[PATCH v2 1/7] drm: atmel-hlcdc: add config option for clock selection
Claudiu.Beznea at microchip.com
Claudiu.Beznea at microchip.com
Tue Mar 5 10:07:38 UTC 2019
From: Claudiu Beznea <claudiu.beznea at microchip.com>
SAM9x60 LCD Controller has no option to select clock source as previous
controllers have. To be able to use the same driver even for this LCD
controller add a config option to know if controller supports this.
Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
Reviewed-by: Sam Ravnborg <sam at ravnborg.org>
---
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 12 +++++++-----
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h | 2 ++
2 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
index 8070a558d7b1..957e6d2fb00f 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
@@ -78,7 +78,8 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
unsigned long mode_rate;
struct videomode vm;
unsigned long prate;
- unsigned int cfg;
+ unsigned int mask = ATMEL_HLCDC_CLKDIV_MASK | ATMEL_HLCDC_CLKPOL;
+ unsigned int cfg = 0;
int div;
vm.vfront_porch = adj->crtc_vsync_start - adj->crtc_vdisplay;
@@ -101,7 +102,10 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
(adj->crtc_hdisplay - 1) |
((adj->crtc_vdisplay - 1) << 16));
- cfg = ATMEL_HLCDC_CLKSEL;
+ if (!crtc->dc->desc->fixed_clksrc) {
+ cfg |= ATMEL_HLCDC_CLKSEL;
+ mask |= ATMEL_HLCDC_CLKSEL;
+ }
prate = 2 * clk_get_rate(crtc->dc->hlcdc->sys_clk);
mode_rate = adj->crtc_clock * 1000;
@@ -132,9 +136,7 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
cfg |= ATMEL_HLCDC_CLKDIV(div);
- regmap_update_bits(regmap, ATMEL_HLCDC_CFG(0),
- ATMEL_HLCDC_CLKSEL | ATMEL_HLCDC_CLKDIV_MASK |
- ATMEL_HLCDC_CLKPOL, cfg);
+ regmap_update_bits(regmap, ATMEL_HLCDC_CFG(0), mask, cfg);
cfg = 0;
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
index 70bd540d644e..0155efb9c443 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
@@ -328,6 +328,7 @@ atmel_hlcdc_layer_to_plane(struct atmel_hlcdc_layer *layer)
* @max_hpw: maximum horizontal back/front porch width
* @conflicting_output_formats: true if RGBXXX output formats conflict with
* each other.
+ * @fixed_clksrc: true if clock source is fixed
* @layers: a layer description table describing available layers
* @nlayers: layer description table size
*/
@@ -340,6 +341,7 @@ struct atmel_hlcdc_dc_desc {
int max_vpw;
int max_hpw;
bool conflicting_output_formats;
+ bool fixed_clksrc;
const struct atmel_hlcdc_layer_desc *layers;
int nlayers;
};
--
2.7.4
More information about the dri-devel
mailing list