[PATCH] drm/bridge: sii902x: initialize CEC device

[Yannick Fertré]

Initialize the CEC device embedded into sii902x bridge. By default,
the CEC device must be disabled to allow other CEC devices to bypass
the bridge.

Signed-off-by: Yannick Fertré <yannick.fertre at st.com>
---
 drivers/gpu/drm/bridge/sii902x.c | 64 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
index 08e12fe..d33c097 100644
--- a/drivers/gpu/drm/bridge/sii902x.c
+++ b/drivers/gpu/drm/bridge/sii902x.c
@@ -83,9 +83,15 @@
 
 #define SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS	500
 
+#define SII902X_CEC_I2C_ADDR_DEFAULT		0x60
+#define SII902X_CEC_SETUP			0x8e
+#define CEC_EN					BIT(4)
+
 struct sii902x {
 	struct i2c_client *i2c;
+	struct i2c_client *i2c_cec;
 	struct regmap *regmap;
+	struct regmap *regmap_cec;
 	struct drm_bridge bridge;
 	struct drm_connector connector;
 	struct gpio_desc *reset_gpio;
@@ -331,6 +337,22 @@ static const struct regmap_config sii902x_regmap_config = {
 	.cache_type = REGCACHE_NONE,
 };
 
+static const struct regmap_range sii902x_cec_volatile_ranges[] = {
+	{ .range_min = 0x84, .range_max = 0xe4 },
+};
+
+static const struct regmap_access_table sii902x_cec_volatile_table = {
+	.yes_ranges = sii902x_cec_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sii902x_cec_volatile_ranges),
+};
+
+static const struct regmap_config sii902x_cec_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_table = &sii902x_cec_volatile_table,
+	.cache_type = REGCACHE_NONE,
+};
+
 static irqreturn_t sii902x_interrupt(int irq, void *data)
 {
 	struct sii902x *sii902x = data;
@@ -460,6 +482,39 @@ static int sii902x_i2c_bypass_deselect(struct i2c_mux_core *mux, u32 chan_id)
 	return 0;
 }
 
+int sii902x_cec_init(struct device *dev, struct sii902x *sii902x)
+{
+	struct i2c_client *client;
+	int ret;
+
+	client = i2c_new_secondary_device(sii902x->i2c, "cec",
+					  SII902X_CEC_I2C_ADDR_DEFAULT);
+	if (!client)
+		return -EINVAL;
+
+	sii902x->i2c_cec = client;
+
+	i2c_set_clientdata(sii902x->i2c_cec, sii902x);
+
+	sii902x->regmap_cec = devm_regmap_init_i2c(sii902x->i2c_cec,
+						   &sii902x_cec_regmap_config);
+	if (IS_ERR(sii902x->regmap_cec)) {
+		ret = PTR_ERR(sii902x->regmap_cec);
+		goto err;
+	}
+
+	/*
+	 * By default, CEC must be disabled to allow other CEC devives
+	 * to bypass the bridge.
+	 */
+	regmap_update_bits(sii902x->regmap_cec, SII902X_CEC_SETUP, CEC_EN, 0);
+
+	return 0;
+err:
+	i2c_unregister_device(sii902x->i2c_cec);
+	return ret;
+}
+
 static int sii902x_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -542,7 +597,16 @@ static int sii902x_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	sii902x->i2cmux->priv = sii902x;
+
+	ret = sii902x_cec_init(dev, sii902x);
+	if (ret)
+		goto err;
+
 	return i2c_mux_add_adapter(sii902x->i2cmux, 0, 0, 0);
+err:
+	drm_bridge_remove(&sii902x->bridge);
+
+	return ret;
 }
 
 static int sii902x_remove(struct i2c_client *client)
-- 
2.7.4