[PATCH 10/18] drm/mediatek: add gmc_bits for ovl private data

[Yongqiang Niu]

On Tue, 2018-12-25 at 12:15 +0800, Nicolas Boichat wrote:
> On Mon, Dec 24, 2018 at 6:53 PM Yongqiang Niu
> <yongqiang.niu at mediatek.com> wrote:
> >
> > This patch add gmc_bits for ovl private data
> >
> > Signed-off-by: Yongqiang Niu <yongqiang.niu at mediatek.com>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 23 +++++++++++++++++++++--
> >  1 file changed, 21 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > index 28d1911..afb313c 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> > @@ -39,7 +39,9 @@
> >  #define DISP_REG_OVL_ADDR_MT8173               0x0f40
> >  #define DISP_REG_OVL_ADDR(ovl, n)              ((ovl)->data->addr + 0x20 * (n))
> >
> > -#define        OVL_RDMA_MEM_GMC        0x40402020
> > +#define GMC_THRESHOLD_BITS     16
> > +#define GMC_THRESHOLD_HIGH     ((1 << GMC_THRESHOLD_BITS) / 4)
> > +#define GMC_THRESHOLD_LOW      ((1 << GMC_THRESHOLD_BITS) / 8)
> >
> >  #define OVL_CON_BYTE_SWAP      BIT(24)
> >  #define OVL_CON_MTX_YUV_TO_RGB (6 << 16)
> > @@ -57,6 +59,7 @@
> >
> >  struct mtk_disp_ovl_data {
> >         unsigned int addr;
> > +       unsigned int gmc_bits;
> >         bool fmt_rgb565_is_0;
> >  };
> >
> > @@ -140,9 +143,23 @@ static unsigned int mtk_ovl_layer_nr(struct mtk_ddp_comp *comp)
> >  static void mtk_ovl_layer_on(struct mtk_ddp_comp *comp, unsigned int idx)
> >  {
> >         unsigned int reg;
> > +       unsigned int gmc_thrshd_l;
> > +       unsigned int gmc_thrshd_h;
> > +       unsigned int gmc_value;
> > +       struct mtk_disp_ovl *ovl = comp_to_ovl(comp);
> >
> >         writel(0x1, comp->regs + DISP_REG_OVL_RDMA_CTRL(idx));
> > -       writel(OVL_RDMA_MEM_GMC, comp->regs + DISP_REG_OVL_RDMA_GMC(idx));
> > +
> > +       gmc_thrshd_l = GMC_THRESHOLD_LOW >>
> > +                     (GMC_THRESHOLD_BITS - ovl->data->gmc_bits);
> > +       gmc_thrshd_h = GMC_THRESHOLD_HIGH >>
> > +                     (GMC_THRESHOLD_BITS - ovl->data->gmc_bits);
> > +       if (ovl->data->gmc_bits == 10)
> > +               gmc_value = gmc_thrshd_h | gmc_thrshd_h << 16;
> 
> I don't really get what this does, but is it intentional that you
> don't use gmc_thrshd_l here?
> 
GMC register was set RDMA ultra and pre-ultra threshold.
MT8183 GMC register define is different with other SOC, gmc_thrshd_l not
used here.

> Also, if you only ever use 8 or 10 bits gmc, maybe it's easier to
> hard-code the 2 values?
> if (ovl->data->gmc_bits == 10)
>   gmc_value = OVL_RDMA_MEM_GMC_10BIT;
> else
>   gmc_value = OVL_RDMA_MEM_GMC_8BIT; //0x40402020
> 

our internal maintainer prefer calculate GMC setting with private data
gmc bit instead of hard-core.
and with calculation function that will be more flexible 

> > +       else
> > +               gmc_value = gmc_thrshd_l | gmc_thrshd_l << 8 |
> > +                           gmc_thrshd_h << 16 | gmc_thrshd_h << 24;
> > +       writel(gmc_value, comp->regs + DISP_REG_OVL_RDMA_GMC(idx));
> >
> >         reg = readl(comp->regs + DISP_REG_OVL_SRC_CON);
> >         reg = reg | BIT(idx);
> > @@ -324,11 +341,13 @@ static int mtk_disp_ovl_remove(struct platform_device *pdev)
> >
> >  static const struct mtk_disp_ovl_data mt2701_ovl_driver_data = {
> >         .addr = DISP_REG_OVL_ADDR_MT2701,
> > +       .gmc_bits = 8,
> >         .fmt_rgb565_is_0 = false,
> >  };
> >
> >  static const struct mtk_disp_ovl_data mt8173_ovl_driver_data = {
> >         .addr = DISP_REG_OVL_ADDR_MT8173,
> > +       .gmc_bits = 8,
> >         .fmt_rgb565_is_0 = true,
> >  };
> >
> > --
> > 1.8.1.1.dirty
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel