[PATCH v2 07/15] drm/bridge: tc358767: Simplify AUX data write

[Tomi Valkeinen]

On 22/03/2019 05:28, Andrey Smirnov wrote:
> Simplify AUX data write by dropping index arithmetic and shifting and
> replacing it with a call to a helper function that does three things:
> 
>     1. Copies user-provided data into a write buffer
>     2. Optionally fixes the endianness of the write buffer (not needed
>        on LE hosts)
>     3. Transfers contenst of the write buffer to up to 4 32-bit
>        registers on the chip
> 
> Note that separate data endianness fix:
> 
>     tmp = (tmp << 8) | buf[i];
> 
> that was reserved for DP_AUX_I2C_WRITE looks really strange, since it
> will place data differently depending on the passed user-data
> size. E.g. for a write of 1 byte, data transferred to the chip would
> look like:
> 
> [byte0] [dummy1] [dummy2] [dummy3]
> 
> whereas for a write of 4 bytes we'd get:
> 
> [byte3] [byte2] [byte1] [byte0]
> 
> Since there's no indication in the datasheet that I2C write buffer
> should be treated differently than AUX write buffer and no comment in
> the original code explaining why it was done this way, that special
> I2C write buffer transformation was dropped in this patch.
> 
> Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
> Cc: Archit Taneja <architt at codeaurora.org>
> Cc: Andrzej Hajda <a.hajda at samsung.com>
> Cc: Laurent Pinchart <Laurent.pinchart at ideasonboard.com>
> Cc: Tomi Valkeinen <tomi.valkeinen at ti.com>
> Cc: Andrey Gusakov <andrey.gusakov at cogentembedded.com>
> Cc: Philipp Zabel <p.zabel at pengutronix.de>
> Cc: Chris Healy <cphealy at gmail.com>
> Cc: Lucas Stach <l.stach at pengutronix.de>
> Cc: dri-devel at lists.freedesktop.org
> Cc: linux-kernel at vger.kernel.org
> ---
>  drivers/gpu/drm/bridge/tc358767.c | 58 +++++++++++++++++++------------
>  1 file changed, 36 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
> index 81c10a5d8106..21374565585d 100644
> --- a/drivers/gpu/drm/bridge/tc358767.c
> +++ b/drivers/gpu/drm/bridge/tc358767.c
> @@ -307,6 +307,31 @@ static int tc_aux_get_status(struct tc_data *tc, u8 *reply)
>  	return 0;
>  }
>  
> +static int tc_aux_write_data(struct tc_data *tc, const void *data,
> +			     size_t size)
> +{
> +	u32 auxwdata[DP_AUX_MAX_PAYLOAD_BYTES / sizeof(u32)] = { 0 };
> +	int ret, i, count = DIV_ROUND_UP(size, 4);

Should 4 there be sizeof(u32)?

> +
> +	memcpy(auxwdata, data, size);
> +
> +	for (i = 0; i < count; i++) {
> +		ret = regmap_write(tc->regmap, DP0_AUXWDATA(i),
> +				   /*
> +				    * Our regmap is configured as LE
> +				    * for register data, so we need
> +				    * undo any byte swapping that will
> +				    * happened to preserve original
> +				    * byte order.
> +				    */
> +				   cpu_to_le32(auxwdata[i]));

Can regmap_bulk_write or regmap_raw_write be used here?

 Tomi

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki