[PATCH] drm/i915/ddi: Fix default eDP detection on port A

Jani Nikula jani.nikula at linux.intel.com
Thu Mar 7 10:34:33 UTC 2019


On Thu, 07 Mar 2019, Thomas Preston <thomas.preston at codethink.co.uk> wrote:
> Hi,
> Thanks for looking at this.
>
> On 07/03/2019 08:18, Jani Nikula wrote:
>> 
>> The subject should probably have "drm/i915/bios" or "drm/i915/vbt".
>> 
>
> Noted
>
>> On Wed, 06 Mar 2019, Thomas Preston <thomas.preston at codethink.co.uk> wrote:
>>> We rely on VBT DDI port info for eDP detection on GEN9 platforms and
>>> above. This breaks GEN9 platforms which don't have VBT because port A
>>> eDP now defaults to false. Fix this by defaulting to true when VBT is
>>> missing.
>> 
>> Please include more details about the machine that doesn't have VBT. Why
>> don't you have VBT?
>> 
>
> We have upgraded from an earlier kernel version (an Intel BSP on v4.1)
> which did not require VBT and so our BIOS isn't set up correctly. The
> BIOS doesn't set ASLS and fails to find ACPI OpRegion:
>
> [    9.368433] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x0
> [    9.368490] [drm:intel_opregion_setup [i915]] ACPI OpRegion not supported!
>
> So now our port A is DP instead of eDP. I was hoping a return to "default"
> values would remedy this, but I think it's pretty clear now that we should
> focus on fixing VBT.

In the long run you'll have better control of what your specific product
does by using a VBT. However, I think we'll probably have to take the
patch anyway.

> I've found a default VBT in the BSP but not sure how to get it into BIOS.
> If you could point me in the right direction here that would be really
> useful!

There are dangers with default VBTs too. They might contain incorrect
information about the specific board you have. You'll also have to set
up the opregion, not just VBT.

I'm afraid I can't help you there. You already know where to look to see
how the kernel side expects things to work.

For testing, the i915.vbt_firmware module parameter is helpful, so you
don't need to change your BIOS to change the VBT.

BR,
Jani.


>
>> Personally I think it was a mistake originally to make guesses about the
>> outputs in absence of VBT on DDI platforms, because we can never get the
>> generic guesses right across all ports and all products. And for the
>> record, that was the result of an easy choice to enable developers way
>> back when, and forgotten.
>> 
>> Certainly eDP is more likely than something else on port A. But this
>> will break any outlier products without VBT that have a non-eDP output
>> on port A. I guess it's a risk we have to take, and handle the fallout
>> later.
>> 
>> Acked-by: Jani Nikula <jani.nikula at intel.com>
>> 
>>> Fixes: commit a98d9c1d7e9b ("drm/i915/ddi: Rely on VBT DDI port info for eDP detection")
>> 
>> The Fixes: format does *not* include "commit" text.
>> 
>
> I got that from scripts/checkpatch.pl but noted, thanks.
>
> Kind regards,
> Tom

-- 
Jani Nikula, Intel Open Source Graphics Center


More information about the dri-devel mailing list