[PATCH/RFC 05/15] dt-bindings: display: bridge: thc63lvd1024: Document dual-link operation

[Laurent Pinchart]

The THC63LVD1024 LVDS decoder can operate in two modes, single-link or
dual-link. In dual-link mode both input ports are used to carry even-
and odd-numbered pixels separately. Document this in the DT bindings,
along with the related rules governing port and usage.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
---
 .../bindings/display/bridge/thine,thc63lvd1024.txt         | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
index 37f0c04d5a28..4ff6eb9bbc19 100644
--- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
+++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
@@ -28,6 +28,13 @@ Optional video port nodes:
 - port at 1: Second LVDS input port
 - port at 3: Second digital CMOS/TTL parallel output
 
+The device can operate in single-link mode or dual-link mode. In single-link
+mode, all pixels are received on port at 0, and port at 1 shall not contain any
+endpoint. In dual-link mode, even-numbered pixels are received on port at 0 and
+odd-numbered pixels on port at 1, and both port at 0 and port at 1 shall contain
+endpoints.
+
+
 Example:
 --------
 
-- 
Regards,

Laurent Pinchart