[PATCH 5/5] media: tvp5150: add support to limit tv norms on connector
Marco Felsch
m.felsch at pengutronix.de
Thu Mar 21 09:53:23 UTC 2019
Hi Mauro,
On 19-03-20 14:29, Mauro Carvalho Chehab wrote:
> Em Wed, 20 Mar 2019 17:36:50 +0100
> Marco Felsch <m.felsch at pengutronix.de> escreveu:
>
> > Hi Mauro,
> >
> > On 19-03-20 11:18, Mauro Carvalho Chehab wrote:
> > > Em Sat, 2 Feb 2019 13:10:04 +0100
> > > Marco Felsch <m.felsch at pengutronix.de> escreveu:
> > >
> > > > The tvp5150 accepts NTSC(M,J,4.43), PAL (B,D,G,H,I,M,N) and SECAM video
> > > > data and is able to auto-detect the input signal.
> > >
> > > Hmm... I'm afraid of this change. As far as I remember, I tested some
> > > weird format variants like V4L2_STD_PAL_60 a long time ago, but there's
> > > no way to force video to use those. The format selection logic simply
> > > places the device on auto-detect mode for those weirdos, and that
> > > works fine at the devices I know.
> >
> > Sorry I didn't get this. The format is set to autodetect during probe().
>
> Yes, but apps will change based on G_FMT, TRY_FMT and S_FMT.
>
> See, my main concern here is with existing tvp5150 non-platform
> drivers, as a change there would be a regression.
Of course I won't break existing stuff too :)
> > If there is no format limitation this won't be changed during
> > media.link_setup(). You're right I forgot to check if the cur_connector
> > is available during tvp5150_s_std(), in case of pdata related devices.
>
> Yeah, that's what I'm talking about.
So are you with me with the following lines? This should avoid breaking
exisiting drivers.
static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
{
struct tvp5150 *decoder = to_tvp5150(sd);
+ v4l2_std_id supported_norms = decoder->cur_connector ?
+ decoder->cur_connector->base.connector.analog.supported_tvnorms :
+ V4L2_STD_ALL;
...
}
> > In such a case we should set supported_norms to V4L2_STD_ALL as it is
> > done by v4l2_fwnode_parse_connector() if no limitations are given.
> >
> > Btw, how does it look with the other patchset?
>
> I asked Hans to take a look at the patch series, as he's sub-maintaining
> the v4l2 stuff.
Cheers.
> I'm intending to take
> a deeper look at patch 2/7 v4 from the past series.
That would be great. I'm looking forward for your feedback :)
Regards,
Marco
> >
> > Regards,
> > Marco
> >
> > >
> > > A change like that may break things. So I would actually have a quirk
> > > to optionally disable auto-detection on devices that this is not know
> > > to work.
> > >
> > > > The auto-detection
> > > > does not work if the connector does not receive an input signal and the
> > > > tvp5150 might not be configured correctly. This misconfiguration leads
> > > > into wrong decoded video streams if the tvp5150 gets powered on before
> > > > the video signal is present.
> > > >
> > > > Limit the supported tv norms according to the actual selected connector
> > > > to avoid a misconfiguration.
> > > >
> > > > Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
> > > > ---
> > > > drivers/media/i2c/tvp5150.c | 42 ++++++++++++++++++++++++++++++++++++-
> > > > 1 file changed, 41 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
> > > > index f3a2ad00a40d..7619793dee67 100644
> > > > --- a/drivers/media/i2c/tvp5150.c
> > > > +++ b/drivers/media/i2c/tvp5150.c
> > > > @@ -32,6 +32,13 @@
> > > > #define TVP5150_MBUS_FMT MEDIA_BUS_FMT_UYVY8_2X8
> > > > #define TVP5150_FIELD V4L2_FIELD_ALTERNATE
> > > > #define TVP5150_COLORSPACE V4L2_COLORSPACE_SMPTE170M
> > > > +#define TVP5150_STD_MASK (V4L2_STD_NTSC | \
> > > > + V4L2_STD_NTSC_443 | \
> > > > + V4L2_STD_PAL | \
> > > > + V4L2_STD_PAL_M | \
> > > > + V4L2_STD_PAL_N | \
> > > > + V4L2_STD_PAL_Nc | \
> > > > + V4L2_STD_SECAM)
> > > >
> > > > MODULE_DESCRIPTION("Texas Instruments TVP5150A/TVP5150AM1/TVP5151 video decoder driver");
> > > > MODULE_AUTHOR("Mauro Carvalho Chehab");
> > > > @@ -74,6 +81,7 @@ struct tvp5150 {
> > > > struct media_pad pads[TVP5150_NUM_PADS];
> > > > int pads_state[TVP5150_NUM_PADS];
> > > > struct tvp5150_connector *connectors;
> > > > + struct tvp5150_connector *cur_connector;
> > > > int connectors_num;
> > > > bool modify_second_link;
> > > > #endif
> > > > @@ -794,17 +802,27 @@ static int tvp5150_g_std(struct v4l2_subdev *sd, v4l2_std_id *std)
> > > > static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
> > > > {
> > > > struct tvp5150 *decoder = to_tvp5150(sd);
> > > > + v4l2_std_id supported_norms =
> > > > + decoder->cur_connector->base.connector.analog.supported_tvnorms;
> > > >
> > > > if (decoder->norm == std)
> > > > return 0;
> > > >
> > > > + /*
> > > > + * check if requested std or group of std's is/are supported by the
> > > > + * connector
> > > > + */
> > > > + if ((supported_norms & std) == 0)
> > > > + return -EINVAL;
> > > > +
> > > > /* Change cropping height limits */
> > > > if (std & V4L2_STD_525_60)
> > > > decoder->rect.height = TVP5150_V_MAX_525_60;
> > > > else
> > > > decoder->rect.height = TVP5150_V_MAX_OTHERS;
> > > >
> > > > - decoder->norm = std;
> > > > + /* set only the specific supported std in case of group of std's */
> > > > + decoder->norm = supported_norms & std;
> > > >
> > > > return tvp5150_set_std(sd, std);
> > > > }
> > > > @@ -1298,6 +1316,7 @@ static int tvp5150_link_setup(struct media_entity *entity,
> > > > int *pad_state = &decoder->pads_state[0];
> > > > int i, active_pad, ret = 0;
> > > > bool is_svideo = false;
> > > > + bool update_cur_connector = false;
> > > >
> > > > /*
> > > > * The tvp state is determined by the enabled sink pad link.
> > > > @@ -1344,10 +1363,12 @@ static int tvp5150_link_setup(struct media_entity *entity,
> > > > decoder->modify_second_link = false;
> > > > tvp5150_s_routing(sd, TVP5150_SVIDEO,
> > > > TVP5150_NORMAL, 0);
> > > > + update_cur_connector = true;
> > > > }
> > > > } else {
> > > > tvp5150_s_routing(sd, tvp5150_pad->index,
> > > > TVP5150_NORMAL, 0);
> > > > + update_cur_connector = true;
> > > > }
> > > > } else {
> > > > /*
> > > > @@ -1376,6 +1397,14 @@ static int tvp5150_link_setup(struct media_entity *entity,
> > > > active_pad, TVP5150_BLACK_SCREEN, 0);
> > > > decoder->modify_second_link = false;
> > > > }
> > > > +
> > > > + if (update_cur_connector) {
> > > > + /* Update tvnorm according to connector */
> > > > + decoder->cur_connector =
> > > > + container_of(remote, struct tvp5150_connector, pad);
> > > > + tvp5150_s_std(sd,
> > > > + decoder->cur_connector->base.connector.analog.supported_tvnorms);
> > > > + }
> > > > out:
> > > > return ret;
> > > > }
> > > > @@ -1605,6 +1634,9 @@ static int tvp5150_registered(struct v4l2_subdev *sd)
> > > > }
> > > > tvp5150_selmux(sd);
> > > > decoder->modify_second_link = false;
> > > > + decoder->cur_connector = &decoder->connectors[i];
> > > > + tvp5150_s_std(sd,
> > > > + decoder->connectors[i].base.connector.analog.supported_tvnorms);
> > > > }
> > > > }
> > > > #endif
> > > > @@ -1925,6 +1957,14 @@ static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
> > > > ret = -EINVAL;
> > > > goto err;
> > > > }
> > > > + if (!(c.connector.analog.supported_tvnorms &
> > > > + TVP5150_STD_MASK)) {
> > > > + dev_err(dev,
> > > > + "Invalid tv norm(s) on connector %s.\n",
> > > > + c.label);
> > > > + ret = -EINVAL;
> > > > + goto err;
> > > > + }
> > > > in++;
> > > > break;
> > > > case TVP5150_PAD_VID_OUT:
> > >
> > >
> > >
> > > Thanks,
> > > Mauro
> > >
> >
>
>
>
> Thanks,
> Mauro
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the dri-devel
mailing list