[PATCH v3 0/6] drm/bridge: sii902x: HDMI-audio support and some fixes

[Jyri Sarha]

Changes since v2:
- split dt-binding and related header to a separate patch
- add vendor prefix to i2s-fifo-routing dt-property
- add license identifier and copyright notice to sii902x-audio.h
- sii902x_get_modes() reorder local variables
- put clk_prepare_enable() before clk_get_rate(), according to documentation
  clk_get_rate() is only valid once the clock is enabled

The three already reviewed patches are in front:
  - drm/bridge: sii902x: add input_bus_flags
  - drm/bridge: sii902x: Set output mode to HDMI or DVI according to EDID
  - drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz

The previous review round can be found here:
https://patchwork.kernel.org/cover/10832351/

Jyri Sarha (5):
  drm/bridge: sii902x: Set output mode to HDMI or DVI according to EDID
  drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz
  dt-bindings: display: sii902x: Remove trailing white space
  dt-bindings: display: sii902x: Add HDMI audio bindings
  drm/bridge: sii902x: Implement HDMI audio support

Tomi Valkeinen (1):
  drm/bridge: sii902x: add input_bus_flags

 .../bindings/display/bridge/sii902x.txt       |  36 +-
 drivers/gpu/drm/bridge/sii902x.c              | 472 +++++++++++++++++-
 include/dt-bindings/sound/sii902x-audio.h     |  17 +
 3 files changed, 517 insertions(+), 8 deletions(-)
 create mode 100644 include/dt-bindings/sound/sii902x-audio.h

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki