[PATCH 4/4] drm/panel: jh057n0090: Add regulator support

Guido Günther agx at sigxcpu.org
Tue Jun 25 17:05:19 UTC 2019


Allow to specify regulators for vcc and iovcc. According to the data
sheet the panel wants vcc (2.8V) and iovcc (1.8V) and there's no startup
dependency between the two.

Signed-off-by: Guido Günther <agx at sigxcpu.org>
---
 .../drm/panel/panel-rocktech-jh057n00900.c    | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
index b8a069055fbc..f8f6f087b9bc 100644
--- a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
+++ b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
@@ -15,6 +15,7 @@
 #include <linux/gpio/consumer.h>
 #include <linux/media-bus-format.h>
 #include <linux/module.h>
+#include <linux/regulator/consumer.h>
 #include <video/display_timing.h>
 #include <video/mipi_display.h>
 
@@ -47,6 +48,8 @@ struct jh057n {
 	struct drm_panel panel;
 	struct gpio_desc *reset_gpio;
 	struct backlight_device *backlight;
+	struct regulator *vcc;
+	struct regulator *iovcc;
 	bool prepared;
 
 	struct dentry *debugfs;
@@ -160,6 +163,8 @@ static int jh057n_unprepare(struct drm_panel *panel)
 		return 0;
 
 	mipi_dsi_dcs_set_display_off(dsi);
+	regulator_disable(ctx->iovcc);
+	regulator_disable(ctx->vcc);
 	ctx->prepared = false;
 
 	return 0;
@@ -174,6 +179,13 @@ static int jh057n_prepare(struct drm_panel *panel)
 		return 0;
 
 	DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
+	ret = regulator_enable(ctx->vcc);
+	if (ret < 0)
+		return ret;
+	ret = regulator_enable(ctx->iovcc);
+	if (ret < 0)
+		return ret;
+
 	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
 	usleep_range(20, 40);
 	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
@@ -301,6 +313,13 @@ static int jh057n_probe(struct mipi_dsi_device *dsi)
 	if (IS_ERR(ctx->backlight))
 		return PTR_ERR(ctx->backlight);
 
+	ctx->vcc = devm_regulator_get(dev, "vcc");
+	if (IS_ERR(ctx->vcc))
+		return PTR_ERR(ctx->vcc);
+	ctx->iovcc = devm_regulator_get(dev, "iovcc");
+	if (IS_ERR(ctx->iovcc))
+		return PTR_ERR(ctx->iovcc);
+
 	drm_panel_init(&ctx->panel);
 	ctx->panel.dev = dev;
 	ctx->panel.funcs = &jh057n_drm_funcs;
-- 
2.20.1



More information about the dri-devel mailing list