[PATCH/RFC 10/15] drm: rcar-du: lvds: Set LVEN and LVRES bits together on D3

[Jacopo Mondi]

Hi Laurent,

On Thu, Mar 07, 2019 at 01:23:40AM +0200, Laurent Pinchart wrote:
> On the D3 SoC the LVDS PHY must be enabled in the same register write
> that enables the LVDS output. Skip writing the LVEN bit independently
> on that platform, it will be set by the write that sets LVRES.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> ---
>  drivers/gpu/drm/rcar-du/rcar_lvds.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds.c b/drivers/gpu/drm/rcar-du/rcar_lvds.c
> index b1abe737dc05..5ac92ee15be0 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_lvds.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_lvds.c
> @@ -475,9 +475,13 @@ static void rcar_lvds_enable(struct drm_bridge *bridge)
>  	}
>
>  	if (lvds->info->quirks & RCAR_LVDS_QUIRK_GEN3_LVEN) {
> -		/* Turn on the LVDS PHY. */
> +		/*
> +		 * Turn on the LVDS PHY. On D3, the LVEN and LVRES bit must be
> +		 * set at the same time, so don't write the register yet.
> +		 */
>  		lvdcr0 |= LVDCR0_LVEN;
> -		rcar_lvds_write(lvds, LVDCR0, lvdcr0);
> +		if (!(lvds->info->quirks & RCAR_LVDS_QUIRK_PWD))

This is quite obscure, and works because D3 is the only SoC that has
(quirks & RCAR_LVDS_QUIRK_GEN3_LVEN) and (!(quirks & RCAR_LVDS_QUIRK_PWD)).

I guess there are not many ways around this.

> +			rcar_lvds_write(lvds, LVDCR0, lvdcr0);

I have verified this against the latest v1.50 datasheet, and it
matches what's reported in section 37.3.7 so please add my:
Reviewed-by: Jacopo Mondi <jacopo+renesas at jmondi.org>

I would like just to add that the same section prescribes a precise
order in which LVDS0 and LVDS1 have to be configured when working with
vertical stripe output. Is that enforced in this series?

Thanks
   j

>  	}
>
>  	if (!(lvds->info->quirks & RCAR_LVDS_QUIRK_EXT_PLL)) {
> --
> Regards,
>
> Laurent Pinchart
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20190308/b7417b5c/attachment.sig>