[PATCH v2 11/15] dt-bindings: display: Convert panel-lvds to DT schema

Rob Herring robh at kernel.org
Mon Jun 24 21:56:45 UTC 2019


Convert the panel-lvds binding to use DT schema. The panel-lvds schema
inherits from the panel-common.yaml schema and specific LVDS panel
bindings should inherit from this schema.

Cc: Thierry Reding <thierry.reding at gmail.com>
Cc: Sam Ravnborg <sam at ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Cc: dri-devel at lists.freedesktop.org
Reviewed-by: Maxime Ripard <maxime.ripard at bootlin.com>
Acked-by: Thierry Reding <treding at nvidia.com>
Signed-off-by: Rob Herring <robh at kernel.org>
---
 .../bindings/display/panel/lvds.yaml          | 107 ++++++++++++++++
 .../bindings/display/panel/panel-lvds.txt     | 121 ------------------
 2 files changed, 107 insertions(+), 121 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/panel/lvds.yaml
 delete mode 100644 Documentation/devicetree/bindings/display/panel/panel-lvds.txt

diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/panel/lvds.yaml
new file mode 100644
index 000000000000..d0083301acbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/lvds.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LVDS Display Panel
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
+  - Thierry Reding <thierry.reding at gmail.com>
+
+description: |+
+  LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
+  incompatible data link layers have been used over time to transmit image data
+  to LVDS panels. This bindings supports display panels compatible with the
+  following specifications.
+
+  [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
+  1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
+  [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
+  Semiconductor
+  [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
+  Electronics Standards Association (VESA)
+
+  Device compatible with those specifications have been marketed under the
+  FPD-Link and FlatLink brands.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    contains:
+      const: panel-lvds
+    description:
+      Shall contain "panel-lvds" in addition to a mandatory panel-specific
+      compatible string defined in individual panel bindings. The "panel-lvds"
+      value shall never be used on its own.
+
+  data-mapping:
+    enum:
+      - jeida-18
+      - jeida-24
+      - vesa-24
+    description: |
+      The color signals mapping order.
+
+      LVDS data mappings are defined as follows.
+
+      - "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and
+        [VESA] specifications. Data are transferred as follows on 3 LVDS lanes.
+
+      Slot	    0       1       2       3       4       5       6
+            ________________                         _________________
+      Clock	                \_______________________/
+              ______  ______  ______  ______  ______  ______  ______
+      DATA0	><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
+      DATA1	><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
+      DATA2	><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
+
+      - "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI]
+        specifications. Data are transferred as follows on 4 LVDS lanes.
+
+      Slot	    0       1       2       3       4       5       6
+            ________________                         _________________
+      Clock	                \_______________________/
+              ______  ______  ______  ______  ______  ______  ______
+      DATA0	><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__><
+      DATA1	><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__><
+      DATA2	><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__><
+      DATA3	><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__><
+
+      - "vesa-24" - 24-bit data mapping compatible with the [VESA] specification.
+        Data are transferred as follows on 4 LVDS lanes.
+
+      Slot	    0       1       2       3       4       5       6
+            ________________                         _________________
+      Clock	                \_______________________/
+              ______  ______  ______  ______  ______  ______  ______
+      DATA0	><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
+      DATA1	><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
+      DATA2	><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
+      DATA3	><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__><
+
+      Control signals are mapped as follows.
+
+      CTL0: HSync
+      CTL1: VSync
+      CTL2: Data Enable
+      CTL3: 0
+
+  data-mirror:
+    type: boolean
+    description:
+      If set, reverse the bit order described in the data mappings below on all
+      data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
+
+required:
+  - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.txt b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
deleted file mode 100644
index 250850a2150b..000000000000
--- a/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
+++ /dev/null
@@ -1,121 +0,0 @@
-LVDS Display Panel
-==================
-
-LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
-incompatible data link layers have been used over time to transmit image data
-to LVDS panels. This bindings supports display panels compatible with the
-following specifications.
-
-[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
-1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
-[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
-Semiconductor
-[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
-Electronics Standards Association (VESA)
-
-Device compatible with those specifications have been marketed under the
-FPD-Link and FlatLink brands.
-
-
-Required properties:
-
-- compatible: Shall contain "panel-lvds" in addition to a mandatory
-  panel-specific compatible string defined in individual panel bindings. The
-  "panel-lvds" value shall never be used on its own.
-- width-mm: See panel-common.txt.
-- height-mm: See panel-common.txt.
-- data-mapping: The color signals mapping order, "jeida-18", "jeida-24"
-  or "vesa-24".
-
-Optional properties:
-
-- label: See panel-common.txt.
-- gpios: See panel-common.txt.
-- backlight: See panel-common.txt.
-- power-supply: See panel-common.txt.
-- data-mirror: If set, reverse the bit order described in the data mappings
-  below on all data lanes, transmitting bits for slots 6 to 0 instead of
-  0 to 6.
-
-Required nodes:
-
-- panel-timing: See panel-common.txt.
-- ports: See panel-common.txt. These bindings require a single port subnode
-  corresponding to the panel LVDS input.
-
-
-LVDS data mappings are defined as follows.
-
-- "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and
-  [VESA] specifications. Data are transferred as follows on 3 LVDS lanes.
-
-Slot	    0       1       2       3       4       5       6
-	________________                         _________________
-Clock	                \_______________________/
-	  ______  ______  ______  ______  ______  ______  ______
-DATA0	><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
-DATA1	><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
-DATA2	><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
-
-- "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI]
-  specifications. Data are transferred as follows on 4 LVDS lanes.
-
-Slot	    0       1       2       3       4       5       6
-	________________                         _________________
-Clock	                \_______________________/
-	  ______  ______  ______  ______  ______  ______  ______
-DATA0	><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__><
-DATA1	><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__><
-DATA2	><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__><
-DATA3	><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__><
-
-- "vesa-24" - 24-bit data mapping compatible with the [VESA] specification.
-  Data are transferred as follows on 4 LVDS lanes.
-
-Slot	    0       1       2       3       4       5       6
-	________________                         _________________
-Clock	                \_______________________/
-	  ______  ______  ______  ______  ______  ______  ______
-DATA0	><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
-DATA1	><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
-DATA2	><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
-DATA3	><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__><
-
-Control signals are mapped as follows.
-
-CTL0: HSync
-CTL1: VSync
-CTL2: Data Enable
-CTL3: 0
-
-
-Example
--------
-
-panel {
-	compatible = "mitsubishi,aa121td01", "panel-lvds";
-
-	width-mm = <261>;
-	height-mm = <163>;
-
-	data-mapping = "jeida-24";
-
-	panel-timing {
-		/* 1280x800 @60Hz */
-		clock-frequency = <71000000>;
-		hactive = <1280>;
-		vactive = <800>;
-		hsync-len = <70>;
-		hfront-porch = <20>;
-		hback-porch = <70>;
-		vsync-len = <5>;
-		vfront-porch = <3>;
-		vback-porch = <15>;
-	};
-
-	port {
-		panel_in: endpoint {
-			remote-endpoint = <&lvds_encoder>;
-		};
-	};
-};
-- 
2.20.1



More information about the dri-devel mailing list