[PATCH v2 0/5] drm/bridge: sii902x: HDMI-audio support and some fixes

[Laurent Pinchart]

Hi Jyri,

On Wed, Feb 27, 2019 at 11:54:18PM +0200, Jyri Sarha wrote:
> Changes since first version:
> - Moved reviewed patches to front:
>   - drm/bridge: sii902x: add input_bus_flags
>   - drm/bridge: sii902x: Set output mode to HDMI or DVI according to EDID
>   - drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz
> - Added a new fix:
>   - drm/bridge: sii902x: Select I2C_MUX
> - Applied some review suggestions to
>   - drm/bridge: sii902x: Implement HDMI audio support
>     - use clock-names property to name mclk
>     - move comment describing added mutex to struct sii902x and improve it
>     - cleanup sii902x_mute()
>     - cleanup sii902x_select_mclk_div()
>     - fix condition for checking ENABLE_BIT from i2s_fifo_routing in
>       sii902x_audio_codec_init()
> 
> Still to do
> 
> - Agree on i2s wires to HDMI audio fifo routing in dts. 
> 
>   The current scheme is quite straight forward, but there is maybe
>   there is even more straight forward solutions like:
> 
>   audio-fifo-enable = <1 1 1 1>;
>   audio-i2s-pin-to-fifo = <0 1 2 3>;
> 
>   Meaning that all fifos are enabled and SD0 is routed to fifo 0, SD1
>   to fifo 1, etc. I am not sure if the channel swap functionality
>   should show in dts binding.

Please forgive my lack of audio knowledge, but it this a system
description that should be encoded in DT, or a policy that should be
handled purely in software (either fully inside the kernel or with the
help of userspace) ?

> Jyri Sarha (4):
>   drm/bridge: sii902x: Set output mode to HDMI or DVI according to EDID
>   drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz
>   drm/bridge: sii902x: Select I2C_MUX
>   drm/bridge: sii902x: Implement HDMI audio support
> 
> Tomi Valkeinen (1):
>   drm/bridge: sii902x: add input_bus_flags
> 
>  .../bindings/display/bridge/sii902x.txt       |  36 +-
>  drivers/gpu/drm/bridge/Kconfig                |   1 +
>  drivers/gpu/drm/bridge/sii902x.c              | 472 +++++++++++++++++-
>  include/dt-bindings/sound/sii902x-audio.h     |  11 +
>  4 files changed, 512 insertions(+), 8 deletions(-)
>  create mode 100644 include/dt-bindings/sound/sii902x-audio.h

-- 
Regards,

Laurent Pinchart