[PATCH 11/11] drm/meson: Add G12A support for the DW-HDMI Glue
Neil Armstrong
narmstrong at baylibre.com
Mon Mar 25 14:18:24 UTC 2019
The Amlogic G12A embeds the same Synopsys DW-HDMI Controller,
but with :
- a "backport" of the HDR signaling registers from more recent
DW-HDMI controllers, this will need a tweak since it's not
normally present on this version of the DW-HDMI controller
- A direct mapping of TOP and DW-HDMI registers instead of an
internal bus accessed using read/write registers
- Support for RX-SENSE, but not yet implemented
- Support for HDMI 2.1 Dynamic HDR, but not yet implemented
- Different registers mapping for the HDMI PHY setup
This patchs adds support for these changes while providing exact
same support as the previous GXBB, GXL & GXM SoCs.
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 163 ++++++++++++++++++++------
drivers/gpu/drm/meson/meson_dw_hdmi.h | 32 ++++-
2 files changed, 157 insertions(+), 38 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 563953ec6ad0..779da21143b9 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -20,6 +20,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/component.h>
+#include <linux/of_device.h>
#include <linux/of_graph.h>
#include <linux/reset.h>
#include <linux/clk.h>
@@ -105,6 +106,7 @@
#define HDMITX_TOP_ADDR_REG 0x0
#define HDMITX_TOP_DATA_REG 0x4
#define HDMITX_TOP_CTRL_REG 0x8
+#define HDMITX_TOP_G12A_OFFSET 0x8000
/* Controller Communication Channel */
#define HDMITX_DWC_ADDR_REG 0x10
@@ -118,6 +120,8 @@
#define HHI_HDMI_PHY_CNTL1 0x3a4 /* 0xe9 */
#define HHI_HDMI_PHY_CNTL2 0x3a8 /* 0xea */
#define HHI_HDMI_PHY_CNTL3 0x3ac /* 0xeb */
+#define HHI_HDMI_PHY_CNTL4 0x3b0 /* 0xec */
+#define HHI_HDMI_PHY_CNTL5 0x3b4 /* 0xed */
static DEFINE_SPINLOCK(reg_lock);
@@ -127,12 +131,26 @@ enum meson_venc_source {
MESON_VENC_SOURCE_ENCP = 2,
};
+struct meson_dw_hdmi;
+
+struct meson_dw_hdmi_data {
+ unsigned int (*top_read)(struct meson_dw_hdmi *dw_hdmi,
+ unsigned int addr);
+ void (*top_write)(struct meson_dw_hdmi *dw_hdmi,
+ unsigned int addr, unsigned int data);
+ unsigned int (*dwc_read)(struct meson_dw_hdmi *dw_hdmi,
+ unsigned int addr);
+ void (*dwc_write)(struct meson_dw_hdmi *dw_hdmi,
+ unsigned int addr, unsigned int data);
+};
+
struct meson_dw_hdmi {
struct drm_encoder encoder;
struct dw_hdmi_plat_data dw_plat_data;
struct meson_drm *priv;
struct device *dev;
void __iomem *hdmitx;
+ const struct meson_dw_hdmi_data *data;
struct reset_control *hdmitx_apb;
struct reset_control *hdmitx_ctrl;
struct reset_control *hdmitx_phy;
@@ -174,6 +192,12 @@ static unsigned int dw_hdmi_top_read(struct meson_dw_hdmi *dw_hdmi,
return data;
}
+static unsigned int dw_hdmi_g12a_top_read(struct meson_dw_hdmi *dw_hdmi,
+ unsigned int addr)
+{
+ return readl(dw_hdmi->hdmitx + HDMITX_TOP_G12A_OFFSET + (addr << 2));
+}
+
static inline void dw_hdmi_top_write(struct meson_dw_hdmi *dw_hdmi,
unsigned int addr, unsigned int data)
{
@@ -191,18 +215,24 @@ static inline void dw_hdmi_top_write(struct meson_dw_hdmi *dw_hdmi,
spin_unlock_irqrestore(®_lock, flags);
}
+static inline void dw_hdmi_g12a_top_write(struct meson_dw_hdmi *dw_hdmi,
+ unsigned int addr, unsigned int data)
+{
+ writel(data, dw_hdmi->hdmitx + HDMITX_TOP_G12A_OFFSET + (addr << 2));
+}
+
/* Helper to change specific bits in PHY registers */
static inline void dw_hdmi_top_write_bits(struct meson_dw_hdmi *dw_hdmi,
unsigned int addr,
unsigned int mask,
unsigned int val)
{
- unsigned int data = dw_hdmi_top_read(dw_hdmi, addr);
+ unsigned int data = dw_hdmi->data->top_read(dw_hdmi, addr);
data &= ~mask;
data |= val;
- dw_hdmi_top_write(dw_hdmi, addr, data);
+ dw_hdmi->data->top_write(dw_hdmi, addr, data);
}
static unsigned int dw_hdmi_dwc_read(struct meson_dw_hdmi *dw_hdmi,
@@ -226,6 +256,12 @@ static unsigned int dw_hdmi_dwc_read(struct meson_dw_hdmi *dw_hdmi,
return data;
}
+static unsigned int dw_hdmi_g12a_dwc_read(struct meson_dw_hdmi *dw_hdmi,
+ unsigned int addr)
+{
+ return readb(dw_hdmi->hdmitx + addr);
+}
+
static inline void dw_hdmi_dwc_write(struct meson_dw_hdmi *dw_hdmi,
unsigned int addr, unsigned int data)
{
@@ -243,18 +279,24 @@ static inline void dw_hdmi_dwc_write(struct meson_dw_hdmi *dw_hdmi,
spin_unlock_irqrestore(®_lock, flags);
}
+static inline void dw_hdmi_g12a_dwc_write(struct meson_dw_hdmi *dw_hdmi,
+ unsigned int addr, unsigned int data)
+{
+ writeb(data, dw_hdmi->hdmitx + addr);
+}
+
/* Helper to change specific bits in controller registers */
static inline void dw_hdmi_dwc_write_bits(struct meson_dw_hdmi *dw_hdmi,
unsigned int addr,
unsigned int mask,
unsigned int val)
{
- unsigned int data = dw_hdmi_dwc_read(dw_hdmi, addr);
+ unsigned int data = dw_hdmi->data->dwc_read(dw_hdmi, addr);
data &= ~mask;
data |= val;
- dw_hdmi_dwc_write(dw_hdmi, addr, data);
+ dw_hdmi->data->dwc_write(dw_hdmi, addr, data);
}
/* Bridge */
@@ -300,6 +342,24 @@ static void meson_hdmi_phy_setup_mode(struct meson_dw_hdmi *dw_hdmi,
regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL0, 0x33632122);
regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL3, 0x2000115b);
}
+ } else if (dw_hdmi_is_compatible(dw_hdmi,
+ "amlogic,meson-g12a-dw-hdmi")) {
+ if (pixel_clock >= 371250) {
+ /* 5.94Gbps, 3.7125Gbps */
+ regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL0, 0x37eb65c4);
+ regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL3, 0x2ab0ff3b);
+ regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL5, 0x0000080b);
+ } else if (pixel_clock >= 297000) {
+ /* 2.97Gbps */
+ regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL0, 0x33eb6262);
+ regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL3, 0x2ab0ff3b);
+ regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL5, 0x00000003);
+ } else {
+ /* 1.485Gbps, and below */
+ regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL0, 0x33eb4242);
+ regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL3, 0x2ab0ff3b);
+ regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL5, 0x00000003);
+ }
}
}
@@ -375,7 +435,7 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
regmap_update_bits(priv->hhi, HHI_MEM_PD_REG0, 0xff << 8, 0);
/* Bring out of reset */
- dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_SW_RESET, 0);
+ dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_SW_RESET, 0);
/* Enable internal pixclk, tmds_clk, spdif_clk, i2s_clk, cecclk */
dw_hdmi_top_write_bits(dw_hdmi, HDMITX_TOP_CLK_CNTL,
@@ -384,24 +444,25 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
0x3 << 4, 0x3 << 4);
/* Enable normal output to PHY */
- dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12));
+ dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12));
/* TMDS pattern setup (TOFIX Handle the YUV420 case) */
if (mode->clock > 340000) {
- dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01, 0);
- dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23,
+ dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01,
+ 0);
+ dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23,
0x03ff03ff);
} else {
- dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01,
+ dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01,
0x001f001f);
- dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23,
+ dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_23,
0x001f001f);
}
/* Load TMDS pattern */
- dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_CNTL, 0x1);
+ dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_CNTL, 0x1);
msleep(20);
- dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_CNTL, 0x2);
+ dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_CNTL, 0x2);
/* Setup PHY parameters */
meson_hdmi_phy_setup_mode(dw_hdmi, mode);
@@ -412,7 +473,8 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
/* BIT_INVERT */
if (dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
- dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxm-dw-hdmi"))
+ dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxm-dw-hdmi") ||
+ dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-g12a-dw-hdmi"))
regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1,
BIT(17), 0);
else
@@ -480,7 +542,7 @@ static enum drm_connector_status dw_hdmi_read_hpd(struct dw_hdmi *hdmi,
{
struct meson_dw_hdmi *dw_hdmi = (struct meson_dw_hdmi *)data;
- return !!dw_hdmi_top_read(dw_hdmi, HDMITX_TOP_STAT0) ?
+ return !!dw_hdmi->data->top_read(dw_hdmi, HDMITX_TOP_STAT0) ?
connector_status_connected : connector_status_disconnected;
}
@@ -490,11 +552,11 @@ static void dw_hdmi_setup_hpd(struct dw_hdmi *hdmi,
struct meson_dw_hdmi *dw_hdmi = (struct meson_dw_hdmi *)data;
/* Setup HPD Filter */
- dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_HPD_FILTER,
+ dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_HPD_FILTER,
(0xa << 12) | 0xa0);
/* Clear interrupts */
- dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_INTR_STAT_CLR,
+ dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_INTR_STAT_CLR,
HDMITX_TOP_INTR_HPD_RISE | HDMITX_TOP_INTR_HPD_FALL);
/* Unmask interrupts */
@@ -515,8 +577,8 @@ static irqreturn_t dw_hdmi_top_irq(int irq, void *dev_id)
struct meson_dw_hdmi *dw_hdmi = dev_id;
u32 stat;
- stat = dw_hdmi_top_read(dw_hdmi, HDMITX_TOP_INTR_STAT);
- dw_hdmi_top_write(dw_hdmi, HDMITX_TOP_INTR_STAT_CLR, stat);
+ stat = dw_hdmi->data->top_read(dw_hdmi, HDMITX_TOP_INTR_STAT);
+ dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_INTR_STAT_CLR, stat);
/* HPD Events, handle in the threaded interrupt handler */
if (stat & (HDMITX_TOP_INTR_HPD_RISE | HDMITX_TOP_INTR_HPD_FALL)) {
@@ -686,7 +748,9 @@ static const struct drm_encoder_helper_funcs
static int meson_dw_hdmi_reg_read(void *context, unsigned int reg,
unsigned int *result)
{
- *result = dw_hdmi_dwc_read(context, reg);
+ struct meson_dw_hdmi *dw_hdmi = context;
+
+ *result = dw_hdmi->data->dwc_read(dw_hdmi, reg);
return 0;
@@ -695,7 +759,9 @@ static int meson_dw_hdmi_reg_read(void *context, unsigned int reg,
static int meson_dw_hdmi_reg_write(void *context, unsigned int reg,
unsigned int val)
{
- dw_hdmi_dwc_write(context, reg, val);
+ struct meson_dw_hdmi *dw_hdmi = context;
+
+ dw_hdmi->data->dwc_write(dw_hdmi, reg, val);
return 0;
}
@@ -709,6 +775,20 @@ static const struct regmap_config meson_dw_hdmi_regmap_config = {
.fast_io = true,
};
+static const struct meson_dw_hdmi_data meson_dw_hdmi_gx_data = {
+ .top_read = dw_hdmi_top_read,
+ .top_write = dw_hdmi_top_write,
+ .dwc_read = dw_hdmi_dwc_read,
+ .dwc_write = dw_hdmi_dwc_write,
+};
+
+static const struct meson_dw_hdmi_data meson_dw_hdmi_g12a_data = {
+ .top_read = dw_hdmi_g12a_top_read,
+ .top_write = dw_hdmi_g12a_top_write,
+ .dwc_read = dw_hdmi_g12a_dwc_read,
+ .dwc_write = dw_hdmi_g12a_dwc_write,
+};
+
static bool meson_hdmi_connector_is_available(struct device *dev)
{
struct device_node *ep, *remote;
@@ -735,6 +815,7 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
void *data)
{
struct platform_device *pdev = to_platform_device(dev);
+ const struct meson_dw_hdmi_data *match;
struct meson_dw_hdmi *meson_dw_hdmi;
struct drm_device *drm = data;
struct meson_drm *priv = drm->dev_private;
@@ -751,6 +832,12 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
return -ENODEV;
}
+ match = of_device_get_match_data(&pdev->dev);
+ if (!match) {
+ dev_err(&pdev->dev, "failed to get match data\n");
+ return -ENODEV;
+ }
+
meson_dw_hdmi = devm_kzalloc(dev, sizeof(*meson_dw_hdmi),
GFP_KERNEL);
if (!meson_dw_hdmi)
@@ -758,6 +845,7 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
meson_dw_hdmi->priv = priv;
meson_dw_hdmi->dev = dev;
+ meson_dw_hdmi->data = match;
dw_plat_data = &meson_dw_hdmi->dw_plat_data;
encoder = &meson_dw_hdmi->encoder;
@@ -858,24 +946,28 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
reset_control_reset(meson_dw_hdmi->hdmitx_phy);
/* Enable APB3 fail on error */
- writel_bits_relaxed(BIT(15), BIT(15),
- meson_dw_hdmi->hdmitx + HDMITX_TOP_CTRL_REG);
- writel_bits_relaxed(BIT(15), BIT(15),
- meson_dw_hdmi->hdmitx + HDMITX_DWC_CTRL_REG);
+ if (!meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
+ writel_bits_relaxed(BIT(15), BIT(15),
+ meson_dw_hdmi->hdmitx + HDMITX_TOP_CTRL_REG);
+ writel_bits_relaxed(BIT(15), BIT(15),
+ meson_dw_hdmi->hdmitx + HDMITX_DWC_CTRL_REG);
+ }
/* Bring out of reset */
- dw_hdmi_top_write(meson_dw_hdmi, HDMITX_TOP_SW_RESET, 0);
+ meson_dw_hdmi->data->top_write(meson_dw_hdmi,
+ HDMITX_TOP_SW_RESET, 0);
msleep(20);
- dw_hdmi_top_write(meson_dw_hdmi, HDMITX_TOP_CLK_CNTL, 0xff);
+ meson_dw_hdmi->data->top_write(meson_dw_hdmi,
+ HDMITX_TOP_CLK_CNTL, 0xff);
/* Enable HDMI-TX Interrupt */
- dw_hdmi_top_write(meson_dw_hdmi, HDMITX_TOP_INTR_STAT_CLR,
- HDMITX_TOP_INTR_CORE);
+ meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_INTR_STAT_CLR,
+ HDMITX_TOP_INTR_CORE);
- dw_hdmi_top_write(meson_dw_hdmi, HDMITX_TOP_INTR_MASKN,
- HDMITX_TOP_INTR_CORE);
+ meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_INTR_MASKN,
+ HDMITX_TOP_INTR_CORE);
/* Bridge / Connector */
@@ -924,9 +1016,14 @@ static int meson_dw_hdmi_remove(struct platform_device *pdev)
}
static const struct of_device_id meson_dw_hdmi_of_table[] = {
- { .compatible = "amlogic,meson-gxbb-dw-hdmi" },
- { .compatible = "amlogic,meson-gxl-dw-hdmi" },
- { .compatible = "amlogic,meson-gxm-dw-hdmi" },
+ { .compatible = "amlogic,meson-gxbb-dw-hdmi",
+ .data = &meson_dw_hdmi_gx_data },
+ { .compatible = "amlogic,meson-gxl-dw-hdmi",
+ .data = &meson_dw_hdmi_gx_data },
+ { .compatible = "amlogic,meson-gxm-dw-hdmi",
+ .data = &meson_dw_hdmi_gx_data },
+ { .compatible = "amlogic,meson-g12a-dw-hdmi",
+ .data = &meson_dw_hdmi_g12a_data },
{ }
};
MODULE_DEVICE_TABLE(of, meson_dw_hdmi_of_table);
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.h b/drivers/gpu/drm/meson/meson_dw_hdmi.h
index 0b81183125e3..03e2f0c1a2d5 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.h
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.h
@@ -21,9 +21,12 @@
#define __MESON_DW_HDMI_H
/*
- * Bit 7 RW Reserved. Default 1.
- * Bit 6 RW Reserved. Default 1.
- * Bit 5 RW Reserved. Default 1.
+ * Bit 15-10: RW Reserved. Default 1 starting from G12A
+ * Bit 9 RW sw_reset_i2c starting from G12A
+ * Bit 8 RW sw_reset_axiarb starting from G12A
+ * Bit 7 RW Reserved. Default 1, sw_reset_emp starting from G12A
+ * Bit 6 RW Reserved. Default 1, sw_reset_flt starting from G12A
+ * Bit 5 RW Reserved. Default 1, sw_reset_hdcp22 starting from G12A
* Bit 4 RW sw_reset_phyif: PHY interface. 1=Apply reset; 0=Release from reset.
* Default 1.
* Bit 3 RW sw_reset_intr: interrupt module. 1=Apply reset;
@@ -39,12 +42,16 @@
#define HDMITX_TOP_SW_RESET (0x000)
/*
+ * Bit 31 RW free_clk_en: 0=Enable clock gating for power saving; 1= Disable
* Bit 12 RW i2s_ws_inv:1=Invert i2s_ws; 0=No invert. Default 0.
* Bit 11 RW i2s_clk_inv: 1=Invert i2s_clk; 0=No invert. Default 0.
* Bit 10 RW spdif_clk_inv: 1=Invert spdif_clk; 0=No invert. Default 0.
* Bit 9 RW tmds_clk_inv: 1=Invert tmds_clk; 0=No invert. Default 0.
* Bit 8 RW pixel_clk_inv: 1=Invert pixel_clk; 0=No invert. Default 0.
- * Bit 4 RW cec_clk_en: 1=enable cec_clk; 0=disable. Default 0.
+ * Bit 7 RW hdcp22_skpclk_en: starting from G12A, 1=enable; 0=disable
+ * Bit 6 RW hdcp22_esmclk_en: starting from G12A, 1=enable; 0=disable
+ * Bit 5 RW hdcp22_tmdsclk_en: starting from G12A, 1=enable; 0=disable
+ * Bit 4 RW cec_clk_en: 1=enable cec_clk; 0=disable. Default 0. Reserved for G12A
* Bit 3 RW i2s_clk_en: 1=enable i2s_clk; 0=disable. Default 0.
* Bit 2 RW spdif_clk_en: 1=enable spdif_clk; 0=disable. Default 0.
* Bit 1 RW tmds_clk_en: 1=enable tmds_clk; 0=disable. Default 0.
@@ -53,6 +60,8 @@
#define HDMITX_TOP_CLK_CNTL (0x001)
/*
+ * Bit 31:28 RW rxsense_glitch_width: starting from G12A
+ * Bit 27:16 RW rxsense_valid_width: starting from G12A
* Bit 11: 0 RW hpd_valid_width: filter out width <= M*1024. Default 0.
* Bit 15:12 RW hpd_glitch_width: filter out glitch <= N. Default 0.
*/
@@ -61,6 +70,9 @@
/*
* intr_maskn: MASK_N, one bit per interrupt source.
* 1=Enable interrupt source; 0=Disable interrupt source. Default 0.
+ * [ 7] rxsense_fall starting from G12A
+ * [ 6] rxsense_rise starting from G12A
+ * [ 5] err_i2c_timeout starting from G12A
* [ 4] hdcp22_rndnum_err
* [ 3] nonce_rfrsh_rise
* [ 2] hpd_fall_intr
@@ -73,6 +85,9 @@
* Bit 30: 0 RW intr_stat: For each bit, write 1 to manually set the interrupt
* bit, read back the interrupt status.
* Bit 31 R IP interrupt status
+ * Bit 7 RW rxsense_fall starting from G12A
+ * Bit 6 RW rxsense_rise starting from G12A
+ * Bit 5 RW err_i2c_timeout starting from G12A
* Bit 2 RW hpd_fall
* Bit 1 RW hpd_rise
* Bit 0 RW IP interrupt
@@ -80,6 +95,9 @@
#define HDMITX_TOP_INTR_STAT (0x004)
/*
+ * [7] rxsense_fall starting from G12A
+ * [6] rxsense_rise starting from G12A
+ * [5] err_i2c_timeout starting from G12A
* [4] hdcp22_rndnum_err
* [3] nonce_rfrsh_rise
* [2] hpd_fall
@@ -91,6 +109,8 @@
#define HDMITX_TOP_INTR_CORE BIT(0)
#define HDMITX_TOP_INTR_HPD_RISE BIT(1)
#define HDMITX_TOP_INTR_HPD_FALL BIT(2)
+#define HDMITX_TOP_INTR_RXSENSE_RISE BIT(6)
+#define HDMITX_TOP_INTR_RXSENSE_FALL BIT(7)
/* Bit 14:12 RW tmds_sel: 3'b000=Output zero; 3'b001=Output normal TMDS data;
* 3'b010=Output PRBS data; 3'b100=Output shift pattern. Default 0.
@@ -140,7 +160,9 @@
*/
#define HDMITX_TOP_REVOCMEM_STAT (0x00D)
-/* Bit 0 R filtered HPD status. */
+/* Bit 1 R filtered RxSense status
+ * Bit 0 R filtered HPD status.
+ */
#define HDMITX_TOP_STAT0 (0x00E)
#endif /* __MESON_DW_HDMI_H */
--
2.21.0
More information about the dri-devel
mailing list