[PATCH 02/21] drm/bridge: tc358767: reset voltage-swing & pre-emphasis

[Tomi Valkeinen]

We need to reset DPCD voltage-swing & pre-emphasis before starting the
link training, as otherwise tc358767 will use the previous values as
minimums.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
---
 drivers/gpu/drm/bridge/tc358767.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 7031c4f52c57..11a50f7bb4be 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -956,6 +956,12 @@ static int tc_main_link_setup(struct tc_data *tc)
 	if (ret < 0)
 		goto err_dpcd_write;
 
+	// Reset voltage-swing & pre-emphasis
+	tmp[0] = tmp[1] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0;
+	ret = drm_dp_dpcd_write(aux, DP_TRAINING_LANE0_SET, tmp, 2);
+	if (ret < 0)
+		goto err_dpcd_write;
+
 	ret = tc_link_training(tc, DP_TRAINING_PATTERN_1);
 	if (ret)
 		goto err;
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki