Trønnes <noralf at tronnes.org>
> + - rotate (integer): Rotate the initial framebuffer by x
> + degrees. Valid values are 0, 90, 180 and 270.
> +
> -----------------------------------------------------------------------------
>
> What is the VESA(TM) Coordinated Video Timings (CVT)?
> diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
> index 33d4988f22ae..e95fceac8f8b 100644
> --- a/drivers/gpu/drm/drm_client_modeset.c
> +++ b/drivers/gpu/drm/drm_client_modeset.c
> @@ -824,6 +824,7 @@ bool drm_client_rotation(struct drm_mode_set *modeset, unsigned int *rotation)
> {
> struct drm_connector *connector = modeset->connectors[0];
> struct drm_plane *plane = modeset->crtc->primary;
> + struct drm_cmdline_mode *cmdline;
> u64 valid_mask = 0;
> unsigned int i;
>
> @@ -844,6 +845,35 @@ bool drm_client_rotation(struct drm_mode_set *modeset, unsigned int *rotation)
> *rotation = DRM_MODE_ROTATE_0;
> }
>
> + /**
> + * The panel already defined the default rotation
> + * through its orientation. Whatever has been provided
> + * on the command line needs to be added to that.
> + *
> + * Unfortunately, the rotations are at different bit
> + * indices, so the math to add them up are not as
> + * trivial as they could.
> + *
> + * Reflections on the other hand are pretty trivial to deal with, a
> + * simple XOR between the two handle the addition nicely.
> + */
> + cmdline = &connector->cmdline_mode;
> + if (cmdline->specified) {
> + unsigned int cmdline_rest, panel_rest;
> + unsigned int cmdline_rot, panel_rot;
> + unsigned int sum_rot, sum_rest;
> +
> + panel_rot = ilog2(*rotation & DRM_MODE_ROTATE_MASK);
> + cmdline_rot = ilog2(cmdline->rotation_reflection & DRM_MODE_ROTATE_MASK);
> + sum_rot = (panel_rot + cmdline_rot) % 4;
> +
> + panel_rest = *rotation & ~DRM_MODE_ROTATE_MASK;
> + cmdline_rest = cmdline->rotation_reflection & ~DRM_MODE_ROTATE_MASK;
> + sum_rest = panel_rest ^ cmdline_rest;
> +
> + *rotation = (1 << sum_rot) | sum_rest;
> + }
> +
> /*
> * TODO: support 90 / 270 degree hardware rotation,
> * depending on the hardware this may require the framebuffer
> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> index 429d3be17800..dc6d11292685 100644
> --- a/drivers/gpu/drm/drm_modes.c
> +++ b/drivers/gpu/drm/drm_modes.c
> @@ -1554,6 +1554,71 @@ static int drm_mode_parse_cmdline_res_mode(const char *str, unsigned int length,
> return 0;
> }
>
> +static int drm_mode_parse_cmdline_options(char *str, size_t len,
> + struct drm_connector *connector,
> + struct drm_cmdline_mode *mode)
> +{
> + unsigned int rotation = 0;
> + char *sep = str;
> +
> + while ((sep = strchr(sep, ','))) {
> + char *delim, *option;
> +
> + option = sep + 1;
> + delim = strchr(option, '=');
> + if (!delim) {
> + delim = strchr(option, ',');
> +
> + if (!delim)
> + delim = str + len;
> + }
> +
> + if (!strncmp(option, "rotate", delim - option)) {
> + const char *value = delim + 1;
> + unsigned int deg;
> +
> + deg = simple_strtol(value, &sep, 10);
> +
> + /* Make sure we have parsed something */
> + if (sep == value)
> + return -EINVAL;
> +
> + switch (deg) {
> + case 0:
> + rotation |= DRM_MODE_ROTATE_0;
> + break;
> +
> + case 90:
> + rotation |= DRM_MODE_ROTATE_90;
> + break;
> +
> + case 180:
> + rotation |= DRM_MODE_ROTATE_180;
> + break;
> +
> + case 270:
> + rotation |= DRM_MODE_ROTATE_270;
> + break;
> +
> + default:
> + return -EINVAL;
> + }
> + } else if (!strncmp(option, "reflect_x", delim - option)) {
> + rotation |= DRM_MODE_REFLECT_X;
> + sep = delim;
> + } else if (!strncmp(option, "reflect_y", delim - option)) {
> + rotation |= DRM_MODE_REFLECT_Y;
> + sep = delim;
> + } else {
> + return -EINVAL;
> + }
> + }
> +
> + mode->rotation_reflection = rotation;
> +
> + return 0;
> +}
> +
> /**
> * drm_mode_parse_command_line_for_connector - parse command line modeline for connector
> * @mode_option: optional per connector mode option
> @@ -1569,6 +1634,10 @@ static int drm_mode_parse_cmdline_res_mode(const char *str, unsigned int length,
> *
> * <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
> *
> + * Additionals options can be provided following the mode, using a comma to
> + * separate each option. Valid options can be found in
> + * Documentation/fb/modedb.txt.
> + *
> * The intermediate drm_cmdline_mode structure is required to store additional
> * options from the command line modline like the force-enable/disable flag.
> *
> @@ -1581,9 +1650,10 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> {
> const char *name;
> bool named_mode = false, parse_extras = false;
> - unsigned int bpp_off = 0, refresh_off = 0;
> + unsigned int bpp_off = 0, refresh_off = 0, options_off = 0;
> unsigned int mode_end = 0;
> char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL;
> + char *options_ptr = NULL;
> char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL;
> int ret;
>
> @@ -1632,13 +1702,18 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> mode->refresh_specified = true;
> }
>
> + /* Locate the start of named options */
> + options_ptr = strchr(name, ',');
> + if (options_ptr)
> + options_off = options_ptr - name;
> +
> /* Locate the end of the name / resolution, and parse it */
> - if (bpp_ptr && refresh_ptr) {
> - mode_end = min(bpp_off, refresh_off);
> - } else if (bpp_ptr) {
> + if (bpp_ptr) {
> mode_end = bpp_off;
> } else if (refresh_ptr) {
> mode_end = refresh_off;
> + } else if (options_ptr) {
> + mode_end = options_off;
> } else {
> mode_end = strlen(name);
> parse_extras = true;
> @@ -1680,24 +1755,23 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option,
> else if (refresh_ptr)
> extra_ptr = refresh_end_ptr;
>
> - if (extra_ptr) {
> - if (!named_mode) {
> - int len = strlen(name) - (extra_ptr - name);
> + if (extra_ptr &&
> + extra_ptr != options_ptr) {
> + int len = strlen(name) - (extra_ptr - name);
>
> - ret = drm_mode_parse_cmdline_extra(extra_ptr, len,
> - connector, mode);
> - if (ret)
> - return false;
> - } else {
> - int remaining = strlen(name) - (extra_ptr - name);
> + ret = drm_mode_parse_cmdline_extra(extra_ptr, len,
> + connector, mode);
> + if (ret)
> + return false;
> + }
>
> - /*
> - * We still have characters to process, while
> - * we shouldn't have any
> - */
> - if (remaining > 0)
> - return false;
> - }
> + if (options_ptr) {
> + int len = strlen(name) - (options_ptr - name);
> +
> + ret = drm_mode_parse_cmdline_options(options_ptr, len,
> + connector, mode);
> + if (ret)
> + return false;
> }
>
> return true;
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index cdf2fb910010..8eebe0432c73 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -1025,6 +1025,16 @@ struct drm_cmdline_mode {
> * state to one of the DRM_FORCE_* values.
> */
> enum drm_connector_force force;
> +
> + /**
> + * @rotation_reflection:
> + *
> + * Initial rotation and reflection of the mode setup from the
> + * command line. See DRM_MODE_ROTATE_* and
> + * DRM_MODE_REFLECT_*. The only rotations supported are
> + * DRM_MODE_ROTATE_0 and DRM_MODE_ROTATE_180.
> + */
> + unsigned int rotation_reflection;
> };
>
> /**
>
More information about the dri-devel
mailing list