[PATCH] ARM: imx_v6_v7_defconfig: Enable CONFIG_PWM_IMX27

[Uwe Kleine-König]

On Fri, Mar 22, 2019 at 10:47:00AM +0100, Thierry Reding wrote:
> On Thu, Mar 21, 2019 at 10:49:03AM +0100, Uwe Kleine-König wrote:
> > Hello,
> > 
> > On Wed, Mar 20, 2019 at 01:01:26PM +0000, Leonard Crestez wrote:
> > > Commit d80f8206905c ("pwm: imx: Split into two drivers") also adds a new
> > > CONFIG_PWM_IMX27 for the PWM block on recent IMX chips and we should
> > > enable it by default for imx.
> > > 
> > > Restoring the PWM driver fixes an infinite probe loop in 5.1-rc1 on
> > > various imx6qdl-sabresd boards.
> > > 
> > > Signed-off-by: Leonard Crestez <leonard.crestez at nxp.com>
> > > Reported-by: Abel Vesa <abel.vesa at nxp.com>
> > 
> > This is prior art:
> > 
> > https://patchwork.ozlabs.org/project/linux-pwm/list/?series=85452&state=%2A&archive=both
> > 
> > unfortunately this didn't get an Ack by Shawn and Thierry (added to
> > recipients) marked it as "Not Applicable".
> 
> If I mark patches as "not applicable" it generally means that I don't
> intend to apply them to the PWM tree.

I understood that. In this case however it would in my eyes have made
sense to take these patches together with the patch that does the driver
split via the pwm tree to make it less likely that people using the
respective defconfigs don't get the PWM driver enabled. That's the
situation now on 5.1-rc1 and people actuall hit this problem. :-| That's
why I wrote:

	I think the easiest handling would be to let them go via the pwm
	tree with Shawn's Ack to get the update near to the actual split
	into the mainline.

in the cover letter.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |