[PATCH v2 22/25] drm/mediatek: adjust ddp clock control flow

yongqiang.niu at mediatek.com yongqiang.niu at mediatek.com
Wed Mar 27 06:19:18 UTC 2019


From: Yongqiang Niu <yongqiang.niu at mediatek.com>

display hardware clock will not unprepare when
crtc is disable, until crtc is destroyed.
with this patch, hard clock will disable and unprepare
at the same time.

Signed-off-by: Yongqiang Niu <yongqiang.niu at mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 26 ++++++--------------------
 1 file changed, 6 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 0f97ee3..606c6e2 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -195,7 +195,7 @@ static int mtk_crtc_ddp_clk_enable(struct mtk_drm_crtc *mtk_crtc)
 
 	DRM_DEBUG_DRIVER("%s\n", __func__);
 	for (i = 0; i < mtk_crtc->ddp_comp_nr; i++) {
-		ret = clk_enable(mtk_crtc->ddp_comp[i]->clk);
+		ret = clk_prepare_enable(mtk_crtc->ddp_comp[i]->clk);
 		if (ret) {
 			DRM_ERROR("Failed to enable clock %d: %d\n", i, ret);
 			goto err;
@@ -205,7 +205,7 @@ static int mtk_crtc_ddp_clk_enable(struct mtk_drm_crtc *mtk_crtc)
 	return 0;
 err:
 	while (--i >= 0)
-		clk_disable(mtk_crtc->ddp_comp[i]->clk);
+		clk_disable_unprepare(mtk_crtc->ddp_comp[i]->clk);
 	return ret;
 }
 
@@ -215,7 +215,7 @@ static void mtk_crtc_ddp_clk_disable(struct mtk_drm_crtc *mtk_crtc)
 
 	DRM_DEBUG_DRIVER("%s\n", __func__);
 	for (i = 0; i < mtk_crtc->ddp_comp_nr; i++)
-		clk_disable(mtk_crtc->ddp_comp[i]->clk);
+		clk_disable_unprepare(mtk_crtc->ddp_comp[i]->clk);
 }
 
 static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
@@ -615,15 +615,7 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
 		if (!comp) {
 			dev_err(dev, "Component %pOF not initialized\n", node);
 			ret = -ENODEV;
-			goto unprepare;
-		}
-
-		ret = clk_prepare(comp->clk);
-		if (ret) {
-			dev_err(dev,
-				"Failed to prepare clock for component %pOF: %d\n",
-				node, ret);
-			goto unprepare;
+			return ret;
 		}
 
 		mtk_crtc->ddp_comp[i] = comp;
@@ -649,23 +641,17 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
 		ret = mtk_plane_init(drm_dev, &mtk_crtc->planes[zpos],
 				     BIT(pipe), type);
 		if (ret)
-			goto unprepare;
+			return ret;
 	}
 
 	ret = mtk_drm_crtc_init(drm_dev, mtk_crtc, &mtk_crtc->planes[0],
 				mtk_crtc->layer_nr > 1 ? &mtk_crtc->planes[1] :
 				NULL, pipe);
 	if (ret < 0)
-		goto unprepare;
+		return ret;
 	drm_mode_crtc_set_gamma_size(&mtk_crtc->base, MTK_LUT_SIZE);
 	drm_crtc_enable_color_mgmt(&mtk_crtc->base, 0, false, MTK_LUT_SIZE);
 	priv->num_pipes++;
 
 	return 0;
-
-unprepare:
-	while (--i >= 0)
-		clk_unprepare(mtk_crtc->ddp_comp[i]->clk);
-
-	return ret;
 }
-- 
1.8.1.1.dirty



More information about the dri-devel mailing list