[PATCH v3 3/5] dt-bindings: drm/panel: simple: add ortustech, com37h3m05dtc panel

[Sam Ravnborg]

On Fri, Jun 07, 2019 at 01:11:09PM +0200, H. Nikolaus Schaller wrote:
> Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
Reviewed-by: Sam Ravnborg <sam at ravnborg.org>

We need OK from one of the DT people before we can apply this.

	Sam

> ---
>  .../display/panel/ortustech,com37h3m05dtc.txt        | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt b/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt
> new file mode 100644
> index 000000000000..c16907c02f80
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt
> @@ -0,0 +1,12 @@
> +OrtusTech COM37H3M05DTC Blanview 3.7" VGA portrait TFT-LCD panel
> +
> +Required properties:
> +- compatible: should be "ortustech,com37h3m05dtc"
> +
> +Optional properties:
> +- enable-gpios: GPIO pin to enable or disable the panel
> +- backlight: phandle of the backlight device attached to the panel
> +- power-supply: phandle of the regulator that provides the supply voltage
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.
> -- 
> 2.19.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel