[PATCH 01/11] drm/meson: Switch PLL to 5.94GHz base for 297Mhz pixel clock

[Neil Armstrong]

On Amlogic G12A SoC, the 2,97GHz PLL frequency is not stable enough
to provide a correct 297MHz pixel clock, so switch the PLL base
frequency with a /2 OD when the 297MHz pixel clock is requested.

This solves the issue on G12A and also works fine on GXBB, GXL & GXM.

Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
 drivers/gpu/drm/meson/meson_vclk.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_vclk.c b/drivers/gpu/drm/meson/meson_vclk.c
index f6ba35a405f8..c15a5a5df633 100644
--- a/drivers/gpu/drm/meson/meson_vclk.c
+++ b/drivers/gpu/drm/meson/meson_vclk.c
@@ -396,8 +396,8 @@ struct meson_vclk_params {
 	},
 	[MESON_VCLK_HDMI_297000] = {
 		.pixel_freq = 297000,
-		.pll_base_freq = 2970000,
-		.pll_od1 = 1,
+		.pll_base_freq = 5940000,
+		.pll_od1 = 2,
 		.pll_od2 = 1,
 		.pll_od3 = 1,
 		.vid_pll_div = VID_PLL_DIV_5,
-- 
2.21.0