[PATCH] [v2, 1/2] dt-bindings: panel: Add Boe Himax8279d is 1200x1920, 4-lane MIPI-DSI LCD panel

[Jerry Han]

Add dt-bingings for it.

Signed-off-by: Jerry Han <hanxu5 at huaqin.corp-partner.google.com>
Cc: Jitao Shi <jitao.shi at mediatek.com>
Cc: Nick Sanders <nsanders at google.com>
Cc: YH Lin <yueherngl at chromium.org>
Cc: Rock wang <rock_wang at himax.com.cn>
---
 .../bindings/display/panel/boe,himax8279d.txt      | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/boe,himax8279d.txt

diff --git a/Documentation/devicetree/bindings/display/panel/boe,himax8279d.txt b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.txt
new file mode 100644
index 0000000..3caea21
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.txt
@@ -0,0 +1,24 @@
+Boe Himax8279d 1200x1920 TFT LCD panel
+
+Required properties:
+- compatible: should be "boe,himax8279d8p" and one of: "boe,himax8279d10p"
+- reg: DSI virtual channel of the peripheral
+- enable-gpios: panel enable gpio
+- pp33-gpios: a GPIO phandle for the 3.3v pin that provides the supply voltage
+- pp18-gpios: a GPIO phandle for the 1.8v pin that provides the supply voltage
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+	&mipi_dsi {
+		panel {
+			compatible = "boe,himax8279d8p", "boe,himax8279d10p";
+			reg = <0>;
+			backlight = <&backlight>;
+			enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+			pp33-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+			pp18-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
+		};
+	};
-- 
1.9.1