[PATCH v4 4/6] dt-bindings: display: sii902x: Remove trailing white space

[Jyri Sarha]

Remove trailing white space from sii902x display bridge binding.

Signed-off-by: Jyri Sarha <jsarha at ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 Documentation/devicetree/bindings/display/bridge/sii902x.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
index 72d2dc6c3e6b..c4c1855ca654 100644
--- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
+++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
@@ -5,7 +5,7 @@ Required properties:
 	- reg: i2c address of the bridge
 
 Optional properties:
-	- interrupts: describe the interrupt line used to inform the host 
+	- interrupts: describe the interrupt line used to inform the host
 	  about hotplug events.
 	- reset-gpios: OF device-tree gpio specification for RST_N pin.
 
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki